SIMATIC S7-300 LEUKHARDT

SIMATIC S7-300; FM 354 SUBMODULE FOR POSITIONING WITH SERVOMOTORS

SIMATIC S7-300;INTERFACE MODULE IM 361 IN EXPANSION RACK FOR CONNECTING TO CENTRAL RACK (IM 360);24 V DC SUPPLY VOLTAGE

S7-300 CONNECTING CABLE FOR 64 CHANNEL MODULES; LENGTH: 5M 2 PIECES PER PACKAGING UNIT

SIMATIC S7-300/-400; MANUAL COMMUNICATION FOR S7-300/-400; FRENCH

SIMATIC S7-300/-400; MANUAL COMMUNICATION FOR S7-300/-400; ITALIAN

SIMATIC S7-300; MANUAL CONFIGURATION; CPU DATA; MODULE DATA; OPERATIONS LIST; PAPER VERSION; ITALIAN

SIMATIC NET; CP 343-1 COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S7-300 W. IND. ETHERNET USING TCP/IP AND UDP; S7 COMM.; FETCH/WRITE; SEND/RECEIVE; WITH AND W/O RFC 1006; DIAGN. EXPANS.; MULTICAST LOADABLE COMMUNICATION BLOCKS; SNMP DIAGNOSIS; INITIALIZATION TROUGH LAN; 10/100 MBIT; FOR LAN RJ45 CONNECTION ONLY!

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 8 DI; 120V/230V AC; 20 PIN

SIMATIC S7-300; FM352-5 WITH SINK OUT; HIGH SPEED BOOLEAN PROCESSOR; FOR HIGH-SPEED LOGIC OPERATION 12 DI; 8 DO; 1 ENCODER INTERF. FOR RS422 INCR./SSI ENCODER

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 8 DI; 120V/230V AC; 20 PIN

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE 2 AO; U/I; 11/12 BITS RESOL.; 20 PIN

SINAUT ST7; TIM 3V-IE ADVANCED COMMUNICATION MODULE FOR SIMATIC S7-300 WITH A RS232-INTERFACE FOR SINAUT COMMUNICATION VIA A CLASSIC WAN AND A RJ45 INTERFACE FOR SINAUT COMMUNICATION VIA AN IP-BASED NETWORK (WAN OR LAN)

SIMATIC S7-300; CPU 313C-2 PTP COMPACT CPU WITH MPI; 16 DI/16 DO; 3 FAST COUNTERS (30 KHZ); INTEGRATED INTERFACE RS485; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-300; CPU 315 CPU WITH INTEGRATED 24 V DC POWER SUPPLY; 48 KBYTES; 16KAW; 0.3MS/KAW; CLOCK; 2ND INTERFACE MASTER

SIMATIC S7-300; IQ-SENSE SM338 FOR S7-300 AND ET200M FOR CONNECTING UP TO 8 IQ-SENSE SENSORS; OPTICAL SENSORS AND ULTRASONIC SENSORS CAN BE CONNECTED

OUTPUT MODULE ANALOG 4POINT 12BIT

SIMATIC S7-300; CPU 315F-2DP FAILSAFE CPU WITH MPI INTERFACE INTEGRATED 24V DC POWER SUPPLY; 384 KB WORKING MEMORY; 40MM WIDE; 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD REQUIRED

SIMATIC M7-300; FM356-4 APPLICATION MODULE W. 80486DX2 AND 4MB RAM; 1 SER. INTERFACE; EXPANSION BUS

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 4 MBYTES

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED 16DO; RELAY CONTACTS; 1 X 20 PIN.

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 2 AI; 9/12/14 BITS RESOLUTION; U/I/THERMOCOUPLE/RESISTANCE; INTERRUPT; DIAGNOSTICS; 20 PIN

6ES7326-1BF01-0AB0

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16 DI; DC 24V; 20 PIN; PROCESS INTERRUPT; DIAGNOSTICS

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 128 KBYTES

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 64 KBYTES

SIMATIC S7-300; FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACTS; 40-PIN.

SIMATIC S7-300 CPU 319-3 PN/DP; CENTRAL PROCESSING UNIT WITH 2 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; 3. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

FRONT CONNECTOR WITH TWISTED RIBBON CABLE CONNECTION FOR 16 DIGITAL I/O MOD. OF THE S7-300; POWER SUPPLY VIA SCREW-TYPE TERMINALS

SIMATIC S7-300; CPU 314C-2 PTP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED INTERFACE RS485; INTEGRATED 24V DC POWER SUPPLY; 192 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-300; FUNCTION MODULE FM 357-2 (M80486 CPU) FOR POSITIONING AND PATH CONTROL OF STEPPER AND SERVO MOTORS (4 MEASURING CIRCUITS)

SIMATIC S7-300; DIGITAL OUTPUT SM 321; OPTICALLY ISOLATED; 16 DO; 120V AC; 0.5A; 20 PIN

SIMATIC S7-300; CPU 317T-2 DP; CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY 1024 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S 2. INTERFACE DP(DRIVE); INTEGRATED I/O FOR TECHNOLOGY FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY

SIMATIC S7-300; COUNTER MODULE FM 350-1 FOR S7-300; COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; COUNTER MODULE FM 350-1; FOR COUNTER FUNCTIONS UP TO 500 KHZ

SIMATIC S7-300; CONTROL MODULE FM 355 S; 4 CHANNELS; STEP AND PULSE; 4 AI + 8 DI + 8 DO INCL. MULTI-LANG CONFIG. PACK.; MANUAL AND GETTING STARTED (GER/EN/FR/IT) ON CD-ROM

6ES7392-1JA00-0AA0 -

SIMATIC S7-300; CPU 312C COMPACT CPU WITH MPI; 10 DI/6 DO; 2 FAST COUNTERS (10 KHZ); INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-300; CPU 314 FOR EXPANDED TEMPERATURE RANGE INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 315-DP FOR EXPANDED TEMPERATURE RANGE INTEGRATED 24 V DC POWER SUPPLY 64 KBYTE WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

SIMATIC S7/PCS7; SM 321 DIGITAL INPUT MODULE; 16 DI; 24V DC; 1 X 40 PIN; CAPABLE OF DIAGNOSTICS; FOR CONTACTS (CONNECTED/ UNCONNECTED); NAMUR SENSOR; 3/4-WIRE-BERO; WITH FLUTTER MONITORING; PULSE LENGTHENING; WIRE BREAK DETECTION; IM153-2 INTERFACE MOD. REQUIRED

SIMATIC S7-300; CABLE CELL LK 393 FOR EX (I) MODULES L+ AND M INTRINSICALLY SAFE CONNECTIONS TO TERMINALS 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300/-400; MANUAL COMMUNICATION FOR S7-300/-400; SPANISH

SIMATIC S7-300; MANUAL CONFIGURATION; CPU DATA; MODULE DATA; OPERATIONS LIST; PAPER VERSION; GERMAN

SIMATIC S7/PCS7; SM 322 DIGITAL OUTPUT MODULE; 16 DO; DC 24 V / 0;5A; CAPABLE OF DIAGNOSTICS; WIRE BREAK DETECTION TO 0 AND 1 SIGNAL; 1 X 40-PIN; INTERFACE MODULE IM 153-2 NECESSARY

SIMATIC S7;SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION; 4 AO; 15 BIT RESOLUTION; 0-10V; 1-5V; +/-10V; +/-20MA; 0/4 - 20MA; 20 PIN; FIT FOR ISOCHRONE MODE

FAST ANALOG HYBRID MODULE FOR SIMATIC S7-300 MANUAL; CURRENT EDITION GERMAN

SIMATIC S7-300; MANUAL F. POSITIONING MODULE FM354 GERMAN

SIMATIC S7-300; TEMPERATURE CONTROL MODULE FM 355-2 C; 4 CHANNELS; CONTIN. 4 AI + 8 DI + 4 AO INCL. MULTI-LANG CONFIG. PACK.; MANUAL AND GETTING STARTED (GER/EN/IT) ON CD-ROM

FM 357-2 MANUAL; GERMAN CURRENT EDITION

SIMATIC S7-300; RAIL L=885MM FOR INSTALLATION FROM ET200ISP IN 900MM CABINET

SIMATIC S7-300; INSTALLATION ADAPTER FOR SNAPPING THE PS307 ONTO THE 35 MM DIN RAIL

S7-300; TERMINAL BLOCK WITH SPRING-LOAD TERMINALS FOR 64 CHANNEL MODULES OF S7-300; 2 PIECES PER PACKAGING UNIT.

SIMATIC S7-300; 10 DIN A4 LABELLING SHEETS COLOR: LIGHT-BEIGE; 10 LABELLING STRIPS/SHEETS FOR SIGNAL MODULES (16 CHANNELS); MATERIAL: MEMBRANE; PREPERFO- RATED; FOR PRINTING ON A LASER PRINTER; 10 SHEETS PER PACKAGING UNIT

SIMATIC S7-300; 10 DIN A4 LABELLING SHEETS COLOR: YELLOW; 10 LABELLING STRIPS/SHEETS FOR SIGNAL MODULES (32 CHANNELS); MATERIAL: MEMBRANE; PREPERFO- RATED; FOR PRINTING ON A LASER PRINTER; 10 SHEETS PER PACKAGING UNIT

SIMATIC S7-300;LABELLING STRIPS FOR F - MODULES (SPARE PART) 10 PIECES PER PACKAGING UNIT

SIMATIC M7-300; EXM378-3 EXPANSION MODULE FOR THE USE OF 3 IF MODULES

6ES7317-2FK14-0AB0 - SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 1.5 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

SIMATIC M7-300; MSM378 MASS STORAGE MODULE WITH 3.5" FLOPPY DISK DRIVE AND 500 MB HARD DISK

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 16 DI; 24 V DC; 20 PIN

SIMATIC S7-300; DIGITAL MODULE SM 323; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE 8 DI/8 DO; 24V DC; 0.5A; TOTAL CURRENT 2 A; 20 PIN

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO; 24V DC; 2A; 20 PIN

SIMATIC S7-300;INTERFACE MODULE IM 360 IN CENTRAL RACK FOR CONNECTING MAX. 3 EXPANSION RACKS

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 16 DI; 24V DC; 20 PIN; PROCESS INTERRUPT; DIAGNOSTICS

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 2 AO; U/I; 11/12 BITS RESOL.; 20 PI

CARTE DE COUPLAGE POUR LES AUTOMATES SIEMENS SIMATIC S7 300 IBS S7 300 DSC/I-T

SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 OR HIGHER

SINAUT ST7; TIM 32 D TELECONTROL UNIT FOR SIMATIC S7-300 WITH INT. MODEM MD2 FOR DEDICATED LINES INCL. DCF 77 RECEIVER MODULE

SINAUT ST7; TIM 4V TELECONTROL MODULE FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE

SINAUT ST7; TIM 44 D TELECONTROL UNIT FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE WITH INT. MODEM MD4 FOR EURO-ISDN INCL. DCF 77 RECEIVER MODULE

SINAUT ST7; TIM 4V D BN TELECONTROL MODULE FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE INCL. DCF 77 RECEIVER MODULE FOR APPLICATIONS WITH SPECIAL DRIVERS

SIPLUS S7-300 SM331 - 20-POLE -25 ... +70 DGR C WITH CONFORMAL COATING BASED ON 6ES7331-7KB02-0AB0 . ANALOG INPUT GALVANICALLY ISOLATED 2 AI; AUFL. 9/12/14 BIT; U/I/THERMOEL./RESISTOR; ALARM; DIAGNOSTICS; 1 X 20-POLE; REMOVE/INSERT W. ACT. BACKPLANE

SIPLUS S7-300 FM350-2 FOR MEDIAL STRESS BASED ON 6ES7350-2AH00-0AE0

SIMATIC S7-300 TRAINING UNIT WITH CPU 315-2DP; 128 KB; COMPLETE INCL. SIMULATOR

MOBY-SP ASM 470 INTERFACE MODULE FOR SIMATIC S7-300

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16 DI; 120V AC; 20 PIN

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH 20MA INTERFACE (TTY) INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH SLOT F. MC 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY

SIMATIC S7-300; RAIL L=2000MM

SIMATIC NET; CP 343-1 PN PROCESSEUR DE COMMUNICATION POUR LA CONNEXION DE SIMATIC S7-300 W. IND. ETHERNET W. PROFINET FUNC. TCP / IP; S7 COMM.; FETCH / WRITE ENVOYER / RECEVOIR; AVEC ET SANS RFC 10/100 MBIT

SIMATIC S7-300 CPU 317-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO (RELAY OUTPUTS); 40 PIN; 24V DC; 120 - 230V AC; 5A WITH INTEGR. SNUBBER F. IND. LOADS

SIMATIC S7-300; CPU 313 W. INTEGR. 24V DC POWER SUPPLY 12 KBYTE WORKING MEMORY APPROX. 4 KAW; 0.6 MS/KAW

SIMATIC S7; ANALOG INPUT/OUTPUT SM 334; NON-ISOLATED; 4 AI/2 AO; 1 X 20 PIN; REMOVE AND INSERT WITH BACKPLAIN BUS

SIMATIC S7; MICRO MEMORY CARD POUR S7-300/C7/ET 200; 3;3 V NFLASH; 128 KO

SIMATIC S7-300; FRONT DOOR EXTENDED FOR 32-CHANNELSIGNAL MODULES; ALLOWS CONNECTION OF 1.3 QMM OR 16 AWG WIRE SIZE ON A 32 POINT MODULE 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300;SIMULATOR MODULE SM 374; FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8 INPUTS AND 8 OUTPUTS; 16 SWITCHES; 16 LED.

SIMATIC S7; MICRO MEMORY CARD FOR S7-300/C7/ET 200; 3.3 V NFLASH; 8 MB

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 8 AO; U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS; 40 PIN; REMOVE/INSERT W. ACTIVE; BACKPLANE BUS

SIWAREX U WEIGHING ELECTRONICS (SINGLE CHANNEL VERSION) * FOR CONNNECTING ONE SCALE * FOR SIMATIC S7-300 AND ET200M * RS232 INTERFACE FOR CONNECT. OF A PC * TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 32DI; 24V DC (1 X 32DI); 40 PIN