SIMATIC S7 LEUKHARDT

SIMATIC S7-300; CPU 314 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 64 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

SIMATIC S7-400; CP 441-1 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 1 CHANNEL INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; ELECTRONIC MODULE FOR ET 200L 16 DO; 24 V DC/0.5 A

SIMATIC S7-200; DIGITAL OUTPUT EM 222; FOR S7-22X CPU ONLY; 8DO; (RELAY OUTPUTS) 2A

SIMATIC DP; TERMINAL MODULE TM-C120S FOR ET 200S COMPACT; SCREW-TYPE TERMINALS; 4 X 21 CONNECTORS; FIT FOR 32PT MODULES IN 2-WIRE

SIMATIC S7-300;INTERFACE MODULE IM 365 FOR CONNECTING AN EXPANSION RACK; W/O K-BUS; 2 MODULES + CONNECTING CABLE 1M

SIMATIC S7-200; CPU 224XP COMPACT UNIT; DC POWER SUPPLY 14 DI DC/10 DO DC; 2 AI; 1 AO 12/16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S7-300; CP 341 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24) INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; ELECTRONIC MODULE ET200S; 4AI STANDARD I-2-WIRE; 4 - 20MA; 13BIT; 15MM WIDTH; FOR 2-WIRE TRANSDUCER CYCLE TIME 40 MS/MODULE WITH LED SF (GROUP FAULT)

SIMATIC S7-200; BATTERY MODULE F. LONG-TERM BACKUP OF DATA PLUGGABLE IN MEMORY SUBMODULE SLOT OF S7-22X CPU COMMUNICATION REQUIREMENTS ACCORDING TO ARTICLE 33; REACH-REGULATION: THE ARTICLE CONTAINS THE FOLL. SUBSTANCE ON THE CANDIDATE LIST IN CONCENTRATIONS ABOVE 0.1 MASSES%: 1;2-DIMETHOXYETHANE; ETHYLENE GLYCOL DIMETHYL ETHER (EGDME) (CAS 110-71-4; EC NO 203-794-9).

SIMATIC S7-300; CPU 313C; COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO 1 PT100; 3 FAST COUNTERS (30 KHZ); INTEGRATED 24V DC POWER SUPPLY; 64KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-400; FM 450-1 FUNCTION MODULE F. COUNT.FUNCT. WITH 2 CHANNELS INCL. CONFIG. PACKAGE ON CD

ET 200S COMPACT; 16DI/16DO STD DC24V; 3MS; DC24V; 0.5A EXPANDABLE WITH UP TO 12 ET 200S MODULES (NO F-MODULES) ELECTRONICBLOCK

SIMATIC S7-300 CPU 315-2 PN/DP; CENTRAL PROCESSING UNIT WITH 384 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300; FM 352 ELECTRON. CAM-OPERATED CONTROL INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; 1 TERMINAL MODULE TM-E30C44-01 FOR ET 200S FOR ELECTRONIC MODULES 30MM WIDE;SPRING-LOAD TERMINALS 4X4 TERMINAL CONNECTIONS W/O TERMINAL LEAD TO AUX1; AUX1 IN LINE

SIMATIC DP; ELECTRONIC BLOCK FOR ET 200L; 16 DI/16 DO; 24V DC/0.5 A

6ES7223-1HF21-0XA0 - SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 4 DI / 4 DO RELAY; 5-30V DC; 250V AC

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 4 AO; U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS; 20 PIN; REMOVE/INSERT W. ACTIVE; BACKPLANE BUS.

SIMATIC DP; 5 UNIVERSAL TERMINAL MODULES TM-E15C26-A1 FOR ET 200S FOR ELECTRONIC MODULES 15MM WIDE; CAGE CLAMP TERMINALS 2X6 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE; 5 PIECES PER PACKAGING UNIT.

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/2 A

SIMATIC DP; ELECTRONIC BLOCK FOR ET 200L; 16 DI/16 DO; 24V DC/0.5 A..

SIMATIC DP; INTERFACE MODULE IM151-3 PROFINET ST FOR ET200S; TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 POWER; ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; 2X BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 32DO; 24V DC; 0.5A; 1 X 40 PIN; SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)

SIMATIC DP; IM151-8 PN/DP CPU FOR ET200S; 192 KB WORKING MEMORY; INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLER; W/O BATTERY MMC REQUIRED

TERMINAL BLOCK TP1 8 CHANNELS AND 2X2 TERMINALS FOR POTENTIAL SUPPLY SORT: SCREW TERMINAL WITHOUT LED; PACK. UNIT=1 PCS 16 POLE IDC CONNECT. FOR CABLE

SIMATIC BOX PC 620; AGP GRAPHICS; ONBOARD; 8/16/32 MB CONFIGURABLE; 10/100 MBIT/S ETHERNET RJ45; PC CARD (PCMCIA TYPE 3); WATCHDOG; TEMP. MONITORING: 2 X USB; 1 PCI; 1 ISA/PCI FREE PROCESSOR: CELERON 1.2 GHZ; 256 KB SLC; PROFIBUS/MPI 12 MIT/S; TTY; 2X40 GB (2.5") + DVD-ROM 256 MBYTE RAM SDRAM-133 WITHOUT FDD; 24 V DC; 85 VA INDUSTRIAL POWER SUPPLY; WINNT 4.0 WORKSTATION ENGLISH; SP 5; (6A INCLUDED); WITHOUT EXPANSION 2

TERMINAL BLOCK TPR; RELAY INPUT 24 V DC; OUTPUTS 8 NO 230 V AC/2 A; 60 V DC/0.2 A; SPRING TERMINAL; PCK = 1 PIECE

SIMATIC S7-1200; COMMUNICATION COMMUNICATION MODULE CM 1241; RS232; 9 PIN SUB D (MALE); SUPPORTS MESSAGE BASED FREEPORT

SIMATIC DP; DISTRIBUTED I/O ET200X: EM148-FC; FREQUENCY CONVERTER; 1.5KW INTEGR. NETWORK FILTER; CONNECTION TO DESINA; IP65

SIMATIC DP; ELECT. SUBMODULE FOR ET 200ISP; 4 DO; DC 17;4V/27MA; "H"-SHUT DOWN

SIMATIC DP; ELECT. SUBMODULE FOR ET 200IS; 4 DI NAMUR

SIMATIC DP; ELECT. SUBMODULE FOR ET 200IS; 2 AI; 2DMU; 0(4) - 20MA; FOR CONNECTION OF 2-WIRE TRANSDUCER

SIMATIC DP; ET200PRO CONNECTING MODULE FOR FAILSAFE ELECTRONIC MODULE 4/8 F-DI/4 F-DO DC24V/2A

SIMATIC DP; PROFIBUS DP INTERFACE MODULE IM154-2 HIGH FEATURE FOR ET 200PRO INCLUSIVE TERMINATING MODULE CONNECTING MODULE IM 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY

SIMATIC BOX PC 620; AGP-GRAPHIC; ONBOARD; 2 MBYTE 10/100 MBIT/S ETHERNET RJ45 WATCHDOG;TEMPERATURE MONITORING USB 1 PCI; 1 ISA/PCI FREE PROCESSOR: CELERON 500 MHZ; 128KB SLC; WITH MPI/PROFIBUS 12 MIT/S; WITH TTY 20 GBYTE HDD EIDE; 64 MBYTE RAM (1 X 64 MBYTE SDRAM); FLOPPY DISK; 1.44 MB; 3.5"; 24 VOLT DC INDUSTRY POWER SUPPLY WITH NAMUR; WINDOWS 98 SE ENGLISH; WITHOUT EXPANSIONS 2

SIMATIC S7-400; CPU 414-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE 128 KB WORKING MEMORY

SIMATIC S7-1200; CPU 1215C; COMPACT CPU; DC/DC/RELAY; 2 PROFINET PORT; ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0-10V DC; 2 AO 0-20MA DC; POWER SUPPLY: DC 20;4 -28;8 V DC; PROGRAM/DATA MEMORY: 100 KB

SIMATIC S7-400; PS 405 POWER SUPPLY; 4A; 24V DC; 5V/4A DC

SIMATIC C7-635 KEYS; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU314C-2 DP AND OP170B; 24 DI; 16 DO; 5 AI; 2 AO; MICRO MEMORY CARD AND CONNECTOR SET REQUIRED

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 192 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY USEABLE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 OR HIGHER

SIMATIC PANEL PC 477B ECRAN TACTILE 15"; 1024X768 FACADE STANDARD AV. INTERF. USB INTEL CELERON M 1;0 GHZ 1 GO RAM (DDR2); PROFIBUS DP 12 2 X ETHERNET 1 GBIT/S 4 X USB 2.0; 500MA; 1 X RS232 ( ALIMENTATION 24V CC 2 EMPLACEMENTS CF 1 X 1 GO COMPACT-FLASH LOGICIEL PREINSTALLE: WINDOWS XP EMBEDDED

SIMATIC S7; PROGRAMMERS PG720 P; 10.4" COLOR DSTN DISP. P 233 MMX; 32 MB RAM; CD-ROM 3.2 GB HD; WIN95; STEP5/STEP7 (V7.01/V4.02); MICRO/WIN V2.1 REPAIRS BY AUTHORIZED REGIONAL REPAIR CENTERS UNTIL JUNE 2004

SIMATIC S7; MEMORY CARD MC 951; SHORT VERSION FLASH EPROM; 16 KBYTES (8 BITS)

SIMATIC PCS 7; SOFTWARE; SERVER REDUNDANCY V7.1 (PO 2000); SINGLE LICENSE F.2 INSTALLATION R-SW; WITHOUT SW AND DOCU.; LICENSE KEY ON USB STICK; CLASS A; 5 LANGUAGES (G; E; F; I; S); EXECUTABLE UNDER WINSRV2003 REFERENCE HW: PCS7 547C: SERVER

SIMATIC DP; 5 TERMINAL MODULES TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE 5 PIECES PER PACKAGING UNIT

SIMATIC POWER PG 6ES7710-0AA31-1CB0

SIMATIC S7-200; CPU 224; COMPACT UNIT; DC POWER SUPPLY 14 DI DC/10 DO DC; 8 KB CODE/5 KB DATA; PROFIBUS DP EXTENDABLE

SIMATIC S7-400; POWER SUPPLY PS407;10A;120/230V UC;5V/10A DV FOR REDUNDANT USE

SIMATIC DP; MOUNTING RAIL FOR ET 200M; 530 MM LONG; FOR HOLDING UP TO 5 BUS MODULES FOR REMOVAL AND INSERTION FUNCTION

SIMATIC IPC427C (MICROBOX PC); PROCESSOR: CORE2 SOLO 1.2 GHZ;800 MHZ FSB; 3 MB SLC; MEMORY EXTENSION: 1 GBYTE DDR3 1066; SODIMM EXTENSION (HW): WITHOUT EXTENSION DRIVE CHANGEABLE (ACCESSIBLE) WITHOUT MASS STORAGE CHANGEABLE DRIVE INTERNAL (NOT ACCESSIBLE) WITHOUT INTERNAL DRIVE OPERATING SYSTEM: WITHOUT OPERATING SYSTEM

SIMATIC S7-400; IM461-3 RECEIVER INTERFACE MODULE DISTRIBUTED CONNECTION UP TO 102 M; WITH K BUS

SIMATIC DP; POWER RAIL BOOSTER SIGNAL AMPLIFIER FOR TRANSMITTING THE PROTOCOL OF PROFIBUS-DP USING COLLECTOR WIRES; MAX 500 KBIT/S

SIMATIC S7; PC ADAPTER F. CONNECTION OF PC W. C7; M7; S7-300(W/O FM353/354/357)/-400; FOR PC W/O FREE SLOT WITH RS232/RS485 CONVERSION

SIMATIC SC;ELECTRONIC SUBMODULE 2 DI; 24 V DC; 8 PIECES PER PACKAGING UNIT

SIMATIC S7-300; FUNCTION MODULE FM 353; FOR POSITIONING WITH STEPPER MOTOR; MODULE EXCHANGE W/O PG; PREQUISITE STEP7 V3.1 INCL. CONFIG. PACKAGE ON CD

SIMATIC S7; I/O MODULE FOR EXPANSION OF C7-633; C7-634; C7-623/P; C7-624/P; C7626/P;C7626/P DP TO 16DI; 16DO; 4AI; 4AO; 4 UI

SIMATIC C7-623/P; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU314;SIMATIC OP5;IM360 16 DI; 16 DO; 4 AI; 4 AO; 4 UI

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; DISTRIBUTED I/O ET200X: EXPANSION MODULE EM141 8 DE DC 24V; 5-PIN M12 CHANNEL DIAGNOSTICS SHORT-CIRCUIT AND WIRE BREAK PROCESS INTERRUPTS INPUT DELAY:0;5MS/3MS/15MS/20MS

SIMATIC DP; ELECTRONIC MODULES FOR ET200PRO 4 AO U HIGH FEATURE; +-10V; 0...10V; 1...5V; CHANNEL DIAGNOSTICS; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI TC 15 MM WIDE; 15 BIT + SIGN +/-80MV; CHARACTERISTICS LINEARIZATION FOR THERMOELEMENTS OF: B; E; J; K; L; N; R; S; T TYPES; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECT. SUBMODULE FOR ET200ISP; 4 AO HART; 4 - 20MA; FOR CONNECTION OF HART FIELD DEVICES

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AE; +/-5/10V; 1-5 V; +/-20MA; 0/4 TO 20MA; 16 BIT; 1 COMMON POINT(60 V COM.); 4 CHANNEL MODE: 10 MS; 8 CHANNEL MODE: 23-95 MS; 1 X 40 PIN.

SIMATIC S7-300; ANALOG INPUT SM 331; OPT. ISOL.;2/3/4 WIRE; 8AI; RESISTANCE; PT100/200/1000 NI100/120/200/500/1000; CU10; 16 (INTERN 24) BIT; 50MS;40 PIN

SIMATIC S7-300; CPU 314C-2 DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 192 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC SC;ELECTRONIC SUBMODULE 2 AI; 4..20MA; +/-20MA.

SIMATIC S7-1200; DIGITAL INPUT SM 1221; 16 DI; 24VDC; SINK/SOURCE INPUT

SIMATIC FIELD PG M2 STANDARD 2.2 GHZ CORE 2 DUO (T7500); DL MULTISTANDARD DVD RW; 15" SXGA+ DISPLAY (1400 X 1050) 120GB S-ATA HDD; 1X2GB DDR2 RAM POWER CABLE: D;F;NL;SP;B;A;S; FIN & KEYBOARD: F; B; SUI; WLAN APPROVAL F. EUROPE MODEM APPROVAL FOR EUROPE; WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; LICENSE STEP7 PROF; STEP5; STEP7 MICROWIN; STEP7 BASIC AND WINCC FLEXIBLE ADV.; INCL. EPROM ADAPTER AND S5-PLC CABLE; VERSION OF SOFTWARE 04/2009

SIMATIC DP; ELECTRONIC MODULE FOR ET200PRO; 4 DO DC 24V; 2.0A; MODULE DIAGNOSTICS; INCLUSIVE BUS MODULE; CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY

SIMATIC S7-300; FM 352 ELECTRON. CAM-OPERATED CONTROL INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-400; CPU 416-2 1.6 MB WORKING MEMORY (0.8 MB CODE; 0.8 MB DATA) 1. INTERFACE MPI/DP 12 MBIT/S 2. INTERFACE DP

SIMATIC S7;CONNECTING CABLE FOR HMI ADAPTER AND PC/TS ADAPTER; (RS232 / ZERO MODEM CABLE); 6 M

SIMATIC S7-400; UR2 RACK; CENTRALIZED AND DISTRIBUTED WITH 9 SLOTS

SIMATIC S7-400; DIGITAL OUTPUT SM 422; 16 DO; 20 - 120V AC; 2A OPTIC. ISOLATED; 1 POINT PER COMMON

SIMATIC S7-400; UR2 RACK ALU; CENTRALIZED AND DISTRIBUTED WITH 9 SLOTS; 2 REDUNDANT PS PLUGGABLE

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; TIME STAMPING FIT FOR ISOCHRONE MODE

SIMATIC DP;BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE; 15;8 X 59 X 35;6 MM (WXHXD); IPCD TECHOLOGY FAST CONNECT; WITH PG SOCKET

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH MPI; 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 24 KBYTE WORKING MEMORY

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 4 DI / 4 DO RELAY; 5-30 V DC; 250 V AC

SIMATIC DP; IM151-7 CPU FOR ET200S; 96 KB WORKING MEMORY WITH INTEGRATED PROFIBUS DP INTERFACE (9 PIN SUB-D; FEMALE) AS DP SLAVE; W/O BATTERY

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

SIMATIC DP; ET 200ECO PN; 16 DI 24V DC; 8 X M12; DOUBLE-ASSIGNEMENT; DEGREE OF PROTECTION IP67

SIMATIC S7-300; CPU 317F-2DP; CENTRAL PROCESSING UNIT WITH 1024 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.2 SP1 AND HIGHER

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD.

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; U/I/THERMOCOUPLE/RESISTANCE INTERRUPT; DIAGNOSTICS; RESOLUTION 9/12/14 BITS; 8AI; REMOVE/INSERT W. BACKPLANE BUS 20 PIN

SIMATIC PC FI25 OPTION 1 19"-VISUSSYSTEM;PENTIUM 133; 8 MBYTE RAM; 3.2 GB HD; 10.4" DSTN COLOR DISPLAY; IP65 FRONT; 36 PROGRAMMABLE FUNCTION KEYS; MS-DOS 6.22

SIMATIC S7-200; CPU 226 COMPACT UNIT; AC POWER SUPPLY 24 DI DC/16 DO RELAY; 16/24 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC DP; POWER MODULE PM-E F PROFISAFE; FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849); 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET-NETWORKS W. IM151-3 HF

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG DESIGN; 8 MBYTE

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16 DI; AC/DC 24 - 48V WITH ONE CHANNEL PER COMMON; 1 X 40 PIN

SIMATIC DP; BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET; 15;8 X 54 X 39;5 MM (WXHXD); TERMINAT. RESIST. WITH ISOLAT. FUNCTION; WITH PG SOCKET

SIMATIC ET 200SP; MODULE DE SORTIE TOR; DQ 4X24VCC/2A STANDARD; ADAPTE A TYPE BU A0; CODE DE COULEUR CC02; DIAGNOSE DE MODULE

SIMATIC DP; DISTRIBUTED I/O DEVICE LINK DP/PA COUPLER NON EX-VERSION 1000MA/31V FIELD BUS COUPLER BETWEEN PROFIBUS DP AND PROFIBUS PA FOR EXPANDED TEMPERATURE RANGE PROTECTION CLASS IP 20

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200; 3.3 V NFLASH; 64 KBYTES.

SIMATIC ET 200SP; PROFINET INTERFACE MODULE ET 200SP IM155-6PN HIGH FEATURE MAX. 64 PERIPHERY MODULES; 0.25 MS ISOCHRONOUS MODE MULTI HOT SWAP; INCL. SERVERMODUL

SIMATIC S7; DIAGNOSIS-REPEATER FOR PROFIBUS DP; FOR ONLINE PROFIBUS CABLE DIAGNOSTICS; DP-STANDARD SLAVE TO 12MBIT/S; DEGREE OF PROTECTION IP20; FAST-CONNECT TECHNOLOGY

SIMATIC DP; BASIC MODULE BM142 ET 200ECO: 8 DO DC 24 V/2 A; 8 X M12; SINGLE-ASSIGNEMENT; DEGREE OF PROTECTION IP65/67; CONNECTING BLOCK 6ES7194-3AA00-0.A0 MUST BE ORDERED SEPARTELY