Zentralprozessor

MVME162-510A EMBEDDED CONTROLLER 32 MHZ MC68040 MICROPROCESSOR WITH FLOATING-POINT COPROCESSOR 4 MB DRAM 512 KB SRAM 1 MB FLASH SERIAL PORT B INTERFACE: EIA-232-D (DCE) SERIAL INTERFACE MODULE; MODEL NUMBER: SIMM06

SCHNEIDER ELECTRIC BASE PROCESS UNY; TSXP57C024

HOT STANDBY DUAL BUS CPU CONTROL MODULE IC697CGR772

YASKAWA JANCD-XCP01-1 CONTROLLER BOARD

PROGRAMMABLE COPROCESSOR MODULE; 192 KBYTE (47 KBYTE BASIC PROGRAM); WITH PORT EXPANSION CABLE)

16.86132-0021 - MANROLAND VME.MCI-1 PC BOARD ASSEMBLY MODULE SYS68K/CPU-30BE/16/9

16.86132-0030 - MANROLAND ZSB.VME.MCI-2 CPU CARD

SIMATIC S7-400; CPU 412-2 CENTRAL PROCESSING UNIT WITH: 256 KB WORKING MEMORY; (128 KB CODE; 128 KB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP

SIMATIC S5; CPU 100 FOR S5-100U PC W.POWER SUPPLY UNIT 24V/9V DC W/O INSTRUCTION MANUAL

TSX PREMIUM 574X3 ETY PORT PROCESSOR MODULE

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE; INTEGRATED 24 V DC POWER SUPPLY 32 KBYTE WORKING MEMORY; MICRO MEMORY CARD NECESSARY

MICROLOGIX 1500 BASE 24V DC IN / RELAY OUT / AC POWER

SINUMERIK 840D/DE NCU 572.3; PROCESSEUR AMD K6-2 SANS LOGICIEL SYSTEME MEMOIRE: NC 0;5MO; AP 96KO PROFIBUS-DP PREPARE..

SLC 500 SLC 5/03 PROCESSOR; 8K MEMORY; DH485 & RS-232 COMMUNICATION. MAXIMUM USER MEMORY: 8K INSTRUCTIONS; MAXIMUM NUMBER OF I/O: 4096 IN AND 4096 OUT; MAXIMUM LOCAL ANALOG I/O: 480; PROGRAM SCAN TIME/KWORD: 1 MS; I/O SCAN TIME: 0.225 MS; MAXIMUM NUMBER OF LOCAL I/O CHASSIS: 3; MAXIMUM NUMBER OF I/O MODULE SLOTS IN THE LOCAL I/O CHASSIS: 30; COMMUNICATION PORTS : DH-485 & RS-232; BACKUP MEMORY: FLASH; STANDARD BATTERY-BACKED RAM.

SINUMERIK 840D/DE NCU 573.4; 650 MHZ; 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 2.5 MB; PLC 96 KB PREPARED FOR PROFIBUS DP

CPU UNIT 16 BUILT-IN DC INPUTS 256 I/O MAX 7.2K WORDS 6K

SIMATIC S7-300; CPU 314C-2 DP CPU COMPACTE AVEC MPI; 24 ET/16 ST; 4 EA; 2 SA; 1 PT100; 4 COMPTEURS RAPIDES (60 KHZ);INTERFACE DP INTEGR.; ALIMENTATION INTEGREE 24V CC; MEMOIRE DE TRAVAIL 48 KO

UNITY PROCESSOR - 2 RACKS (12 SLOTS) / 4 RACKS. (4/6/8 SLOTS) - 1650 MA; 5 V DC.

1757-PLX52 PROCESSLOGIX CPU CONTROLLER MODULE; CAN BE INSTALLED INTO ANY TWO CONSECUTIVE SLOTS OF THE CHASSIS (DEFAULT LOCATION IS SLOTS 1 AND 2);

GE FANUC CPU 350 MODULE (32K BYTES USER MEMORY; 4K I/O; 8 RACKS); NO BUILT-IN SERIAL PORTS .22MSEC/PROCESSOR (32K BYTES USER MEMORY; 4K I/O; 8 RACKS)

SIMODRIVE 611 POWER MODULE; 1 AXIS; 80 A; EXTERNAL COOLING; MOTOR RATED CURRENT: FEED = 28 A MAIN SPINDEL = 30 A

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE; INTEGRATED 24 V DC POWER SUPPLY 32 KBYTE WORKING MEMORY; MICRO MEMORY CARD NECESSARY

CPU + 1 PORT RS 232 JBUS

MICROLOGIX 1500 BASE DC IN / DC FET & RELAY OUT / DC POWER

ALTIVAR PROCESS ATV630 - VARIATEUR DE VITESSE - 30KW - IP21 - 400-480V

SIMATIC S7-400H; CPU 414H CENTRAL UNIT FOR S7-400H AND S7-400F/FH; 4 INTERFACES: 1 MPI/DP; 1 DP AND 2 FOR SYNC MODULES; 2.8 MB MEMORY (1.4 MB DATA/1.4 MB CODE)

CARTE UNITÉ CENTRALE APRIL 7000

LEROY SOMER MVS SERIE DC DRIVE 0.5 KW.

SIMATIC S5 941 CENTRAL PROCESSING UNIT F. S5-115U PC RAM; 2KBYTES

MODICON M340 - CPU - 1024 E/S TOR 256 E/S ANA - 1CAN - 1ETH.

CPU 331 MODULE(16 KBYTES USER PROGRAM MEMORY)

SINAMICS G120 CONTROL UNIT CU240S PN TYPE S STANDARD PROFINET 9 E TOR; 4 S TOR; 2 EA; 2 SA INTERFACE PTC/KTY RELAIS FREINAGE EM; INTERF. MMC INTERFACE CODEUR PROTECTION IP20 TEMP. AMBIANTE -10 A +50 DEG. SANS MODULE DE PUISS. NI BOP

CONTROLLER PAC DRIVE MAX4 PROFIVE T5 INTEL PII 266 MHZ 32 RAM FLASH MEMORY 32MB MORE THAN 99 AXES MASTER ENCODER 2 ANALOG INPUTS

SIMATIC S7-400; CPU 414-2 MODULE UNITÉ CENTRALE AVEC : 1 MO DE MÉMOIRE DE TRAVAIL; (0;5 MO DE CODE; 0;5 MO DE DONNÉES); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP

MODICON; PLC CPU;984 MODEL 685E 24 TO 230 V AC/24 TO 110 V DC; 2 A; MODBUS MODBUS + USER MEMORY 16K DATA MEMORY 10K

SLC 5/03 CPU PROCESSOR; 16K MEMORY; DH-485 & RS-232 COMMUNICATION PORTS

DIGIDRIVE SK3402 - 22KW - 30HP - 43A

SIMATIC S7-400; CPU 412-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE; 48 KB WORKING MEMORY

SINUMERIK 840/DE MATERIEL CNC NCU 572.5; 650 MHZ; 64 MO SANS LOGICIEL SYSTEME MEMOIRE: NC 3 MO; AP 128 KO PREVU POUR PROFIBUS DP.

SIMATIC S7-300; CPU 314C-2DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 96 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC DP; CPU 1510SP-1 PN POUR ET 200SP; UNITE CENTRALE AVEC MEMOIRE VIVE 100 KO POUR PROGRAMME ET 750 KO P. DONNEES; 1RE INTERFACE: PROFINET IRT AVEC COMMUT. 3 PORTS; 72 NS PERFORMANCE SUR BIT; SIMATIC MEMORY CARD NECESSAIRE; ADAPTATEUR DE BUS NECESSAIRE P. PORT 1 ET 2

CPU. TSX 57.45 V3 CON FIPIO INTEGR. ROHS VERSION TSXP57453A

1746 SLC SYSTEM; SLC 5/04 CONTROLLER; 32K MEMORY - SERIE C

UNITY PROCESSOR - 8 RACKS (12 SLOTS) / 16 RACKS. (4/6/8 SLOTS) - 930 MA; 5 V DC

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART - CALIBRE 250A

TSX MOMENTUM M1 ETHERNT WITH I/O BUS;1MEG FLASH & IEC

SIMATIC S7-300; CPU 314 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 48 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

MODICON QUANTUM - MODULE ADAPTATEUR CÔTÉ TÊTE RIO - 1 CONN. À UN SEUL CÂBLE

SIMATIC S5 CPU 095 - 16IX24VDC / 16O24VDC 0.5 - SIMATIC S5; S5-95U COMPACT UNIT

SINGLE-FORMAT PL7 PROCESSOR - 530 MA 5 V DC

CNC NUM AXIUM2 POWER P2

PS316 EBE 223.1 PROCESSOR MODULE

CARTE ACQUISITION CLAVIER POUR NUM760 REF 200093H26

CARTE PROCESSEUR V2-40KO POUR NUM750/760

PS316 EBE 223.1 PROCESSOR MODULE

SIMODRIVE 611 VORSCHUBMODUL 20/40 A

CPU

PC BOARD MAIN PROCESSOR CALCULATEUR

6SE6436-2BD34-5EA0

HCMC03MC-0B - MAESTRO MCO3MC COPROCESSOR

SIMATIC S5; CPU 946R F. S5-155H PLC

DRIVE - FREQUENCY INVERTER - POWER SUPPLY 200 TO 240V SINGLE PHASE

AS-C921-101 COMM PROCESSOR MODULE

SIMATIC C7-635 TOUCH; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU314C-2 DP AND TP170B; 24 DI; 16 DO; 5 AI; 2 AO

CARTE CPU GEFRAN POUR SOUFFLEUSE TA180.

TI330 MODULAR CPU IS CAPABLE OF CONTROLLING 176 I/O POINTS AND HAS 3.7K WORDS OF PROGRAM STORAGE. ARTICLES EQUIVALENTS330-37D3-330

SINUMERIK 880; BASIC VERSION 2 6FX1147-4BB00 NC /COM CPU 32 BIT; W/O COPROCESSOR.

SINUMERIK 840D/DE CNC-HARDWARE NCU 571.5B; 900 MHZ; 128 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB; PLC 128 KB PREPARED FOR PROFIBUS DP

CENTRAL PROCESSOR; 750KB; SRAM; 1.5MB; FLASHPROM; 24VDC

CGEE ALSTHOM C350/C370 C350/C370 CPU BOARD

FANUC SYSTEM 6B LEVEL UP MASTER PCB MBII MASTER BOARD

A16B-3200-0010 CARTE MAIN CPU FANUC 16-MB 16-TB

SYSMAC PROGRAMMABLE CONTROLLERS CPU21-E POWER SUPPLY 100-120 VAC/200-240 VAC

CPU NANO-B JETTER

CPU TOSHIBA EX100 REF EX10-MPU11A

FESTO SPC 2000 SUB-CONTROLLER FOR 3RD AND 4TH PNEUMATIC AXES

SIMOVERT P. 6SE12/13 COMPLETE OPERATOR PANEL OPP 470 103 9001.03 FOR 3.5 TO 200 KVA

SICOMP AMS-M223-A2 ETHERNET INTERFACE WITH 80186; 8 MHZ; 512 KBYTE DRAM; 4 HOLDERS FOR EPROM/SRAM; 2 V.24/V.28 OR V.11 INTERFACES; ETHERNET INTERFACE

CL200 CENTRAL PROCESSING UNIT ZE200M SYSTEM CLOCK; HIGH-SPEED COUNTERS; INTERRUPT INPUTS; MEMORYCARD

UNITÉ CENTRALE PLC; FX-24MR-ES/UL; MITSUBISHI; SÉRIE FX

SINUMERIK 840C/840CE 1 INTERFACE ACTIVE CP 315 SANS LOGICIEL SYSTEME

SIMATIC TI505 CENTRAL UNIT FOR TI505 PLC TI555 CPU; 1920 KB MEMORY

VARIATEURS À CONTRÔLE VECTORIEL DE FLUX - 1;5KW - 3;8A

CPU; HIGH SPEED CENTRAL PROCESSING UNIT GE FANUC SERIES ONE

PROCESSEUR CN V3

SIMATIC S5; CPU 944 CPU F. S5-115U PC RAM 96K BYTES WITH 2 PROGRAMMER PORTS

OMRON CPU CQM1H-CPU11

MICROMASTER 420 SANS FILTRE MONO-/TRIPH. 200-240 V +10/-10% 47-63 HZ COUPLE CONSTANT 0;37 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 0;37 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

6SE6440-2UC23-0CA1 - MICROMASTER 440 WITHOUT FILTER 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 3 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP

SIMATIC S7-400; CPU 412-1 CENTRAL PROCESSING UNIT WITH: 288 KB WORKING MEMORY; (144 KB CODE; 144 KB DATA); INTERFACE MPI/DP 12 MBIT/S

1762 MICROLOGIX 1200 SYSTEM; MICROLOGIX 1200; 120/240V AC POWER; (20) STANDARD 24V DC AND (4) FAST 24V DC DIGITAL INPUTS; (16) RELAY OUTPUTS - SERIE C

CPU MODULE COMES WITH CLOCK FUNCTIONALITY; A 7.2 K WORD CAPACITY; AND A MAXIMUM OF TWO EXPANSION I/O RACKS

PUPITRE NUM POUR FRAISEUSECODE NUM = 205201215

FANUC CONTROL BOARD A16B-2200-014

SIMATIC S7-400; CPU 416-3 PN/DP CENTRAL PROCESSING UNIT WITH: 16 MB WORKING MEMORY; (8 MB KB CODE; 8 MB DATA); INTERFACES: 1. IF MPI/DP 12 MBIT/S (X1); 2. IF ETHERNET/PROFINET (X5); 3. IF IF964-DP PLUGABLE (IF1)

PLC-5/40 CPU4 DH+ OR REMOTE I/O (ADAPTER OR SCAN)USER MEMORY WORDS; MAX 48 000 TOTAL I/O; MAX 2048 SERIE A

DRIVE 30 KW - UNI3404 VTC

QUADLOG CRITICAL CONTROL MODULE PLUS QLCCM24AAN CCM+ 4 MB REF 16418-41/3

GJR5250000R0151 CPU - 7 K FLASH EPROM; TWENTY 24 VDC INPUTSTWELVE 2A RELAY OUTPUTSPROGRAMMABLE RS 232 PORTRS 485 240 VAC POWER SUPPLY

SIMATIC S7-1500F; CPU 1516F-3 PN/DP; UNITÉ CENTRALE AVEC MÉMOIRE VIVE 1;5 MO POUR PROGRAMME ET 5 MO POUR DONNÉES; INTERFACE 1: PROFINET IRT AVEC COMMUT. 2 PORTS; INTERFACE 2: ETHERNET; INTERFACE 3: PROFIBUS; 10 NS PERFORMANCE SUR BIT; SIMATIC MEMORY CARD NÉCESSAIRE