LISTE DER PRODUKTE NACH HERSTELLER SIEMENS

SIMATIC S5 465 ANALOG INPUT MODULE NON-FLOATING; COMPACT VERSION U 16 INPUTS MEASURING RANGE MODULE REQUIRED

SIMOREG DC MASTER CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 460V; 175A CONTROLLABLE FIELD RECTIFIER D480/210 MREQ-GEG6V62 OUTPUT: DC 480V; 210A OUTPUT US-RATING:DC500V; 140A FIELD-INP. 460V;-

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER CHASSIS UNIT; IP00 510-650V DC; 92 A NOM. POWER RATINGS: 45KW DOCUMENTATION ON CD

PB FC M12 PLUG PRO CONNECT. ENFICH. M12 AV. BOIT.METALL.ROBUSTE ET CONNECTIQUE FC;AV. SORTIE DE CABLE AXIAL POUR ET200PRO; CONN. MALE; (CODAGE B) UNITE 5 PIECES

CONNECTEUR DE TERMINAISON M12 POUR ET 200 AVEC COMBINAISON DE RÉSISTANCE DE TERMINAISON INTÉGRÉE POUR PB; BLOC ISOLANT MÂLE; COLISAGE = 5.

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO (RELAY OUTPUTS); 20 PIN; 24V DC; 2A OR 230V AC; 2A

SIMATIC S7-1200; ANALOG INPUT; SM 1231 RTD; 4 X AI RTD MODULE

SIRIUS SOFT STARTER; SIZE S2; 38 A; 18.5 KW / 400 V; AC 200...460 V; UC 24 V; SCREW CONNECTION

COMMUNICATIONS PROCESSOR CP5430 SINEC L2 INTERFACE FOR CONNECT. SIMATIC S5 PROGR. CONTROLLERS 115U; 135U; 155U HARDWARE CP5430 (A1) ATTENTION: CONFIGURATION ONLY WITH SYSTEM SOFTWARE COM5430 TF (6GK1745-1AA0....)

SIMATIC S5 375 MEMORY SUBMODULE RAM; 16 KBYTES

CÂBLE DE LIAISON PC/AUTOMATE S7-200/300

SIMADYN D T400 WITH ANGULAR SYNCHRONOUS CONTROLLER INCL. SMALL DOCUMENTATION GERMAN/ENGLISH WITHOUT T400 ANGULAR SYNCHRONOUS CONTROL USER MANUAL

SINUMERIK 840D NCU SYSTEM SOFTWARE 12 AXES ON PC CARD; STANDARD SW VERS. 4.4; SINGLE LICENSE

PROTECTION MOTEURS THERMISTANCE APPAREIL DEVALUATION STANDARD AUTOM.; 1 NO + 1 NF; AC/DC 24 V BORNES A VIS

SICAM RTU COMMAND OUTPUT CO32 32 1-WAY OUTP. OR 16 2-WAY OUTP TIME CONTROLLED OUTPUT OF SINGLE COMMANDS DOUBLE COMMANDS COMMAND OUTPUT FOR: 32 1-WAY OUTPUT;32 1;5-WAY OUTP EXTERNAL RELEASE 16 2-WAY OUTPUTS SWITCH. CURR. CHECK WITH CR MOD TIME-INDEPENDENT COMMAND OUTPUT INTERNAL CHECKS SWITCHING CAPACITY;OHMIC LOADS 24V: TO 4;0A/48V: TO 1;3A 60V: TO 0;9A/125V: TO 0;4A

SIMATIC S7; MEMORY CARD FOR S7-400; LONG VERSION; 5V FLASH-EPROM; 16 MBYTES

MICROMASTER 440 AVEC FILTRE CLASSE A INTEGRE 1AC 200-240 V +10/-10% 47-63 HZ MOMENT CONSTANT 1.5 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 1.5 KW 202 X 149 X 172 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMATIC S7-1200; DIGITAL I/O SM 1223; 16DI / 16DO; 16DI DC 24 V; SINK/SOURCE; 16DO; TRANSISTOR 0.5A

SINAMICS ADAPT. ALIM.CIRC.INT. 0;5-10MM

FRONT CONN. MODULE W. TWISTED RIBBON CABLE CONNECTION FOR DIGITAL 32 I/O MODULE OF THE S7-300; POWER SUPPLY VIA SCREW TERMINALS

POWER SUPPLY FOR SICAM SYSTEM INPUT: 120/230 V AC; 110/220 V DC OUTPUT: 5 V DC/20 A; 24 V/1 A

SICAM RTU DIGITAL DI32 DIGITAL INPUT WITH: 32 BINARY PROCESS INPUTS 4 GROUPS OF 8 INPUTS REAL TIME ACQUISITION RES 1 MS CONFIGURABLE INPUT FILTER HW FILTER AND SW FILTER CYCLIC ACQUISITION OF STATES SPONTANEOUS ACQUISIT. OF EVENTS EVENT BUFFER FOR 200 EVENTS CONDITIONING BY BYTE FOR SINGLE INDICATIONS FLEETING INDICATIONS DOUBLE INDICATIONS COUNTING PULSES; BIT PATTERN TRANSFORMER STATE INDICATIONS INPUT VOLTAGE RANGES: UE 24 - 60V DC

CUA32 CONTROL UNIT ADAPTER FOR PM340/PM240-2 POWER MODULES WITH INTERFACE FOR INCREMENTAL ENCODER HTL/TTL

SIMATIC ET 200SP; MODULE D'ENTRÉES TOR; ENTRÉES TOR 8X 24V CC; TYPE D'ENTRÉE 2 (CEI 61131); ENTRÉE SINK (PNP; LOGIQUE P); COLISAGE: 1 UNITÉ; CONVIENT POUR TYPE DE BU A0; CODE DE COULEUR CC01; RETARD D'ENTRÉE 0;05..20MS; DIAGNOSTIC DE MODULE POUR : TENSION D'ALIMENTATION

SIPLUS S7-1200 SM1223 8DI/8DQ/R -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7223-1PH32-0XB0 . DIGITAL I/O 8DI / 8DQ; 8DI DC 24 V; SINK/SOURCE; 8DQ; RELAY 2A

SINAMICS G110 - CPM110 AC-DRIVE; WITHOUT FILTER 1AC200-240V 10/-10% 47-63HZ ANALOG INPUT CT: 1.5KW; VT: 1.5KW CT-OVERLOAD: 150% 60S 160 X 140 X 142 (HXWXD) PROTECTION IP20 AMBIENT TEMP -10 TO 40 DEG C WITHOUT BOP WITHOUT RS485-INTERFACE

SIMOREG CONTROL BOARD

SIMATIC S7; DIGITAL OUTPUT SM 326; DO 8 X DC 24V/2A PM FAILSAFE DIGITAL OUTPUTS P-M SWITCHING UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); 1 X 40 PIN

FRONT CONNECTOR FOR S7-300 40-POLE (6ES7392-1AM00-0AA0); WITH 40 SINGLE CORES 0.5 MM2; H05V-K SINGLE CORES; SCREW-TYPE VERSION; PACKING UNIT= 1 PCS; L = 2.5 M

SITOP UPS500S SERVICE-FREE UNINTERRUPTIBLE POWER SUPPLY WITH USB-INTERFACE BASIC UNIT 2.5 KWS INPUT: 24 V DC OUTPUT: 24 V/15 A DC DEGREE OF PROTECTION IP20

SIMATIC S7-1500; CPU 1517-3 PN/DP; CENTRAL PROCESSING UNIT WITH WORKING MEMORY 2 MB FOR PROGRAM AND 8 MB FOR DATA; 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH; 2. INTERFACE: PROFINET RT; 3. INTERFACE: PROFIBUS; 2 NS BIT-PERFORMANCE; SIMATIC MEMORY CARD NECESSARY

SIMATIC S7-400; CPU 416-2 DP CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE INTEGR. PROFIBUS DP INTERFACE 1.6 MB WORKING MEMORY

SIMATIC S7-400; CP 441-1 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 1 CHANNEL

SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M

SIMATIC S7-1200; DIGITAL INPUT SM 1221; 16 DI; 24VDC; SINK/SOURCE INPUT

SIMATIC BOX PC 620; AGP GRAPHICS ONBOARD; 8/16/32 MB CONFIGURABLE; 10/100 MBIT/S ETHERNET RJ45; PC CARD (PCMCIA TYPE 3); WATCHDOG; TEMP. MONITORING: 2 X USB; 1 PCI; 1 ISA/PCI FREE PROCESSOR: CELERON 1.2 GHZ; 256 KB SLC; 40 GB HDD EIDE & CD-R/RW/DVD (COMBO); 256 MBYTE RAM SDRAM-133 FLOPPY DRIVE; 1.44 MB; 3.5"; 24 V DC; 85 A INDUSTRY POWER SUPPLY; WINDOWS 2000 PROF. MULTILANG. SP4; (EN;GER;FR;IT;SP); WITHOUT EXPANSION 2

SIMATIC ET 200SP; BASE-UNIT BU20-P6+A2+4D; TYPE BU C0; BORNES PUSH-IN; AVEC 2 BORNES AUX; NOUVEAU GROUPE DE CHARGE; LXH: 20MM X 117MM

SIMATIC PC COMPACTFLASH DIAG; 8GB; INDUSTRIAL GRADE

MICROMASTER 420 A FILTRE INCORPORE CLASSE A TRIPH. 380-480 V +10/-10 % 47-63 HZ COUPLE CONSTANT 2;2 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 2;2 KW 202 X 149 X 172 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

SINAMICS CABINET BUSHING FOR DRIVE-CLIQ-CABLE PROTECTION IP54

SIMATIC MP 377 12" KEY MULTIPANEL; WINDOWS CE 5.0 12" COLOR-TFT-DISPLAY 12 MB USER MEMORY CONFIGURABLE FROM WINCC FLEXIBLE 2007 NEW KEY ALUMINIUM FRONT WITH UNIFORM CLAMPS

OPERATOR PANEL OP27 STN MONOCHROME LC DISPLAY.

SIMATIC PC; PCE RECHANGE; ALIMENTATION; TYPE INDUSTRIE; DC 24V /150W; REV. H3; CV5/4; IPC627B/C;; IPC827B/C; HMI IPC677B/C;; HMI IPC577B; HMI IPC577C

SIMATIC NET; CP 343-1 ADVANCED COMMUNICATION PROCESSOR FOR CONNECTING SIMATIC S7-300 TO IND. ETHERNET VIA PROFINET-IO CONTROLLER; PROFINET CBA;ISO; TCP/IP AND UDP; S7-KOMM.; FETCH/WRITE; SEND/RECEIVE; WITH AND W/O RFC1006; HTTP W JAVA; MULTICAST; LOA

SINAMICS S120 DOUBLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V; 5A/5A FRAME SIZE: BOOKSIZE D-TYPE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

SIMATIC S5; IP 244 TEMP.CONTROL MODULE

SIMOVERT MASTERDRIVES RECTIFIER COMPACT UNIT/IP20 3 380-480V AC; 50/60HZ 41A

SINAMICS DCM DC CONVERTER FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 13A CONTROLLABLE FIELD RECTIFIER D420/15 MREQ-GEG6V62 OUTPUT: DC 420V; 15A; BASE DRIVE FOR ADDITIONAL OPTIONS PLEASE CONTACT OUR SALES STAFF!

PC MOTOR DRIVE CONTROL BOARD

SINAMICS DCM DC CONVERTER FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 1328A CONTROLLABLE FIELD RECTIFIER D420/1600 MREQ-GEGF4V62 OUTPUT: DC 420V; 1600A G00=ADVANCED-CUD LEFT G20=CBE20 PROFINET-MODUL LEFT S01=MEMORY CARD LEFT OPTION Z=

SINAMICS DCM DC CONVERTER FOR 4-QUADRANT DRIVES CIRCUIT (B6) A (B6) C INPUT: 400V 3AC; 104A CONTROLLABLE: ...

SINAMICS DCM DC CONVERTER FOR TWO-QUADRANT DRIVES CONNECTION B6C INPUT: 3-PHASE AC 400V; 174A CONTROLLABLE FIELD RECTIFIER D485/210 MRE-GEEF6S22 OUTPUT: DC 485V; 210A; BASE DRIVE FOR ADDITIONAL OPTIONS PLEASE CONTACT OUR SALES STAFF!

SINAMICS DCM CONVERTISSEUR CC POUR ENTRAÎNEMENTS 2 CADRANS CIRCUIT B6C ENTRÉE: 3AC 400V; 498A COMMANDABLE: REDRESSEUR D'EXCITATION D485/600 MRE-GEEF6S22 SORTIE: 485V CC; 600A

SIMATIC DP; TERMINAL MODULE TM-P15C22-01 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2 X 2 TERMINAL CONNECTIONS W/O TERMINAL LEAD TO AUX1; AUX1 IN LINE

NE PAS UTILISER CETTE REFERENCE QUI REPRESENTE LA REF DE LA DOC DU PRODUIT - LA VRAI REF EST 3RT1024*******

SIMATIC S7-400; PS 405 POWER SUPPLY; WIDE RANGE 10A; 24/48/60V DC; 5V/10A DC

PM36/C1R COLOR MONITOR DEGREE OF PROTECTION IP65 IMAGE REFRESH RATE 45-120 HZ; LINE FREQUENCY 15.5-36 KHZ; RACK MOUNTING: RACK DEGREE OF PROTECTION IP65 AT THE FRONT

PM36/C1 COLOR MONITOR; PROTECTION IP30;W. SCREEN FRAME REFRESH FREQUENCY 45-120 HZ; LINE FREQUENCY 15.5-36 KHZ; DESK-TOP MODEL; CUBIC HOUSING; WITH SCREEN FRAME

PM51/2C2 COLOR MONITOR 115/230 AC V; REFRESH FREQUENCY 45-120 HZ; LINE FREQUENCY 15-38 KHZ; RACK MOUNTING: CHASSIS; DEGREE OF PROTECTION IP54 W.CORRESPONDING SCREEN FRAME STANDARD VERSION

SIMATIC S7-1500; ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION; ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4; DIAGNOSIS; SUBSTITUTE VALUE INCL. INFEED ELEMENT; SHIELD CLAMP AND SHIELD TERMINAL; (REFURBISHED: CONNECTORS 6ES7592-1AM00-0XB0 + 6

SIEMENS SIPLUS ET 200 S F-DO 24 V 6AG1138-4FB04-2AB0 IP20 ENTRÉE/SORTIE-MODULES

MICROMASTER 4 BRAKING RESISTOR 380-480 V 56R 13000 W PK 650 W CONT 285 X 185 X 150 MM H X W X D IP20

SIMATIC S7-400; CPU 416F-2; CENTRAL PROCESSING UNIT WITH: 5.6 MB WORKING MEMORY; (2.8 MB CODE; 2.8 MB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP APPLICABLE W. SOFTWARE PACKAGE DISTRIBUTED SAFETY >= V5.2+SP2

SIMODRIVE 611-A PLUG-IN CLOSED-LOOP CONTROL UNIT; 1-AXIS; FOR FEED DRIVES WITH 1FT5; STANDARD INTERFACE

SIMATIC S7-1200; ENTRÉE TOR SM 1226; ENTRÉE TOR DE SÉCURITÉ 16X 24V CC; PROFISAFE; LARGEUR DE CONSTRUCTION 70MM; JUSQU'À PL E (ISO 13849-1)/ SIL3 (CEI 61508)

SIMATIC S7-300; CPU 312C COMPACT CPU WITH MPI; 10 DI/6 DO; 2 FAST COUNTERS (10 KHZ); INTEGRATED 24V DC POWER SUPPLY; 64 KBYTE WORKING MEMORY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD REQUIRED

MICROMASTER 4 RESISTANCE DE FREINAGE 200-240 V 180R 1000 W PK 50 W CONT 230 X 72 X 43;5 MM H X L X P IP20

SIMATIC DP; POWER SUPPLY MODULE 24V FOR ET200ISP

SIPLUS HMI MP 377 12" TOUCH BASED ON 6AV6644-0AA01-2AX0 WITH CONFORMAL COATING

SIMATIC S7-1200; DIGITAL OUTPUT SM 1226; F-DQ 4X 24 V DC 2A; PROFISAFE; 70 MM OVERALL WIDTH; UP TO PL E (ISO 13849-1)/ SIL3 (IEC 61508)

SIMATIC DP; TERMINAL MODULE TM-IM/EM60C FOR ET200ISP; FOR THE INTEGRATION OF ONE IM152-1 AND ONE ELECTRONIC MODULES; SPRING-LOAD TERMINALS; INCL. POWER BUS TERMINATING MODULE

PROT. CIRCUIT RESISTOR 2R0 OHM 20W 5%

CONTACTEUR DE PUISSANCE; AC-3 25 A; 11 KW / 400 V; 400 V CA; 50 HZ 3 PÔLES; TAILLE S0 BORNE À VIS

SINAMICS S120 CONVERTISSEUR POWER MODULE PM340 ENTREE: 380-480V CA 3PH;50/60HZ SORTIE: 10A CA 3PH (4;0KW) FORME BLOCKSIZE TAILLE DE CONSTRUCION FSB AVEC FILTRE RESEAU INCORPORE REFROIDISSEMENT A AIR INTERNE

SIMATIC PG; FIELD PG FIELD PG PENTIUM III REPLACEM. BATTERY LI-IONS 6 AH

WINCC SYSTEM SOFTWARE V6.0+SP2; RUNTIME; ON CD-ROM RT128 (128 POWER TAGS) VERSION FOR ASIA SINGLE LICENSE

WINCC FLEXIBLE 2008 RUNTIME POWERPACK 512 > 2048 POWER TAGS RUNTIME SW; SINGLE LICENSE; LICENSE KEY ON USB STICK

WINCC POWERPACK F.VERSION V5.X RUNTIME LICENSE W/O VERSION CONVERSION FROM 256 TO 64K POWER TAGS

SIMATIC S5 095U - 240 VAC 0;5A - ENTREE 16X24VDC - SORTIE 16X24VDC 0;5A - SIMATIC S5; S5-95U COMPACT UNIT WITH PROFIBUS INTERFACE

SIMATIC MOBILE PANEL 170 WITH INTEGRATED ENABLING BUTTON CONFIGURABLE W. PROTOOL/LITE VERSION V6.0+SP2 AND HIGHER

WINCC/WEB NAVIGATOR V6.2; POWERPACK FROM 10 TO 25 CLIENTS; SINGLE LICENSE

SIMATIC TOUCH PANEL TP177B DP BLUE MODE STN-DISPLAY MPI-/PROFIBUS-DP PROTOCOL RS485-/RS422-/USB INTERFACE PRINTER - INTERFACE SLOT FOR MMCARD CONFIGURABLE WITH WINCC FLEXIBLE 2005

SIMATIC MP270 MULTI PANEL 10" TFT DISPLAY 8 MB FLASH-EPROM / 32 MB RAM CONFIGURABLE W. PROTOOL FROM VERSION V5.2

"DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 7;0...10A AC-3; 4;0 KW/400V POUR MOD. BRAKE CONTROL".

MIGRATION SUBRACK II FOR AS 488/TM WITH 5 I/0 SLOTS FOR INSERTION OF AS 488/TM SYSTEM INTO THE TELEPERM M CABINET

SIMATIC RF300 TRANSPONDEUR RF350T 32 KO FRAM; -25 A +85 DEG. C; IP68; 50 X 50 X 20 MM INCL. CADRE DE FIXATION"

MICROMASTER 440 AVEC FILTRE CLASSE A INTEGRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT CONSTANT 30 KW SURCHARGE 150% 60 S; 200% 3 S MOMENT QUADRATIQUE 37 KW 650 X 275 X 245 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMATIC S7-300;FRONT CONNECTOR WITH SCREW CONTACTS; 40-PIN.

SIMATIC S7-200; DIGITAL INPUT EM 221; FOR S7-22X CPU ONLY; 8 DI; 24V DC; SINK/SOURCE INPUT

DS1E-X FOR ET200S HIGH FEATURE DOL STARTER SETTING RANGE 2.4...16 A MECHANICAL SWITCHING ELECTRONIC PROTECTION AC-3; UP TO 7.5 KW / 400 V EXPANDABLE FOR BRAKE CONTROL MODULE 2DI MODULE 2DI MODULE MOTOR STARTER ES CIRCUIT BREAKER SIGNALING PARAMETERIZABLE

SIMOREG K CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6)A(B6)C; 3-PHASE AC 400V CONTROLLABLE FIELD RECTIFIER D420/100 MREQ-GEG 6V62

MECHATRONICS FINITE ELEMENTS SIMULATION

SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0;41M

SINAMICS G120 POWER MODULE PM240 WITHOUT FILTER WITHOUT BULT IN BRAKING CHOPPER 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 160KW FOR 160% 3S;136% 57S;100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 200KW FOR 150% 3S;110% 57S;100% 240S AMBIENT TEMP 0 TO +40 DEG C 1533 X 326 X 545 (HXWXD); FSGX PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP