SIMATIC S7 LEUKHARDT

SIMATIC S7; RAM MEMORY CARD FOR S7-400; LONG VERSION; 1 MBYTE

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 SI SERIAL INTERFACE ONE CHANNEL; 15MM WIDE RS232/422; 485 ASCII; 3964R

SIMATIC S7-300 CPU 319-3 PN/DP; CENTRAL PROCESSING UNIT WITH 1;4 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; 3. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300; CPU 312 IFM CENTRAL PROCESSING UNIT WITH 10 DI/6 DO; 1 X 20 PIN.; COUNTER; FREQUENCY MEASUREMENT INTEGRATED POWER SUPPLY 24V DC 6 KBYTES WORKING MEMORY

SIMATIC DP; 5 TERMINAL MODULES TM-E15S24-A1 FOR ET 200S FOR ELECTRONIC MODULES 15 MM WIDE;SCREW-TYPE TERMINALS 2X4 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE; 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE ET 200S: 2 AI HIGH SPEED U; 15 BIT; 15 MM WIDE; CYCLE TIME OF MODULE: 0.1MS; WITH LED SF (GROUP FAULT)

SIMATIC DP; TB16L TERMINAL BLOCK; 16 CHANNELS FOR ET 200L SCREW-TYPE TERMINAL

SIMATIC S7; CARTE MÉMOIRE POUR S7-400; FORME DE CONSTRUCTION LONGUE; EPROM FLASH 5 V; 4 MO

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT.

PLC MODUS MODULE CP341 CLÉ ÉLECTRONIQUE MODBUS POUR CP341 / CP 441 (DONGLE)

SIMATIC DP; CONNECTING BLOCK M12; 7/8" FOR ET200ECO; 2 X M12 AND 2 X 7/8"; 2 ROTARY CODING SWITCH FOR PROFIBUS-DP; ADDRESS SETTING

SIMATIC S7-400; PS 405 POWER SUPPLY; WIDE RANGE 10A; 24/48/60V DC; 5V/10A DC ATEX APPROBATION IDENTIFICATION

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 16 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER; ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D INCL. TERMINATING MODULE

SIMATIC S7-400; CPU 413-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE 72 KB WORKING MEMORY

SIMATIC S7-400H; CPU 414H CENTRAL UNIT FOR S7-400H AND S7-400F/FH; 4 INTERFACES: 1 MPI/DP; 1 DP AND 2 FOR SYNC MODULES; 1.4 MB MEMORY (700 KB DATA/700 KB CODE)

SIMATIC S7-400; CPU 414-2 DP CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE INTEGR. PROFIBUS DP INTERFACE 384 KB WORKING MEMORY

SIMATIC DP; TERMINAL MODULE TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE

SIMATIC S7-1500; CPU 1516-3 PN/DP; CENTRAL PROCESSING UNIT WITH WORK MEMORY 1 MB FOR PROGRAM AND 5 MB FOR DATA; 1ST INTERFACE: PROFINET IRT WITH 2-PORT SWITCH; 2ND INTERFACE: PROFINET RT; 3RD INTERFACE: PROFIBUS; 10 NS BIT PERFORMANCE; SIMATIC MEMORY CARD REQUIRED

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: 24 V DC/10 A

SIMATIC S7-200; CPU 221 COMPACT UNIT; AC POWER SUPPLY 6 DI DC/4 DO RELAY 4 KB CODE/2 KB DATA

SIMATIC S7-300; CPU 314 CPU WITH INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 313 CPU WITH INTEGRATED 24V DC POWER SUPPLY 12 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 313C COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO 1 PT100; 3 FAST COUNTERS (30 KHZ); INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; MICRO MEMORY CARD REQUIRED

SIMATIC DP; ELECTRONIC MODULE DIGITAL; FOR ET 200B; W=235MM; 24DI 24V DC; 8DO 24V DC; 0.5A 3 MS INPUT DELAY

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 8 DI DC 24 V; SINK/SOURCE; 8 DO DC 24V; 0.75A/POINT SOURCE

SIMATIC S7-300; CPU 314 CPU W.MULTI POINT INTERFACE MPI INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC S7-300;INTERFACE MODULE IM 361 IN EXPANSION RACK FOR CONNECTING TO CENTRAL RACK (IM360);24 V DC SUPPLY VOLTAGE; WITH K-BUS

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24) INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-200; DIGITAL OUTPUT EM 222; FOR S7-22X CPU ONLY; 8DO; (RELAY OUTPUTS) 2A.

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC S7-200; CPU 222 COMPACT UNIT; AC POWER SUPPLY 8 DI DC/6 DO RELAY 4 KB CODE/2 KB DATA; PROFIBUS DP EXTENDABLE

SIMATIC S7-400; CPU 417-4 CENTRAL PROCESSING UNIT WITH: 20MB WORKING MEMORY; (10 MB CODE; 10 MB DATA) 1. INTERFACE MPI 12 MBIT/S; 2. INTERFACE PROFIBUS DP; 3./4. IF IFM MODULES PLUGGABLE

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; 8 AI; 13 BIT RESOLUTION; U/I/RESISTANCE/PT100; NI100; NI1000; LG-NI1000; PTC / KTY; 66 MS MODULE UPDATE; 1 X 40 PIN

SIMATIC S7-300; CPU317-2 DP; CENTRAL PROCESSING UNIT WITH 1 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY

SIMATIC DP; MODULE DE BUS POUR ET 200M POUR LE MONTAGE DE 2 IM153-2 RED. POUR FONCTION DÉBROCHAGE ET EMBROCHAGE PENDANT LE FONCTIONNEMENT (RUN) ECCN:9N9999

SIMATIC S7-200; CPU 224XP COMPACT UNIT; AC POWER SUPPLY 14DI DC/10DO RELAY; 2AI; 1AO; 12/16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3;3 V NFLASH; 64 KBYTES

SIMATIC S7-300; SIGNAL. MODULE FOR 3 SSI SENSORS FOR READ-IN OF POSITIONING VALUE WITH 2 FREEZE INPUTS ; 1 X 20 PIN; SUPPORTS ISOCHRONE MODE

SIMATIC SC; TERMINALBLOCK TB16IM-SC FOR IM-SC; WITH SCREW-TYPE TERMINALS

SIMATIC S7-300; RAIL L=530MM

SIMATIC S7; TEXT DISPLAY FOR S7-200; 2 LINES WITH CABLE (2.5M) A.MOUNTING ACCESS. EAN: 4025515160403.

SIMATIC S7-400; TERMINATOR FOR RECEIVER IM461-3 INTERFACE MOD.

SIMATIC S7-400; FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACT; 48-POLE

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC PG; PROGRAMMER PG720 PII;12;1" SVGA-TFT-DISPL. CELERON 500; 64 MB RAM; 6 GB HD STEP5 V7.12; STEP7 V5.0 SP3 MICRO/WIN V3.02; WIN98

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AO I 15 MM WIDE; +/-20 MA; 13 BIT + SIGN; 4 . .20 MA; 13 BIT CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT).

SIMATIC DP; ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; TIME STAMPING FIT FOR ISOCHRONE MODE

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16DI; 24 V DC; 20 PIN

SIMATIC DP; ELECTRONIC MODULE 2 AI U HIGH FEATURE FOR ET 200S; 15 MM WIDE; CYCLE TIME PER MODULE: 0.5MS; +/-10V; 15 BI + SIGN; +/-5V;15BIT+SIGN; 1..5V; 15BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STANDARD 15 MM WIDE +/-10 V; 13 BIT + SIGN +/-5 V; 12 BIT+ SIGN; 1..5V; 12BIT; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; 5 ELECTRON. MODULES ET200S: 2DO RELAY(FORM C CONT.) DC24V-48V/5A; AC24V-230V/5A; 15 MM WIDTH; FIRST-UP SIGNAL; 5 PIECES PER PACKAGING UNIT.

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO STANDARD DC 24V/0.5A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC S7; MICRO MEMORY CARD P. S7-300/C7/ET 200; 3.3 V NFLASH; 2 MBYTES

SIMATIC DP; ET 200M INTERFACE IM 153-4 PN IO HIGH FEATURE FOR MAX. 12 S7-300 MODULES; SUPPORTS FAIL SAFE MODULES; HART MODULES SHARED DEVICE; MEDIUM REDUNDANCY PROTOCOL.

SIMATIC S7-400; CPU 416-2 CENTRAL PROCESSING UNIT WITH: 5.6 MB WORKING MEMORY; (2.8 MB CODE; 2.8 MB DATA); 1. INTERFACE MPI/DP 12 MBIT/S; 2. INTERFACE PROFIBUS DP

SIMATIC S7; MEMORY CARD FOR S7-300; SHORT VERSION; 5V FLASH EPROM; 32 KBYTES

SIMATIC S7-300; CP 341 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; TERMINAL MODULE TM-P15S23-A0 FOR ET 200S FOR POWER MODULES 15 MM WIDE;SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 INTERRUPTED.

SIMATIC C7-623; COMPACT STATION WITH INTEGRATED COMPONENTS: S7-300 CPU; SIMATIC OP5; IM360 16DI;16DO;4AI;1AO;4 UNIV. DI

SIMATIC DP; PNEUMATIC MODULE EM 148-P FOR ET 200X 4 DI;/2 DO PNEUMATIC 2 X 4/2 WAY VALVE FLOW RATE 300 L/MIN

SIMATIC DP; ET 200M INTERFACE IM 153-2 FO HIGH FEATURE FOR MAX. 8 S7-300 MODULES; WITH REDUNDANCY; W. INTEGR. FO INTERFACE FOR CONFIGURING AN OPTICAL LINE

6ES7713-1BB15-0AF2 - SIMATIC FIELD PG M2 PREMIUM 2.2 GHZ CORE 2 DUO (T7500); DL MULTISTANDARD DVD RW; 15" SXGA+ DISPLAY (1400 X 1050) 250GB S-ATA HDD; 1X2GB DDR2 RAM POWER CABLE: D;F;NL;SP;B;A;S; FIN & KEYBOARD: F; B; SUI; WLAN APPROVAL F. EUROPE MODEM APPROVAL FOR EUROPE; WINDOWS XPPROF ENGLISH MUI WITH GE/FR/SP/IT ON HDD AS IMAGE; LICENSE STEP7 PROF; STEP7 MICROWIN; STEP7 BASIC AND WINCC FLEXIBLE ADV.; VERSION OF SOFTWARE 08/2008

SIMATIC S7-200; DIGITAL OUTPUT EM 222; FOR S7-22X CPU ONLY; 8DQ; 24 V DC

SIMATIC S7-400H; PATCH CABLE FO 2M FOR SYNC-MODULE

SIMATIC DP; ET200PRO CONNECTING MODULE FOR FAILSAFE ELECTRONIC MODULE 8/16 F-DI DC24V

SIMATIC DP; DISTRIBUTED I/O ET 200X: MOUNTING RAIL 400 MM; NARROW VERSION FOR MAX. 1 BM AND 3 EM

SIMATIC DP; ELECTRONIC BLOCK FOR ET 200L; DIGITAL; 16 DI; 24V DC; EXPANDABLE WITH MAX. 16 CHANNELS W. TERM. BLOCK TB 16SC OF SMART CONNECT

SIMATIC DP; MODULE CARRIER NARROW VERSION FOR IO MODULES ET 200PRO; LENGTH: 500 MM

SIMATIC DP; ELECTRONIC MODULE DIGITAL; FOR ET200B; W=235MM; 8DI/8RO; 120/230V AC; APPLICABLE ON TB6/AC

SIMATIC S7; PC/MPI CABLE FOR CONNECTING PC TO SIMATIC S7 FOR PC W/O FREE SLOT WITH RS232C/RS485 CONVERSION 5M

SIMATIC S7-400; ADAPTER MODULE --CANNOT BE ORDERED SEPARATELY- ONLY AS PART OF THE COMPL.PROD.

SIMATIC S7; MEMORY CARD FOR S7-1X00 CPU/SINAMICS; 3;3 V FLASH; 2 MBYTE

SIMATIC S7-400; CPU 412-2 PN CENTRAL PROCESSING UNIT WITH: 1 MB WORKING MEMORY; (0;5 MB CODE; 0;5 MB DATA); INTERFACES: 1. IF MPI/DP 12 MBIT/S (X1); 2. IF ETHERNET/PROFINET (X5)

SIMATIC DP; 5 TERMINAL MODULES TM-E15N24-A1 FOR ET 200S FOR ELECTRONIC MODULES 15MM WIDTH; FAST CONNECT TERMINAL; 2X4 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE; 5 PIECES PER PACKAGING UNIT

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 512 KBYTES

SIMATIC S7-1500; CPU 1511-1 PN; UNITE CENTRALE AVEC MEMOIRE VIVE 150 KO POUR PROGRAMME ET 1 MO POUR DONNEES; 1RE INTERFACE: PROFINET IRT AVEC COMMUT. 2 PORTS; 60 NS PERFORMANCE SUR BIT; SIMATIC MEMORY CARD NECESSAIRE

WF 706 POSITIONING AND COUNTER MODULE; 3 CHANNELS; EXPANDABLE BY 1 ANALOG MODULE WITH ADAPTER CASING FOR APPLICATION IN SIMATIC S7-400

SIMATIC S7; PG 740 TFT COLOUR DISPLAY; PENTIUM 133; 32MB RAM; CD-ROM DRIVE;1.6GB HD; WIN95; STEP5/STEP7; MICRO DOS/-WIN; 5 LANGUAGE VERSION (G;E;F;S;I)

SIMATIC C7-613; COMPACT UNIT WITH 4 LINE DISPLAY; KEYS AND S7-300 CPU313C WITH 24 DI; 16 DO; 5 AI; 2 AO; MICRO MEMORY CARD AND CONNECTOR SET REQUIRED

FRONT CONNECTOR WITH TWISTED RIBBON CABLE CONNECTION FOR 16 DIGITAL I/O MOD. OF THE S7-300; POWER SUPPLY VIA SPRING TERM.

SIMATIC S7; TD 100C TEXTDISPLAY FOR S7-200; 4 LINES; WITH MOUNTING ACCESSORIES; CONFIGURATION WITH STEP7-MICRO/WIN

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; CP341 COMMUNICATION PROCESSOR WITH 20MA INTERFACE (TTY) INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; ELECT. SUBMODULE FOR ET200ISP; 4 AI; TC; FOR CONNECTION OF THERMOELEMENS (VOLTAGE MEASUREMENT)

SIMATIC S7-300; CPU 315 CPU WITH INTEGRATED 24 V DC POWER SUPPLY; 48 KBYTE WORKING MEMORY

SIMATIC S7; RAM MEMORY CARD FOR S7-300; SHORT VERSION; 1 MBYTES

SIMATIC C7-621; COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU; OP 3; IM 621; 16DI; 16DO; 4AI; 1AO

SIMATIC DP; BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 35 DEGREE ANGLE CABLE OUTLET; IPCD TECHOLOGY FAST CONNECT; WITH PG SOCKET 15;8 X 54 X 39;5 MM (WXHXD)

SIMATIC DP; ET 200ECO PN; 8 DO DC 24V/1;3A; 4 X M12; DOUBLE-ASSIGNEMENT; DEGREE OF PROTECTION IP67.

SIMATIC DP; IM151-7 CPU FOR ET200S; 96 KB WORKING MEMORY INTEGR. PROFIBUS DP INTERFACE (9 PIN SUB-D; FEMALE) AS DP SLAVE; W/O BATTERY

SIMATIC S7-400; UR1 RACK ALU; CENTRALIZED AND DISTRIBUTED WITH 18 SLOTS; 2 REDUNDANT PS PLUGGABLE

SIMATIC DP; CONNECTING MODULE FOR POWER MODULES PM-E ET 200PRO ECOFAST CU DP; 1 X ECOFAST CONNECTION RS485

SIMATIC SC;ELECTRONIC SUBMODULE 2 DO; 24 V DC / 2 A

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/2A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE F. ET 200S; 1 COUNT 24V/100KHZ 15MM WIDE CONN. OF INCREMENTAL ENCODERS OPERATION MODE COUNT: SINGLE; CONTINUOUS OR PERIODICAL OPERATION MODE MEASUR.: SPEED; FREQUENCY OR PERIOD WITH DI; DO AND COMPAR. VALUE

SIMATIC S7-300; POWER CONNECTOR BETWEEN PS307 AND CPU'S OF OLDER GENERATION (BEFORE 2003) SPARE PART

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DI 230V AC 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC S7; PC ADAPTER USB F. CONNECTION OF S7-200/300/ 400; C7; WITH USB-CABLE (5M) CAN BE USED UNDER WINXP/VISTA/ WINDOWS 7 32/64BIT

SIMATIC DP; POWER MODULE PM-E F PROFISAFE; FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH GROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUS P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849); ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF