LISTE DER PRODUKTE NACH HERSTELLER SIEMENS

KSP-A362-BB-HS50 - PLC SICOMP

ON870 PRINT - DIGITALREGLER

KABLE SIEMENS SINUMERIK 2.5METER

6FG4041-0AN20 MODULE

SIROTEC

SIROTEC RACK

SIROTEC ACR 20 HARDWARE ERSATZTEILE PROGRMMIERHANDGERAET KUKA-BESCHRIFTUNG

SINUMERIK MODULE

SIGNAL CABLE; PREASSEMBLED; (VOLTAGE SIGNAL ENCODER) 3X2X0.14+4X0.14+2X0.5+4X0.23 C UL/CSA; DESINA MOTION CONNECT 500 DMAX = 9.9 MM; TYPE: 6FX5002-2CA31 LENGTH (M) = 0 + 70 + 0 + 0

SIGNAL CABLE; PREASSEMBLED ( RESOLVER IN THE MOTOR ) 3X2X0.14 + 4X0.14 + 2X0.5 C UL/CSA; DESINA; MOTION CONNECT 500; DMAX = 9.3 MM; LENGTH (M)= TYPE: 6FX5002-2CF02 LENGTH (M) = 0 + 0 + 8 + 0

POWER CABLE; PREASSEMBLED TYPE: 6FX5002-5DG01 4X1.5+(2X1.5)C; CONN. SIZE 1 (SINAMICS AC DRIVE) UL/CSA; DESINA MOTION-CONNECT 500 DMAX=10;8 MM; 0 + 10 + 0 + 0

USB/PS2 CABINET KEYBOARD GER 19" WITH TOUCHPAD; PS/2 FOR DEVICES WITH SUITABLE CONNECTOR ADDITIONAL INFORMATION: SEE TECHNICAL DATA

SENSOR CABLE FOR CONNECT. OF SENSOR HEAD SIMATIC VS100; LENGTH 2.5 M; CAN BE PLUGGED ON BOTH SIDES; CAN BE FITTED AS TRAILING CABLE (THIS PRODUCT IS PART OF THE SIMATIC VS110 COMPLETE PACKAGE)

SIMOVERT PM

SIWAREX IS SAFETY BARRIER FOR INTRINSIC SAFE CONNECTION OF LOAD CELLS; LOW-CURRENT FITS TO DIN-RAIL WITH ATEX APPROVAL: (EEX IB) II C AS ASSOCIATED ELECTRICAL EQUIPMENT METROLOGICAL APPROVAL AVAILABLE SOON

TELEPERM MODULE

7VR52ZFE MODULE

TGNS 5-230/24 POWER SUPPLY 24VDC 5A

SIMATIC PG; SPARE PART;DISPLAY FRONT FOR FIELD PG SIMATIC PG

MODULE

RFID BLOC DE RACCORDEMENT POUR RF170C POUR 2 LECTEURS VIA M12 CONNECTEURS

MOBY E MOBILE DATA MEMORY MDS E623 PILL; 752 BYTES EEPROM; FOR FLUSH MOUNTING IN METAL; IP67; -25 ... +85 °C; D=10X 4.5 MM ACCORDING TO DIN 69873.

MOBY U WRITE/READ UNIT SLG U92 WITH RS 232; INTEGRATED ANTENNA; FOR EUROPE; IP 65; -25 TO +70 DEGR./C; 290 X 135 X 42 MM; MAX. DISTANCE: 3 M; FILE HANDLER AND DIRECT WRITE/READ FUNCT.; MULTI-IDENT. CAPABILITY: UP TO 12 MDS

SIMATIC RF300 READER RF380R RS422/232-INTERFACE (3964R) IP 67; -10 UP TO 60 DGR/C; 160 X 80 X 40 MM WITH INTEGRATED ANTENNA

SINAUT ST1 TIM EPROM

SINAUT PPI MODEM CABLE FOR CONNECTING GSM MODEM MD720-3 TO SERIAL PPI INTERFACE OF S7-200

6SF5910-0A BOARD

SINAMICS G REPLACEMENT CONTROL INTERFACE BOARD FOR 3AC 660-690 V; 50/60HZ; 100 A POWER MODULE

SIMATIC PC SPARE PART

KEYBOARD

SIMATIC PANEL PC 870

SIMATIC PG; SPARE PART KEYBOARD MODULE FRENCH FOR FIELD PG M/M2

SIMATIC PG; SPARE PART PLASTIC PARTS FOR DISPLAY FOR FIELD PG M/M2

DOUBLE MOTOR MODULE CARD

INTERFACE MODULE 2

SIGNAL CONVERTER WITH INPUT FOR 0 TO 20 MA OR 4 TO 20 MA

EURO OPEL MMI

SIMATIC S5; PG SPARE PART FDE MODULE FOR PG 685

AMS-M349

SMP-E160-A1 MEMORY MODULE

SICOMP BORD

POWER INTERFACE

KSP-MEM365

L2-DP BUSANSCHLUSS FUR OPX

SIMATIC IPC 477D; 22" TOUCH DISPLAY; 4 USB (BACK)+1 USB

PCB CARD.MS100 DIAG BOARD FOR OPERATOR PANEL

SIEMENS LANDIS & STAEFA OPTION CARD

WL1100P-2-E MODULE

MINIATURE CIRCUIT BREAKER 240 V 14KA; 1-POLE; C; 10A; D=70 MM ACCORDING TO UL 489; EQUAL POLARITY

Z=K42 PERMANENT MAGNET MOTOR ; NOMINAL VOLTAGE [V]: 375 STAR ; STALL CURRENT [A]: 4.3/5.3 ; MAX. SPEED [MIN-1]: 4800 ; NOMINAL SPEED [MIN-1]

THERMAL RESISTANCE PT100

SIEMENS AXIOM ARTIS CONTROL CONSOLE

SIMATIC PG; SPARE PART SLIM DVD-WRITER F

SIMATIC NET; TF NET1413/ WINDOWS 95 F. IND. ETHER./V3.00 CONSISTS OF: CP 1413 AND TF-1413/WINDOWS 95 GERMAN/ENGLISH DOCUMENTATION

SINUMERIK 810D CCU2

6FC5610-0BA10-0AA0 SINUMERIK 802D OPERATOR PANEL CNC; -CNC (4 AXES; 1 SPINDLE); -PLC; -HMI (10.4" MONOCHROME); -COM (PROFIBUS; RS 232)

SIMATIC S5;405 DIGIT.INP.MODULE FLOATING 8 INPUTS AC 48V

AS 230/AS 231 CENTRAL PROCESSOR RAM/EPROM MEMORY CONTROL MODULE VERSION CID

SINAMICS V20 1AC200-240V -10/+10% 47-63HZ RATED POWER 2;2 WITH 150% OVERLOAD FOR 60SEC UNFILTERED I/O-INTERFACE: 4DI; 2DO;2AI;1AO FIELDBUS: USS/ MODBUS RTU WITH INBUILT BOP PROTECTION: IP20/ UL OPEN TYPE SIZE:FSC 184X182X169(HXWXD)

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITHOUT BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 160KW FOR 160% 3S;136% 57S;100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 200KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP 0 TO +40 DEG C 1533 X 326 X 545 (HXWXD); FSGX PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

SINAMICS G120 POWER MODULE PM240 WITH BUILT IN CL. A FILTER WITH BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 75KW FOR 200% 3S;150% 57S;100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 90KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP -10 TO +40 DEG C 934 X 350 X 316 (HXWXD); FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP

SIMATIC DP; ELECTRONIC MODULE FOR ET200S; 2 AO U HIGH SPEED; 15 MM WIDTH; +/-10V; +/-5V; 1.. 5V; 16BIT; CYCLE TIME: 0.1 MS WITH LED SF (GROUP FAULT)

MODULE FUM 230 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE 0/4 TO 20 MA -16 INPUTS 0/4 TO 20 MA IN 2 OR 4 WIRE CIRCUIT -TRANSDUCER SUPPLY WITH 24 V DC -4 LIMIT VALUES PER CHANNEL -SIGNAL CORRECTION POSSIBLE -MONITORING OF THE TRANSMITTER SUPPLY; MEASUREMENT RANGE OVERSHOOT AND UNDERSHOOT AND WIRE BREAK -SUITABLE FOR REDUNDANT USE

FUM 323 ANALOG TRANSMITTER SIGNAL CONDITIONING MODULE FOR PT100 AND THERMOCOUPLE; TRANSMITTER SIGNAL CONDITIONING -14 PT 100 RESISTANCE THERMOMETERS WITH FOUR WIRES POWER SOURCE; NO-LOAD AND OVERLOAD PROOF OR -28 THERMOCOUPLES OPTIONALLY WITH FIXED O

SINUMERIK 840C/840CE INTERFACE 16 BIT ANSCHLUSS SI.

SIMODRIVE 611 CAPACITOR MODULE 4.1 MF FOR CONNECTION TO DC LINK FOR POWER BACK-UP W X H X D (MM) 100 X 480 X 211

SIMODRIVE 611-D CLOSED-LOOP CONTR. PLUG-IN UNIT 2-AXES; HYDRAULIC LOSED-LOOP CONTROL WITH DIR. MEASURING SYSTEM AND SIGNAL

SIMODRIVE 611 FILTER PACKAGE 55 KW; CONTAINS: HF COMMUTATING REACTOR AND MAINS FILTER

SIMODRIVE 611 POWER MODULE; 2-AXIS; EXTERNAL COOLING; MOTOR RATED CURRENT: FEED = 18 A MAIN SPINDEL = 24 A

SIMODRIVE 611-A; CONVERSION KIT 611 (W = 150 MM) TO FEED DRIVE 611-A (W= 100 MM)

SIMODRIVE 611-A MAIN SPINDLE MODULE; 30/40 A; BASIC VERSION

SIMODRIVE 611 INFEED/REGENERATIVE FEEDBACK MODULE; 36/47 KW REGULATED; EXTERNAL COOLING; MAINS PROTECTION WITH NC CONTACT

SIMATIC FIELD PG

SIMATIC FIELD PG; PENTIUM III 1 GHZ; 256 KB 2ND LEVEL CACHE; STEP 7; STEP 5; STEP 7 MICROWIN ; 128 MBYTE RAM (1X128 MB SDRAM); 20 GBYTE HDD EIDE; DVD / CD ROM DRIVE & 1.44 MB FLOPPY DISK DRIVE; WINDOWS 2000 MUI GEFSI; POWER CABLE FOR: GER;FR;NL;SP;BEL;AUSTRIA;SWD; FIN STEP-SOFTWARE INST. 12/2002

SIMODRIVE 611-A FEED MODULE; 2 AXES; 2 X 4/8 A; STANDARD INTERFACE

SIMODRIVE VPM 120; VOLTAGE PROTECTION MODULE; 120 A METRIC THREAD

SIMODRIVE 611 HF REACTOR; 16/21 KW FOR SINUSOIDAL AND BLOCK-TYPE CURRENT

SIMODRIVE 611-A FEED MODULE; 80/160 A; ENHANCED INTERFACE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE2DUO 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; 4 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; 50 GB SOLID STATE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 4 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 2048 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMODRIVE 611 FILTER PACKAGE 16 KW; CONTAINS: HF COMMUTATING REACTOR AND MAINS FILTER

SPARE PART FOR HMI IPC477C 19" TOUCH DISPLAY; 1280X 1024; STANDARD FRONT W. USB INTERFACE INTEL CORE 2 DUO 1.2 GHZ; 2 GB SD-RAM (DDR3); 2X ETHERNET 1 GBIT/S; 4XUSB 2.0; 500 MA; 1X RS232 (COM1); POWER SUPPLY 24 V DC; 2 CF SLOTS; WITHOUT MASS STORAGE

SIMODRIVE 611-A; CONVERSION KIT 611 (W = 100 MM) TO FEED DRIVE 611-A (W= 50 MM)

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 8 GB WINDOWS EMBEDDED STANDARD 7 PRE-INSTALLED; (ONLY POSSIBLE WITH CF OR SSD) WITHOUT SIMATIC SOFTWARE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT WITH 2 GB CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 512 PT; (INCL. ARCHIVES AND RECIPES); WIN AC RTX

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 12" TOUCH DISPLAY; 800X 600; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 2 GB -RAM; DDR3; 2ND CF SLOT WITH 4 GB CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WITHOUT SIMATIC SOFTWARE