SIMATIC S7 LEUKHARDT

SIMATIC PG; ADAPTER FOR MMC PROGRAMMING IN THE PG 720 AND PG 740

SIMATIC S7-400; UR1 RACK; CENTRALIZED AND DISTRIBUTED WITH 18 SLOTS

SIMATIC S7-400; IM460-3 TRANSMITTER INTERFACE MODULE; FOR DISTRIBUTED CONNECTION UP TO 102 M; WITH K BUS

SIMATIC S7-400; BACK-UP BATTERY 3.6 V/2.3 AH FOR PS 405 4A/10A/20A AND PS 407 4A/10A/20A

SIMATIC S7-300; CABLE CELL LK 393 FOR EX (I) MODULES L+ AND M INTRINSICALLY SAFE CONNECTIONS TO TERMINALS 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300/-400; MANUAL COMMUNICATION FOR S7-300/-400; SPANISH

SIMATIC S7-300; MANUAL CONFIGURATION; CPU DATA; MODULE DATA; OPERATIONS LIST; PAPER VERSION; GERMAN

SIMATIC S7-400H; 412-3H SYSTEM-BUNDLE H-SYSTEM WITH 2 X MC 1MB RAM; 1 X UR2-H; 2 X PS407 UC120/230V; 10A 4 X SYNC-MODULE 10M 2 X SYNC-CABLE 1M 2 X CPU 412-3H 4 X BACK-UP BATTERIES

SIMATIC S7-400; CR2 RACK; CENTRALIZED;18 SLOTS;2 SEGMENTS 2 REDUNDANT PS PLUGGABLE

SIMATIC S7-400; ER1 EXPANSION RACK ALU; WITH 18 SLOTS; FOR SIGNAL MODULES ONLY; 2 REDUNDANT PS PLUGGABLE

SIMATIC S7-400; FAN SUBASSEMBLY FOR SUBRACK WITH 18 SLOTS; 120/230 V AC

SIMATIC S7-400; CPU 412-1 CENTRAL PROCESSING UNIT WITH: 144 KB WORKING MEMORY; (72 KB CODE; 72 KB DATA); INTERFACE MPI/DP 12 MBIT/S

SIMATIC S7-400; CPU 416-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE 512 KB WORKING MEMORY

SIMATIC S7-400H; CPU 417H CENTRAL UNIT FOR S7-400H 4 INTERFACES: 1 MPI/DP; 1 DP A. 2 FOR SYNC MODULES 20MB MEMORY (10MB CODE/10MB DATA)

SIMATIC S7-400; DIGITAL INPUT SM 421; OPTIC. ISOLATED; 16 DI; 120 V AC; WITH 1 COMMON POINT

SIMATIC S7-400; TERMINATOR FOR RECEIVER IM461-4 INTERFACE MOD.

SIMATIC S7/PCS7; SM 322 DIGITAL OUTPUT MODULE; 16 DO; DC 24 V / 0;5A; CAPABLE OF DIAGNOSTICS; WIRE BREAK DETECTION TO 0 AND 1 SIGNAL; 1 X 40-PIN; INTERFACE MODULE IM 153-2 NECESSARY

SIMATIC S7;SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION; 4 AO; 15 BIT RESOLUTION; 0-10V; 1-5V; +/-10V; +/-20MA; 0/4 - 20MA; 20 PIN; FIT FOR ISOCHRONE MODE

FAST ANALOG HYBRID MODULE FOR SIMATIC S7-300 MANUAL; CURRENT EDITION GERMAN

SIMATIC S7-300; MANUAL F. POSITIONING MODULE FM354 GERMAN

SIMATIC S7-300; TEMPERATURE CONTROL MODULE FM 355-2 C; 4 CHANNELS; CONTIN. 4 AI + 8 DI + 4 AO INCL. MULTI-LANG CONFIG. PACK.; MANUAL AND GETTING STARTED (GER/EN/IT) ON CD-ROM

FM 357-2 MANUAL; GERMAN CURRENT EDITION

SIMATIC S7-300; RAIL L=885MM FOR INSTALLATION FROM ET200ISP IN 900MM CABINET

SIMATIC S7-300; INSTALLATION ADAPTER FOR SNAPPING THE PS307 ONTO THE 35 MM DIN RAIL

S7-300; TERMINAL BLOCK WITH SPRING-LOAD TERMINALS FOR 64 CHANNEL MODULES OF S7-300; 2 PIECES PER PACKAGING UNIT.

SIMATIC S7-300; 10 DIN A4 LABELLING SHEETS COLOR: LIGHT-BEIGE; 10 LABELLING STRIPS/SHEETS FOR SIGNAL MODULES (16 CHANNELS); MATERIAL: MEMBRANE; PREPERFO- RATED; FOR PRINTING ON A LASER PRINTER; 10 SHEETS PER PACKAGING UNIT

SIMATIC S7-300; 10 DIN A4 LABELLING SHEETS COLOR: YELLOW; 10 LABELLING STRIPS/SHEETS FOR SIGNAL MODULES (32 CHANNELS); MATERIAL: MEMBRANE; PREPERFO- RATED; FOR PRINTING ON A LASER PRINTER; 10 SHEETS PER PACKAGING UNIT

SIMATIC S7-300;LABELLING STRIPS FOR F - MODULES (SPARE PART) 10 PIECES PER PACKAGING UNIT

SIMATIC FIELD PG M3 PREMIUM/S5 (HDD); CORE I5-520M; 2.4GHZ; DL MULTISTANDARD DVD RW; 500GB S-ATA HDD; WITH S5 INTERFACE; WITH S5 -EPROMMER; INCL. EPROM ADAPTER AND S5-PLC CABLE; 15;6" DISPLAY; HD READY (1366 X 768); KEYBOARD QWERTY (& GERMAN); POWER CABLE FOR:UNITED KINGDOM; APPROVAL F. EUROPE (CE) WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; STANDARD: 1X 2GB DDR3 RAM: PREMIUM: 3GB DDR3 RAM (1X 1GB; 1X 2GB); LICENSE STEP7 PROF V11; WINCC ADV. V11; STEP5; STEP7 MICROWIN; WINCC FLEXIBLE ADV.; (V11 LICENSES ARE VALID FOR STEP7 PROF. 2010 AND WINCC FLEX. ADV. 2008); VERSION OF SOFTWARE 02/2012

SIMATIC FIELD PG M3 PREMIUM/S5 (HDD); CORE I5-520M; 2.4GHZ; DL MULTISTANDARD DVD RW; 500GB S-ATA HDD; WITH S5-INTERFACE; WITH S5-EPROMMER; INCL. EPROM ADAPTER AND S5-PLC CABLE; 15;6" DISPLAY; FULL HD (1920 X 1080); KEYBOARD QWERTY (& GERMAN); POWER CABLE FOR:UNITED KINGDOM; APPROVAL F. EUROPE (CE) WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; STANDARD: 1X 2GB DDR3 RAM: PREMIUM: 3GB DDR3 RAM (1X 1GB; 1X 2GB); LICENSE STEP7 PROF V11; WINCC ADV. V11; STEP5; STEP7 MICROWIN; WINCC FLEXIBLE ADV.; (V11 LICENSES ARE VALID FOR STEP7 PROF. 2010 AND WINCC FLEX. ADV. 2008); VERSION OF SOFTWARE 02/2012

SIMATIC FIELD PG PENTIUM 4; PENTIUM 4 - 2.2 GHZ; 512 KB 2ND LEVEL CACHE; STEP 7 PROFESSIONAL; STEP 7 MICROWIN; ; 1 GB RAM (2X512 MB DDR-RAM); TFT SXGA+ (1400 X 1050) + DVD-ROM / DVD-R/-RW DRIVE; 80 GBYTES HDD EIDE; WINDOWS XP PROF. ENGLISH + MUI GFSI; POWER CABLE: D;F;NL;SP;B;A;S; FIN & KEYBOARD: F; B; SUI; STEP SOFTWARE INST. 01/2004

SIMATIC RACK PC 840; AGP GRAPHICS;ONBOARD; 16 MBYTE; 10/100 MBIT'S ETHERNET RJ45; 1XUSB FRONTS.; 2XUSB REARSIDE; WATCHDOG;TEMPERATURE MONITORING CARD RETAINER; 5 PCI (LONG); 2 PCI/ISA (LONG); 3 ISA (LONG); PROCESSOR: CELERON 566 MHZ; 66MHZ FSB; 128 KB SLC; DRIVES: EIDE 40 GB HDD; FRONT MOUNTING 0.3 G VIBRATION; 3 G SHOCK; 64 MBYTE SD-RAM-133 (1X64 MB); FLOPPY DISK 1.44 MB; 3.5"; 110/230V INDUSTRY POWER PACK WITH NAMUR; POWER CABLE EUROPE; MS-DOS 6.22 ENGLISH; WITHOUT EXTENSIONS

SIMATIC S7-1500; MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT; INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS; FUSES OR RELAYS

SIMATIC FIELD PG PENTIUM 4; PENTIUM 4 - 2.2 GHZ; 512 KB 2ND LEVEL CACHE; STEP 7; STEP 7 MICROWIN; ; 512 MB RAM (1X512 MB DDR-RAM); TFT XGA (1024 X 768) + DVD-ROM / DVD-R/-RW DRIVE; 80 GBYTES HDD EIDE; WINDOWS XP PROF. ENGLISH + MUI GFSI; POWER CABLE FOR: GER;FR;NL;SP;BEL;AUSTRIA;SWD; FIN; STEP SOFTWARE INST. 01/2004

SIMATIC FIELD PG M3 PREMIUM (HDD); CORE I5-520M; 2.4GHZ; DL MULTISTANDARD DVD RW; 500GB S-ATA HDD; W/O S5-INTERFACE; W/O S5-EPROMMER; 15;6" DISPLAY; HD READY (1366 X 768); KEYBOARD QWERTY (& GERMAN); POWER CABLE FOR: GE; FR NL; ES; BE; AT; SE; FI; CH; IT; APPROVAL F. EUROPE (CE) WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; STANDARD: 1X 2GB DDR3 RAM: PREMIUM: 3GB DDR3 RAM (1X 1GB; 1X 2GB); TRIAL LICENSE FOR STEP7 PROF; WINCC FLEXIBLE ADV.; VERSION OF SOFTWARE 04/2010

SIMATIC FIELD PG M4 PREMIUM PLUS; CORE I7-35X0M (4M CACHE; 2;9GHZ; UP TO 3.6 GHZ WITH TURBO-BOOST-TECHNOLOGY); DVD RW OPTICAL DRIVE; HD-GRAPHIC 4000; SOLID STATE DRIVE SATA 300 GB; W/O S5-INTERFACE; W/O S5-EPROMMER; 15;6" DISPLAY; FULL HD (1920 X 1080); KEYBOARD AZERTY (&FRENCH); POWER CABLE FOR: GER; FR;NL;SP;BEL;AT;SWD;FIN; WINDOWS 7 ULTIMATE SP1; 64-BIT (EN/GE/FR/SP/IT); 2X 8GB RAM; NOTE: STEP 5 AND STEP 7-MICRO/WIN NOT PREINSTALLED. STEP5 INCOMPATIBLE WITH WINDOWS 7; LICENSE FOR STEP7 PROF COMBO (V13/2010); WINCC ADVANCED COMBO (V13/WINCC FLEXIBLE 2008); STEP7 MICRO/WIN V4.0; WITH MPI CABLE; VERSION OF SOFTWARE V13.0.1.0

SIMATIC S7-400; IM CABLE WITH K BUS; 5 M

SIMATIC S7-400; IM CABLE; 450 M

INTERFACE MODULE TPM478-2 FOR CONNECTION OF TELEPERM M I/O- MODULES TO PCS7-AUTOMATION SYSTEMS

SIMATIC S7-400; FRONT CONNECTOR FOR SIGNAL MODULES; FOR CRIMP SNAP-IN CONTACT; 48-POLE 84 PIECES PER PACKAGING UNIT

SIMATIC S7-400; COVER FOIL FOR LABELLING STRIPS FOR SIGNAL MODULES; SPARE PART 10 PIECES PER PACKAGE

SIMATIC S7-400; MANUAL S7-400 PROGR. LOGIC CONTROLLER; ASSEMBLY; MODULE DATA; PAPER VERSION; ENGLISH

SIMATIC S7-400; MANUAL S7-400 PROGR. LOGIC CONTROLLER; ASSEMBLY; MODULE DATA; PAPER VERSION; FRENCH

SIMATIC S7-400;INSTRUCTION LIST ITALIAN

SIMATIC PG; SUPPLY CABLE 3M FOR FIELD PG M5/M4/M2 FOR UNITED KINGDOM

SIMATIC FIELD PG PENTIUM 4; PENTIUM 4 - 2.2 GHZ; 512 KB 2ND LEVEL CACHE; UPGRADE INSTALLATION; ; 512 MB RAM (1X512 MB DDR-RAM); TFT SXGA+ (1400 X 1050) + DVD-ROM / CD-RW DRIVE; 80 GBYTES HDD EIDE; WINDOWS 2000 ITALIAN; POWER CABLE FOR: ITALY; STEP SOFTWARE INST. 08/2004

SIMATIC C7-613; COMPACT UNIT WITH 4 LINE DISPLAY; KEYS AND S7-300 CPU313C WITH 24 DI; 16 DO; 5 AI; 2 AO; MICRO MEMORY CARD AND CONNECTOR SET REQUIRED

SIMATIC M7-300; EXM378-3 EXPANSION MODULE FOR THE USE OF 3 IF MODULES

SIMATIC S7-400; PS 405 POWER SUPPLY; WIDE RANGE 10A; 24/48/60V DC; 5V/10A DC FOR REDUNDANT USE

6ES7317-2FK14-0AB0 - SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 1.5 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

SIMATIC M7-300; MSM378 MASS STORAGE MODULE WITH 3.5" FLOPPY DISK DRIVE AND 500 MB HARD DISK

INTERFACE MODULE TPM478-1 FOR CS275 20-M LOCAL BUS AND FOR TELEPERM M I/O-MODULES

SIMATIC PC ACCESSORY; PLUG-IN HDD REMOVABLE DRIVE FRAME FOR 3.5" HARD DISK; SATA;(OHNE HARD DISK); FOR SIMATIC RACK PC

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 16 DI; 24 V DC; 20 PIN

SIMATIC S7-300; DIGITAL MODULE SM 323; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE 8 DI/8 DO; 24V DC; 0.5A; TOTAL CURRENT 2 A; 20 PIN

SIMATIC SC;TWISTED-RIBBON CABLE FOR THE CONNECTION WITH IM 464; UNSHIELDED; 30 M

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO; 24V DC; 2A; 20 PIN

SIMATIC S7-300;INTERFACE MODULE IM 360 IN CENTRAL RACK FOR CONNECTING MAX. 3 EXPANSION RACKS

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 16 DI; 24V DC; 20 PIN; PROCESS INTERRUPT; DIAGNOSTICS

SIMATIC FIELD PG M2 PREMIUM 2.2 GHZ CORE 2 DUO (T7500); DL MULTISTANDARD DVD RW; 15" SXGA+ DISPLAY (1400 X 1050) 250GB S-ATA HDD; 1X2GB DDR2 RAM POWER CABLE: D;F;NL;SP;B;A;S; FIN & KEYBOARD: F; B; SUI; WLAN APPROVAL F. EUROPE MODEM APPROVAL FOR EUROPE; WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; LICENSE STEP7 PROF; STEP5; STEP7 MICROWIN; STEP7 BASIC AND WINCC FLEXIBLE ADV.; INCL. EPROM ADAPTER AND S5-PLC CABLE; VERSION OF SOFTWARE 08/2008

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 2 AO; U/I; 11/12 BITS RESOL.; 20 PI

SIMATIC IPC427C BUNDLE; WINCC FLEXIBLE 2008/WINAC; COMPRENANT: MICROBOX 6ES7671-1D...-.AA0; CORE2 DUO 1;2 GHZ; 800 MHZ FSB; 1 X PB DP; 2 X IE 1 GBIT; LOGICIEL PREINSTALLE; 4 GO DDR3 1066; SODIMM; WINDOWS EMBEDDED STANDARD 2009; 80 GO SOLID STATE DRIVE SATA (STANDARD); SANS LECTEUR AMOVIBLE (UNIQUEM. AVEC LECTEUR INT.); WINAC RTX F 2010; WINCC FLEXIBLE 2008 RT 512 PT

SIMATIC FIELD PG M4 PREMIUM PLUS; CORE I7-35X0M (4M CACHE; 2;9GHZ; UP TO 3.6 GHZ WITH TURBO-BOOST-TECHNOLOGY); DVD RW OPTICAL DRIVE; HD-GRAPHIC 4000; SOLID STATE DRIVE SATA 480 GB; WITH-INTERFACE; WITH S5-EPROMMER; INCL. S5-PLC CABLE AND EPROM ADAPTER; 15;6'' DISPLAY; FULL HD (1920 X 1080); KEYBOARD AZERTY (&FRENCH); POWER CABLE FOR: GER; FR;NL;SP;BEL;AT;SWD;FIN; DUALBOOT (WIN XP/WIN 7); WINDOWS XP PROF. SP3 AND WINDOWS 7 ULTIMATE SP1; 64-BIT 2X 8 GB RAM; LICENSE FOR STEP7 PROF COMBO (V13/2010); WINCC ADVANCED COMBO (V13/WINCC FLEXIBLE 2008); STEP7 MICRO/WIN V4.0; STEP5; WITH MPI CABLE; VERSION OF SOFTWARE V13.0.1.0

CARTE DE COUPLAGE POUR LES AUTOMATES SIEMENS SIMATIC S7 300 IBS S7 300 DSC/I-T

SIMATIC S7-1200; ANALOG OUTPUT SB 1232; 1 AO; +/- 10VDC (12 BIT RES.) OR 0 - 20 MA (11 BIT RES)

SIMATIC M7-400; FM456-2 APPLICATION MODULE WITH PENTIUM 120 MHZ; 2 SUBMODULE SLOTS

SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 OR HIGHER

SINAUT ST7; TIM 32 D TELECONTROL UNIT FOR SIMATIC S7-300 WITH INT. MODEM MD2 FOR DEDICATED LINES INCL. DCF 77 RECEIVER MODULE

SINAUT ST7; TIM 4V TELECONTROL MODULE FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE

SINAUT ST7; TIM 44 D TELECONTROL UNIT FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE WITH INT. MODEM MD4 FOR EURO-ISDN INCL. DCF 77 RECEIVER MODULE

SINAUT ST7; TIM 4V D BN TELECONTROL MODULE FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE INCL. DCF 77 RECEIVER MODULE FOR APPLICATIONS WITH SPECIAL DRIVERS

SIPLUS S7-300 SM331 - 20-POLE -25 ... +70 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7KB02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 2 AI; AUFL. 9/12/14 BIT; U/I/THERMOEL./RESISTOR; ALARM; DIAGNOSTICS; 1 X 20-POLE; REMOVE/INSERT W. ACT. BACKPLANE

SIPLUS S7-300 FM350-2 FOR MEDIAL STRESS BASED ON 6ES7350-2AH00-0AE0

SIMATIC S7-300 TRAINING UNIT WITH CPU 315-2DP; 128 KB; COMPLETE INCL. SIMULATOR

MOBY-SP ASM 470 INTERFACE MODULE FOR SIMATIC S7-300

CONNECTING CABLE UNSHIELDED FOR SIMATIC S7-300/1500 BETWEEN FRONT CONNECTOR MODULE A. TERMINAL BLOCK 16 X 0.14MM2 WITH IDC CONNECTORS; LENGTH 2.5 M

SIMATIC PC ; COMPACTFLASH; 1 GB ; INDUSTRIAL GRADE

SIMATIC S7-200 CN; ANALOG I/O EM 235; FOR S7-22X CPU ONLY; 4 AI; DC +/-10V; 1AQ; DC +/-10V 12 BIT CONVERTER THIS S7-200 CN PRODUCT HAS CE APPROVAL ONLY

SIMATIC S7-200 CN; ANALOG INPUT EM 231; FOR S7-22X CPU ONLY; 4 AI; 0 - 10V DC; 12 BIT CONVERTER THIS S7-200 CN PRODUCT HAS CE APPROVAL ONLY

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16 DI; 120V AC; 20 PIN

SIMATIC S7-400; 413-2 DP CPU CENTRAL PROCESSING UNIT WITH: MULTI-POINT INTERFACE; INTEGRATED L2-DP INTERFACE 72 KB WORKING MEMORY

SIMATIC DP; TERMINAL MODULE TM-P15N23-A1 FOR ET 200S FOR POWER MODULES; 15MM WIDTH; FAST CONNECT TERMINAL; 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE

SIMATIC DP; BASIC MOD. BM142 F. ET 200X; 4DO 24V DC/2A 5-PIN M12; PROTECTION IP 66/67 INTEGR. PROFIBUS DP IF; 12 MBIT/S; INTEGR. PS INTERFACE

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH 20MA INTERFACE (TTY) INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-400; IF963-TTY INTERFACE MODULE W. TTY IF FOR PTP CONNECTION TO CP441 FROM CP 441- AA05

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH SLOT F. MC 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY

SIMATIC S7-300; RAIL L=2000MM

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI HIGH FEATURE 24V DC; 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT

SIMATIC S7-1500; CPU 1513-1 PN; CENTRAL PROCESSING UNIT WITH WORKING MEMORY 300 KB FOR PROGRAM AND 1.5 MB FOR DATA; 1. INTERFACE; PROFINET IRT WITH 2 PORT SWITCH; 40 NS BIT-PERFORMANCE; SIMATIC MEMORY CARD NECESSARY

SIMATIC DP; POWER MODULE PM 148 FOR ET 200X 4 DO; 24 24V DC/2 A WITH LOAD VOLTAGE INPUT; WITH DIAGNOSIS BY CHANNEL

SIMATIC RACK PC 840 V2; INTERFACES EMBARQUEES: 1X LAN (RJ45); 1X GRAPHIC(VGA); 2X SERIE; 1X PARALLELE; 2X SOURIS (PS/2); 1X USB 2.0 EN FACADE;1X USB 2.0 F.ARRIERE; 10 EMPLAC. (5X PCI LONG; 2XPCI/ISA LONG; 3X ISA LONG); SURVEILLANCE DE TEMPERATURE ET DU VENTILATEUR; WATCHDOG; BARRE DE MAINTIEN DES CARTES; PROCESSEUR: PENTIUM 4 2;4 GHZ; BUS FRONTAL 533 MHZ; AV. PROFIBUS/MPI; LECTEURS: DD 80 GO EIDE; VIBRATION 0;5 G; CHOC 5 G; INTERNE; SDRAM DDR 512 MO (1X512 MO); LECT. DISQUETTE 1;44 MO; 3;5"; + DVD-ROM; BLOC SECTEUR INDUSTRIEL 110/230V CA AVEC NAMUR; CABLE SECTEUR EUROPE; WINDOWS 2000 PROF. MULTILINGUE (AN;AL;FR;IT;ESP); SP4; SANS EXTENSIONS

SIMATIC S7-1500 COMPACT CPU CPU 1511C-1PN; CENTRAL PROCESSING UNIT WITH WORKING MEMORY 175 KB FOR PROGRAM AND 1 MB FOR DATA; 16 DIGITAL INPUTS; 16 DIGITAL OUTPUTS; 5 ANALOG INPUTS; 2 ANALOG OUTPUTS; 6 HIGH SPEED COUNTERS; 4 HIGH SPEED COUNTERS FOR PT

SIMATIC S7-400; CPU 414-3 PN/DP UNITE CENTRALE AVEC: MEMOIRE TRAVAIL 4 MO; (2 MO CODE; 2 MO DONNEES); INTERFACES INT. 1: MPI/DP 12 MBIT/S (X1); INT. 2: ETHERNET/PROFINET (X5) INT. 3: IF 964-DP ENFICH. (IF1)

SIMATIC S7-400 MOD. DE COUPLAGE CP 441-2 POUR CONNEXION POINT A POINT; 2 CANAUX; Y COMPRIS PROGICIEL DE CONFIGUR. SUR CD