LISTA DE PRODUCTOS POR FABRICANTE SIEMENS

SIMATIC NET CP342-2PROCESSEUR DE COMMUNICATION

SIMATIC MOBILE PANEL 177 DP WITH INTEGRATED ENABLING BUTTON AND STOP BUTTON; CONFIGURABLE WITH WINCC FLEXIBLE COMPACT VERSION 2005 AND HIGHER OR TIA PORTAL V11 AND HIGHER

AS-INTERFACE; ADDRESSING UNIT NO SERVICE FUNCTIONS WITH CHARGING UNIT AND ADAPTER

SIMOTICS S SERVOMOTEUR SYNCHRONE 1FK7 COMPACT; 3;0 NM; 100K; 3000TR/MIN; 0;82KW A REFROIDISSEMENT NATUREL; IM B5 (IM V1; IM V3); CONNECTEUR D'ENERGIE/DE SIGNAUX CONNECTEUR ORIENTABLE DE 270 DEGRES; CODEUR ABSOLU SIMPLE 32 I/TR (CODEUR A-32); REDUCTION DE PUISSANCE A 10% A CAUSE DU CODEUR ABSOLU ARBRE LISSE; TOLERANCE N AVEC FREIN DE MAINTIEN; PROTECTION IP64;

SIMOTICS S SERVOMOTEUR SYNCHRONE 1FK7 COMPACT 3;0NM; 100K 3000TR/MIN; 0;82KW À REFROIDISSEMENT PAR CONVECTION NATURELLE IM B5 (IM V1; IM V3) CONNECTEUR DE PUISSANCE / DE SIGNAUX CONNECTEURS ORIENTABLES À 270° CODEUR ABSOLU ENDAT 2048 TRAITS/TOUR (CODEUR A-2048)

SIMOTICS S SYNCHRONOUS SERVOMOTORS 1FK7 COMPACT 3.0 NM; 100K; 3000 RPM; 0;82KW NATURAL AIR COOLING; IM B5 (IM V1; IM V3) POWER/SIGNAL CONNECTORS CONN. CAN BE ROTATED BY 270 DEGR.; ABSOLUTE ENCODER ENDAT 2048 P/REV (ENCODER A-2048); PERFORMANCE REDUCTION BY 10% DUE TO ABSOLUTE ENCODER; PLAIN SHAFT; TOLERANCE N; WITH HOLDING BRAKE DEGREE OF PROTECTION IP65 FLANGE ON DRIVE END IP67

CABLE DE RACCORDEMENT POUR MOBILE PANELS (MPI/PROFIBUS); LONGUEUR 5 M.

SIMATIC DP; ELECTRONIC MODULE F. ET200S; 2 AI TC HIGH FEATURE 15 MM WIDE; 15 BIT + SIGN WITH INTERNAL TEMPERATURE COMPENSATION

SINAMICS G120 MODULES DE PUISSANCE PM240 NON FILTRE A HACHEUR DE FREINAGE INTEGRE 3PH 380-480 V +10/-10% 47-63 HZ PUISS. SURCHARGE ELEVEE:1;1 KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C 173X73 X 145 (H X L X P); FSA DEGRE DE PROTECTION I

SIMATIC PANEL PC 477 15" TOUCH DISPLAY; 1024 X 768; STANDARD FRONT W. USB INTERFACE DC 24V PUWER SUPPLY; PENTIUM III 933MHZ; 133MHZ FSB; PROFIBUS DP 12; 512 MBYTE SDRAM; W/O 2. MASS STORAGE 1 GBYTE COMPACT-FLASH; WINCC FLEXIBLE RT 512 PT PREINSTALLED WINDOWS XP SP2 EMBEDDED PREINSTALLED

SIMATIC TP 277 6" TOUCH PANEL 5.7" TFT DISPLAY 4 MB CONFIGURING MEMORY; CONFIGURABLE WITH WINCC FLEXIBLE 2005 STANDARD OR HIGHER

SIMATIC S7; CARTE MÉMOIRE RAM POUR S7-400; FORME DE CONSTRUCTION LONGUE; 16 MO

SINUMERIK FM-NC/810D/DE/840D/DE MMC 100.2 AVEC LOGICIEL SYSTEME AVEC INTEL 486 AFFICHAGE COMMUTABLE: AL/AN

SINAMICS S120 SINGLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V; 60A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

SIMATIC S7; MEMORY MODULE MC 291; FOR CPU 215/216 16 KBYTE EEPROM

SIMATIC S5; 942 CPU F. S5-115U PC RAM; 10K BYTES RECEPTACLE F. MAX. 32K BYTES

SIMATIC HMI KTP1000 BASIC COLOR PN; BASIC PANEL; KEY AND TOUCH OPERATION; 10" TFT DISPLAY; 256 COLORS; PROFINET INTERFACE; CONFIGURATION FROM WINCC FLEXIBLE 2008 SP2 COMPACT/ WINCC BASIC V10.5/ STEP7 BASIC V10.5

SIMATIC S5; 435 DIGITAL INPUT MODULE; FLOATING; FOR S5-115U PLC; 16 INPUTS 115 V AC/DC; IN GROUPS OF 4

SIMATIC S7-400; CP 441-1 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 1 CHANNEL INCL. CONFIG. PACKAGE ON CD

SIMATIC S5 373 MEMORY SUBMODULE EPROM; 32K BYTES

SIMATIC S5 460 ANALOG INPUT MODULE FLOATING MEASURING RANGE MODULE REQUIRED 8 INPUTS

SINUMERIK 805/810/820 BATTERY PLUG-IN UNIT FOR 3 MIGNON

INTERFACE MODULE FOR MINI FLOPPY DISK UNIT

OPTION MODULE TERMINAL EXPANSION FOR 6RA70. REF 6RX1700-0AK00

CLOSED-LOOP CONTROL AND CONTROL MODULE CU3 SOFTWARE VERSION 1.1

SIMATIC DP; 1 TERMINAL MODULE TM-E30S44-01 FOR ET 200S FOR ELECTRONIC MODULES 30MM WIDE; SCREW-TYPE TERMINALS 4X4 TERMINAL CONNECTIONS W/O TERMINAL LEAD TO AUX1; AUX1 IN LINE.

SIMOVERT MASTERDRIVES MOTION CONTROL MEAS. VAL. ENCODER MOD. FOR RESOLVER W/O PULSE ENCODER SIMULATION SBR1 DELIVERY W/O OPERAT. INSTRUCT.

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG VERSION; 4 MBYTES.

SIMATIC S5 930 POWER SUPPLY MOD. F.S5-100U 115/230V AC; 24V DC; 1A

SIMATIC S5; ENTREES ANALOG. 464 AVEC SEP. GALVANIQUE POUR S5-90U/-95U/-100U; ET 100U; ET 200U 2 ENTREES +-500MV; PT100

CARTE DE CONTROLE POUR MODULE SIMOREG

SIMATIC DP; BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE I/O SUBMODULES FOR INSERT/REMOVE.

SIMATIC S7-300; SORTIE TOR SM 322; À SÉPARATION GALVANIQUE; 8 SORTIES TOR; 120/230V CA; 1A; 1X 20 PÔLES

SIMOREG K CONTROL BOARD C98043-A1600-L1

SIMATIC S7-300; FM 352 ELECTRON. CAM-OPERATED CONTROL INCL. CONFIG. PACKAGE ON CD

CONTROL AND PRECHARGE MODULE PET1 WITH PHASE CONTROL F. INFEED UNITS OF DESIGN E 3AC 380-480V; 50/60HZ

CONTROL SYSTEM MODULPAC C MODULE A1.02

SIMODRIVE 611 POWER MODULE; 1 AXIS; 108 A; INTERNAL COOLING MOTOR RATED CURRENT: 1PH = 45 A ASYNCHRONOUS = 45 A

SIMATIC DP; MODULE BASE BM 141 ET 200X; 8E TOR 24 V CC; CONN. M12 5 PTS; DOUBLE AFFECT.; IP66/67; INTERFACE PROFIBUS-DP INTEGR. 12MBPS; CONNEX. ALIM INTEGR.

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AI; 13 BIT RESOLUTION; U/I/RESISTANCE; PT100; 66 MS MODULE UPDATE; 40 PIN

SIMATIC S7-400; IM CABLE WITH K BUS; 1.5 M

SINAMICS S120 DOUBLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3-PH 400V; 9A/9A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

SIMATIC S7-300 CPU 317-2 PN/DP; CENTRAL PROCESSING UNIT WITH 1 MB WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-200; CPU 224XP COMPACT UNIT; DC POWER SUPPLY 14 DI DC/10 DO DC; 2 AI; 1 AO 12/16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/2 A

SIMODRIVE 611 POWER MODULE; 1 AXIS; 50 A; INTERNAL COOLING; MOTOR RATED CURRENT: 1FT5 = 25 A; 1FT6 = 18 A; 1PH = 24 A; INDUCTION MOTORS = 24 A.

SIMODRIVE 611 POWER MODULE; 2 AXES; 15 A; INTERNAL COOLING; MOTOR RATED CURRENT: FEED = 5 A MAIN SPINDEL = 5 A

SIMODRIVE 611 UNIVERSAL HR 2-AXIS CONTROL LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1 VPP ABSOLUTE VALUE ENCODER ENDAT SPEED-/TORQUE SETPOINT EXPANDABLE BY OPTIONS

SIMATIC S5; 375 MEMORY SUBMOD. CMOS EPROM; 16 KBYTES

SIMATIC S7-400; CPU 416-2 CENTRAL PROCESSING UNIT WITH: 2.8 MB WORKING MEMORY; (1.4 MB CODE; 1.4 MB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP.

SIMATIC PANEL PC 677 15" TOUCH; 1024X768; WITH FRONT SIDE USB INTERFACE AC110-230V; POWER CABLE EUROPE PENTIUM M760/2.0 GHZ; 533 MHZ FSB; 2MB SLC; 1GB DDR266 SDRAM (1 X 1GB); 160 GBYTE SATA HARD DRIVE 3;5" DVD+-RW+-R; WINDOWS 2000 PROF MUI (EN;GE;FR;IT;SP;JP;CHN;KOR)

SIMATIC HMI KP400 BASIC COLOR PN; BASIC PANEL; KEY OPERATION; 4" WIDESCREEN-TFT-DISPLAY; 256 COLORS; PROFINET INTERFACE; CONFIGURATION FROM WINCC BASIC V11 SP2/ STEP 7 BASIC V11 SP2..

SINAMICS S120 SINGLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3-PH 400V; 9A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

SIMATIC ET 200SP; BASE-UNIT BU15-P16+A10+2D; TYPE DE BU A0; BORNES PUSH-IN; AVEC 10 BORNES AUX; NOUVEAU GROUPE DE CHARGE; LXH: 15MMX141MM.

SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH STANDARD; 2 AXES SIN/COS 1 VPP; NC SOFTWARE; REQUIRED FROM 06.04.09

SIMATIC S7-300; FM 351 POSITIONING MODULE FOR RAPID/ CREEP FEED DRIVE INCL. CONFIG. PACKAGE ON CD

SITOP MODULAR 40 ALIMENTATION STABILISEE ENTREE: 3X 400-500 V CA SORTIE: 24 V CC/40 A

ET 200S COMPACT; 16DI/16DO STD DC24V; 3MS; DC24V; 0.5A EXPANDABLE WITH UP TO 12 ET 200S MODULES (NO F-MODULES) ELECTRONICBLOCK

SIMATIC S7;SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION; 4 AO; 16 BIT RESOLUTION; 0-10V; 1-5V; +/-10V; +/-20MA; 0/4 - 20MA; 20 PIN; FIT FOR ISOCHRONE MODE IMPROVED DP-CYCLE TIME FOR ISOCHRONE MODE

SIMATIC S7-400; SM 421 DIGITAL INPUT MODULE; OPTIC. ISOLATED; 16 DI; 24 - 60V UC; ALARM; DIAGNOSTICS

SIMATIC TOUCH PANEL TP 177 MICRO FOR SIMATIC S7-200 5.7" BLUE MODE STN DISPLAY CONFIGURABLE WINCC FLEXIBLE 2004 MICRO HSP UPWARDS

SIMATIC DP; RAIL FOR ET 200M 483 MM LONG F. MAX. 5 BUS MOD. FUNCTION: INSERT/REMOVE

SIMODRIVE 611 POWER MODULE; 1 AXIS; 25 A; INTERNAL COOLING; MOTOR RATED CURRENT: 1FT5 = 12.5 A; 1FT6 = 9 A; INDUCTION M. = 8A

SIMATIC S5; IM 90 INTERFACE MODULE FOR THE EXPANSION OF THE S5-90U WITH MAX. 6 S5-100U I/O MODULES; WITH 24V DC AND 9V BUS SUPPLY

CARTE VIDEO DISPLAY MODULE WF 470B (COLOR) 3 RECEPTACLES F. MEMORY MODULES 2ND SERIAL INTERFACE; GERMAN; ENGLISH; FRENCH; RUSSIAN

SINUMERIK PCU 50.3-P ELECTRONIC CONTROL DEVICE PM760; 2.0 GHZ; 1024 MB RAM; 24 V DC; WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)

SINAMICS S120 SENSOR MODULE SMC20 BOARD FOR EVALUATION OF INCREMENTAL ENCODER: SIN/COS 1VPP ABSOLUTE ENCODER: ENDAT WITHOUT DRIVE-CLIQ CABLE 30 MM WIDTH

SIMATIC HMI; KTP700 BASIC DP; BASIC PANEL; KEY AND TOUCH OPERATION; 7" TFT DISPLAY; 65536 COLORS; PROFIBUS INTERFACE; CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13; CONTAINS OPEN SOURCE SW WHICH IS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI HIGH FEATURE 24V DC; 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT

SIMODRIVE 611 POWER MODULE; 1 AXIS; 15 A INTERNAL COOLING; MOTOR RATED CURRENT: 1FT5 = 7.5 A; 1FT6 = 5 A; INDUCTION M. = 5A

MICROMASTER 420 UNFILTERED 3AC 380-480V 10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

SIMATIC S5 375 MEMORY SUBMODULE EPROM; 16K BYTES

SIMATIC S5; CARTOUCHE MEM. 375 EEPROM; 4 KO.

OP 5/A2 OPERATOR PANEL 4 LINE DISPLAY; 20 CPL 1 X TTY/V.24 AND 1 X RS422/485/ /MPI/PPI/SINEC L2-DP

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO RELAY 24V DC - 230V AC/5A;15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT); 5 UNITS PER PACKING UNIT

SIMATIC DP; ELECTRONIC MODULE F. ET 200S; 1 COUNT 24V/100KHZ 15 MM WIDE; OPERATION MODES: COUNT; MEASURE; (PERIOD DURATION MEASUREMENT HIGH RESOLUTION) WITH CLOCK CYCLIC SYNCHRON.APP.

SIMATIC S7-200; BATTERY MODULE F. LONG-TERM BACKUP OF DATA PLUGGABLE IN MEMORY SUBMODULE SLOT OF S7-22X CPU COMMUNICATION REQUIREMENTS ACCORDING TO ARTICLE 33; REACH-REGULATION: THE ARTICLE CONTAINS THE FOLL. SUBSTANCE ON THE CANDIDATE LIST IN CONCENTRATIONS ABOVE 0.1 MASSES%: 1;2-DIMETHOXYETHANE; ETHYLENE GLYCOL DIMETHYL ETHER (EGDME) (CAS 110-71-4; EC NO 203-794-9).

SIMODRIVE 611 MONITORING MODULE; WITH HOUSING FOR 211/288 MM DEPTH

SIMATIC OPERATOR PANEL OP27 STN COLOR LC DISPLAY

SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT;1 AXIS;FOR DIGITAL DRIVES;FEED+MAIN SPINDLE DRIVES WITH DIRECT MEASURING SYSTEM; VOLTAGE SIGNALS

SIMATIC S5; MODULE DE BUS POUR S5-100U; ET100U; ET200U BORNIER AVEC BORNES A VIS

SIMATIC S5; SORTIES TOR 451-4 AVEC SEP. GALVANIQUE FORMAT CARTE 32 SORTIES 24 V CC.

SINAMICS V90; WITH PROFINET INPUT VOLTAGE: 380-480 V 3 A -15%/+10% 2.6 A 45-66 HZ OUTPUT VOLTAGE: 0 – INPUT 2.1 A 0-330 HZ MOTOR: 0.75 KW DEGREE OF PROTECTION: IP20 SIZE A; 80X180X200 (WXHXD)

ET 200S COMPACT; 32DI STD; DC24V; 3MS; EXPANDABLE WITH UP TO 12 ET 200S MODULES (NO F-MODULES) ELECTRONICBLOCK

SIMATIC DP; ELECTRONIC MODULE 2 AI I HIGH FEATURE FOR ET 200S; 15 MM WIDE; CYCLE TIME PER MODULE: 0.5MS; +/-20MA; 15 BIT + SIGN; 4 .. 20MA; 15 BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)..

SINAMICS S120 SINGLE MOTOR MODULE ENTREE: 600V CC SORTIE: 3PH 400V; 30A FORME BOOKSIZE REFROIDISSEMENT PAR AIR INT. SEQUENCES D IMPULSIONS OPTIMISEES ET SUPPORT DES FONCTIONS EXTENDED SAFETY INTEGRATED AVEC CABLE DRIVE-CLIQ

SIRIUS BLOC LOGIQ. DE SECURITE AVEC CIRUIT VALIDATION (CV); 24V CC 45.0MM; BORNES A VIS; CV INSTANT.: 2NO; CV TEMP.: 2NO 0.5...30NF; CS: 1NF; DEMARR. AUTOM.; APPAREIL DE BASE; MAX. ERR. SIL: 3/2; PL: E/D

SIMOVERT MASTERDRIVES MOTION CONTROL COMMUNICATIONS MODULE SIMOLINK SLB

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 4 AO; U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS; 20 PIN; REMOVE/INSERT W. ACTIVE; BACKPLANE BUS.

SIMATIC DP; BASIC MOD. BM142 ET 200ECO: 16 DO DC 24 V/0.5 A; 8 X M12; DOUBLE-ASSIG.;IP65/67; CONNECTION BLOCK 6ES7194-3AA00-0.A0 MUST BE ORDERED SEPARTELY MUST BE ORDERED SEPARTELY

SIMATIC S5; CP 524 PROCESSEUR DE COMMUNICATION POUR API; MINIORDINATEUR

SIMATIC DP; IM151-8 PN/DP CPU FOR ET200S; 192 KB WORKING MEMORY; INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLER; W/O BATTERY MMC REQUIRED

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED 16DI; 24 V DC; SOURCE INPUT; 1 X 20 PIN

STANDARD CONFIGURATION AXIAL WINDER ON MEMORY MODULE MS320 FOR TECHNOLOGY BOARDS T300 W/O MANUAL

SINAMICS S120 ACTIVE LINE MODULE ENTREE: 3PH 380-480V; 50/60HZ SORTIE: 600V CC; 92A; 55KW FORME BOOKSIZE REFROIDISSEMENT PAR AIR INT AVEC CABLE DRIVE-CLIQ

"DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 4;5...6;3A AC-3; 2;2 KW/400V POUR MOD. BRAKE CONTROL".

SINUMERIK PCU 50.3-C ELECTRONIQUE APPAREIL DE CONTROLE CM370; 1;5 GHZ; 1 X 512MO RAM 24 V CC; WINDOWS XP PROFESSIONAL FOR EMBEDDED SYSTEMS (WINXP PRO EMBSYS)

SIMATIC S7-300; DUMMY MODULE DM 370; FOR USE WITH MODULE EXCHANGE

SIMODRIVE 660 CENTRAL PROCESSING UNIT G1

SIMATIC DP; TB32L TERMINAL BLOCK; 32 CHANNELS FOR ET 200L SCREW-TYPE TERMINAL