SIMATIC S7-300 LEUKHARDT

SIMATIC S7-300; COUNTER MODULE FM 350-1 FOR S7-300; COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS ISOCHRON MODE; MEASUREMENT MODE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 16 DO; 24V DC; 0.5A; 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE).

SIMATIC S7; DIGITAL INPUT SM 326; F-DI 24 X DC 24V; FAILSAFE DIGITAL INPUTS FOR SIMATIC S7 FAILSAFE SYSTEMS WITH DIAGNOST. INTERRUPT; UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); 1 X 40 PIN.

SIMATIC S7-300; CP341 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24)

IMATIC S5/S7; BASIC MODULE BM 142; ET 200X; 4DO 24V DC/2A 5-PIN M12; PROTECTION IP 65; INTEGR. PROFIBUS DP IF; 12MBAUD INTEGRATED PS INTERFACE

SIMATIC NET; CP 343-1 COMMUNICATIONS PROCESSOR FOR CONNECTION OF SIMATIC S7-300 W. IND. ETHERNET USING ISO AND TCP/IP; S7 COMM.; FETCH/WRITE; SEND/RECEIVE; WITH AND W/O RFC; 10/100 MBIT

SIMATIC S7-300;INTERFACE MODULE IM 365 FOR CONNECTING AN EXPANSION RACK; 2 MODULES + CONNECTING CABLE 1M

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 512 KBYTES

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 32 DO; AC 120V/230V; 1A; DOUBLE WIDTH HOUSING; 2 X 20 PIN

SIMATIC S7-300; FIRMWARE L INCL. CONFIG. PACKAGE FOR FM357-2; FOR POSITIONING AND PATH CONTROL OF STEPPER AND SERVO MOTORS; FORM OF DELIVERY: MEMORY CARD AND CD

SIMATIC S7; MEMORY CARD FOR S7-300; SHORT VERSION; 5V FLASH EPROM; 64 KBYTES.

SIMATIC S7; MICRO MEMORY CARD FOR S7-300/C7/ET 200; 3.3 V NFLASH; 128 KBYTES

SIMATIC S7-300; CPU 314C-2 PTP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED INTERFACE RS485; INTEGRATED 24V DC POWER SUPPLY; 96 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3.3 V NFLASH; 128 KBYTES

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24) INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO (RELAY); 1 X 40 PIN; 24V DC; 120 - 230V AC; 5A WITH INTEGR. SNUBBER F. IND. LOADS

SIMATIC S7-300; DIGITAL MODULE SM 323; OPTICALLY ISOLATED; 8 DI AND 8 DO; 24V DC; 0.5A AGGREGATE CURRENT 2A; 1X20 PIN.

SIMATIC S7; MICRO MEMORY CARD FOR S7-300/C7/ET 200; 3.3 V NFLASH; 4 MB

SIMATIC S7-300; CPU 314C-2DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 64 KBYTE WORKING MEMORY; FRONT CONNECTOR ( X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC DP; HART ANALOG INPUT SM 331; 8 AI; 0/4 - 20MA HART; FOR ET200M WITH IM153-2; 1 X 20-POLE; FEATURES: FW UPDATE; HART SECONDARY VARIABLES; REDUNDANCY; LOCAL DIAGNOSTIC BUFFER WITH TIMESTAMP

SIMATIC S7-300; CP341 COMMUNICATION PROCESSOR WITH RS422/485 INTERFACE INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; CPU 317F-2DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.2 SP1 AND HIGHER

SIMATIC S7-300; CPU 315-DP CPU WITH INTEGRATED 24 V DC PS; 64KB WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

SIMATIC S7-300; CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; INTEGRATED 24V DC POWER SUPPLY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-300 CPU 315-2 PN/DP; CENTRAL PROCESSING UNIT WITH 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300; CP341 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24) INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; CPU 313C-2DP COMPACT CPU WITH MPI; 16 DI/16 DO; 3 FAST COUNTERS (30 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S7-300; MOUNTING RAIL; LENGTH: 482.6 MM

SIMATIC S7-300 CPU319F-3 PN/DP; CENTRAL PROCESSING UNIT WITH 1400 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; 3. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 SP3 OR HIGHER

SIMATIC S7-300 CPU317F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 1.5 MBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-300 REGULATED POWER SUPPLY PS307 INPUT: 120/230 V AC; OUTPUT: 24 V/5 A DC

SIMATIC DP; ELECTRONIC BLOCK FOR ET 200L; 16 DI; 24V DC

SIMATIC S7-300; FRONT CONNECTOR FOR SIGNAL MODULES WITH SPRING CONTACTS; 40-PIN.

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY USEABLE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.4 OR HIGHER.

SIMATIC S7-300;FIRMWARE LX INCL. CONFIG. PACKAGE FOR FM357-2; FOR POSITIONING AND PATH CONTROL OF STEPPER AND SERVO MOTORS; FORM OF DELIVERY

SIMATIC S7-300; SORTIE TOR SM 322; À SÉPARATION GALVANIQUE; 16DA; 24V CC; 0;5A; 1X 20 PÔLES; COURANT TOTAL 4A/GROUPE (8A/BAUGRUPPE)

SIMATIC S7-300; CPU 317TF-2 DP; UNITÉ CENTRALE POUR TÂCHES D'AUTOMATISATION; TÂCHES TECHNOLOGIQUES ET DE SÉCURITÉ 1;5MO DE MÉMOIRE DE TRAVAIL; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP (DRIVE); INTÉGR. E/S POUR TECHNOLOGIE; CONNECTEUR FRONTAL (1X 40 PÔLES) ET MICROCARTE MÉMOIRE 8 MO NÉCESSAIRE

SIMATIC S7; MEMORY CARD FOR S7-300; SHORT VERSION; 5V FLASH EPROM; 512 KBYTES

SIMATIC S7; MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU; 3;3 V NFLASH; 512 KBYTES

SIMATIC S7; BACKUP BATTERY (LI) 3.6V/MIN. 0.85AH; FOR FOR S7-300 CPUS AND S5-90U

SIMATIC S7; MICRO MEMORY CARD P. S7-300/C7/ET 200; 3.3 V NFLASH; 8 MBYTES

SIMATIC S7; MICRO MEMORY CARD FOR S7-300/C7/ET 200; 3.3 V NFLASH; 128 KBYTES

SIMATIC S7-300; CPU 313C-2DP COMPACT CPU WITH MPI; 16 DI/16 DO; 3 FAST COUNTERS (30 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY; MICRO MEMORY CARD REQUIRED

SIMATIC S7; RAM MEMORY CARD FOR S7-300; SHORT VERSION; 512 KBYTES

SIMATIC S7-300; CONNECTING CABLE BETWEEN IM 360/IM 361 LENGTH: 1M

SIMATIC S7-300; CPU 318-2 DP 512 KBYTE USER MEMORY (256 KB CODE; 256 KB DATA 1ST INTERF. = MPI 12 MBIT/S; 2ND INTERF. = PROFIBUS DP

SIMATIC S7-300; CPU 314C-2DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 48 KBYTE WORKING MEMORY; MICRO MEMORY CARD REQUIRED

SIMATIC S7; MICRO MEMORY CARD F. S7300/ C7/ET 200; 3.3 V NFLASH; 512 KB

SIMATIC S7/M7; COUNTER MODULE FM 350-1 FOR S7-300 AND M7-300; COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS

SIMATIC S7-300; ANALOG OUTPUT SM 332; OPTICALLY ISOLATED; 8 AO; U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS; 40 PIN; REMOVE/INSERT W. ACTIVE; BACKPLANE BUS

SIMATIC S7-300; COUNTER MODULE FM 350-1 FOR S7-300; COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS INCL. CONFIG. PACKAGE ON CD

SIMATIC S7-300; CPU 315F CENTRAL UNIT FOR S7-300F; 192 KB WORKING MEM.; 40MM WIDE; 384 BYTES PAE/384 BYTES PAA; 2 INTERFACES: 1 MPI UND 1 DP INTEGRATED 24V DC POWER SUPPLY; MICRO MEMORY CARD REQUIRED.

SIMATIC S7; ANALOG INPUT SM336; 6 AI; 14 BIT; 40 PIN; FAILSAFE ANALOG INPUTS FOR SIMATIC S7F SYSTEMS WITH DIAGNOST. INTERRUPT

SIMATIC S7;SM 332 ANALOG OUTPUT CHANNEL TO CHANNEL ISOLATION; 4 AO; 15 BIT RESOLUTION; 0-10V; 1-5V; +/-10V; +/-20MA; 0/4 - 20MA; 20 PIN

SIMATIC S7-300; ANALOG OUTPUT SM 332; FLOATING; 2 AO; U/I; 11/12 BITS RESOL.; 20 PIN.; REMOVE/INSERT WITH ACTIVE BACKPLANE BUS

SIMATIC S7-300; DIGITAL INPUT SM 321; GALVANICALLY ISOLATED; 16DI; 24 V DC; 1 X 20 PIN; 0.05 MS INPUT DELAY

SIMATIC S7-300; RAIL L=2000MM

SIMATIC S7-300; CPU 313C; CPU COMPACTE AVEC MPI; 24 ENTRÉES TOR/16 SORTIES TOR; 4AE; 2AA; 1 PT100; 3 COMPTEURS RAPIDES (30 KHZ); ALIMENTATION INTÉGR. 24V CC; 128 KO DE MÉMOIRE DE TRAVAIL; CONNECTEUR FRONTAL (2X 40 PÔLES) ET MICROCARTE MÉMOIRE REQUISE

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: DC 24 V DC/5 A

SIMATIC S7-300 STABILIZED POWER SUPPLY PS307 INPUT: 120/230 V AC OUTPUT: 24 V DC/2 A

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 16 DO (RELAY); (2 X 8 DO); 20 PIN

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH MPI; 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY

SIMATIC S7; MICRO-CARTE MÉMOIRE POUR S7-300/C7/ET 200; 3; 3V NFLASH; 64 KO

SIMATIC DP; HART ANALOG OUTPUT SM 332; 2AO; 0/4 - 20MA HART; UP TO HART REV. 5.0; FOR ET200M WITH IM153-2; 1 X 20 PIN

SIMATIC DP; HART ANALOG OUTPUT SM 332; 8AO; 0/4 - 20MA HART; FOR ET200M WITH IM153-2; 20 PIN

SIMATIC S7-300; CPU 312C COMPACT CPU WITH MPI; 10 DI/6 DO; 2 FAST COUNTERS (10 KHZ); INTEGRATED 24V DC POWER SUPPLY; 16 KBYTE WORKING MEMORY; MICRO MEMORY CARD REQUIRED

FRONT CONNECTOR WITH TWISTED RIBBON CABLE CONNECTION FOR ANALOG (40PINS) S7-300 MODULES POWER SUPPLY USING TERMINALS

SIMATIC M7-300; CPU388-4 CENTRAL PROCESSING UNIT 80486DX2; 50 MHZ; 8MB RAM MPI; 1 SERIAL INTERFACE; EXP. BUS CONNECTOR

SIMATIC S7-300; CPU 314 FOR EXPANDED TEMPERATURE RANGE INTEGRATED 24 V DC POWER SUPPLY 24 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH MPI; FOR EXPANDED TEMPERATURE RANGE; 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 32 KBYTE WORKING MEMORY

SIMATIC S7-300; CPU 315-2 DP FOR EXPANDED TEMPERATURE RANGE INTEGRATED 24 V DC POWER SUPPLY 64 KBYTE WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

SIMATIC S7-300; CPU 315-DP CPU WITH INTEGRATED 24 V DC PS; 64KB WORKING MEMORY 2ND INTERFACE DP-MASTER/SLAVE

6ES7317-7TK10-0AB0 - SIMATIC S7-300; CPU 317T-3 PN/DP; CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY; 1024 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP(DRIVE); 3. INTERFACE ETHERNET PROFINET WITH 2 PORT SWITCH; INTEGRATED I/O FOR TECHNOLOGY; FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY

SIMATIC S7-300; ANALOG MODULE SM 335; OPTICALLY ISOLATED U/I; DIAGNOSTICS; INTERRUPT; 4 AI 14 BITS; RESOL.; 4 AO 11/12 BIT

6ES7335-7HF00-0AB0

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; FOR EXPANDED TEMPERATURE RANGE; 8 DO; DC 48-125V; 1.5A; 20 PIN

SIMATIC S7-300; DUMMY MODULE DM 370; FOR USE WITH MODULE EXCHANGE

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 16 DO; 120V AC; 0.5A; 20 PIN

SIMATIC S7-300; CABLE CELL LK 393 FOR F - MODULES L+ AND M FAILSAFE CONNECTIONS TO TERMINALS; 5 PIECES PER PACKAGING UNIT

SIMATIC S7-300; MANUAL CONFIGURATION; CPU DATA; MODULE DATA; OPERATIONS LIST; PAPER VERSION; ENGLISH

SIMATIC S7-300; DIGITAL OUTPUT SM 322; OPTICALLY ISOLATED; 8 DO; 120/230V AC; 2A; WITH 1 POINT PER COMMON AND SELECTABLE FAIL MODE; 1 X 40 PIN

SIMATIC S7-300; SIGNAL. MODULE FOR 3 SSI SENSORS FOR READ-IN OF POSITIONING VALUE WITH 2 FREEZE INPUTS; 20 PIN

SIMATIC S7-300; MANUAL F. POSITIONING MODULE FM354 ENGLISH

SIMATIC S7-300; TEMPERATURE CONTROL MODULE FM 355 S; 4 CHANNELS; STEP AND PULSE; 4 AI + 8 DI + 8 DO INCL. MULTI-LANG CONFIG. PACK.; MANUAL AND GETTING STARTED (GER/EN/IT) ON CD-ROM

FM 357-2 MANUAL; ENGLISH CURRENT EDITION

SIMATIC S7-300; FIRMWARE H INCL. CONFIG. PACKAGE FOR FM357-2; FOR POSITIONING AND PATH CONTROL OF STEPPER AND SERVO MOTORS; FORM OF DELIVERY: MEMORY CARD AND CD

SIMATIC S7-300; FRONT CONNECTOR FOR 6ES7331-7SF00-0AB0; TO IMPROVE THE ACCURANCY OF THERMOCOUPLE MEASUREMENT IN MODE INTERNAL COMPENSATION

SIMATIC S7-300; 10 DIN A4 LABELLING SHEETS COLOR: RED; 10 LABELLING STRIPS/SHEETS FOR SIGNAL MODULES (16 CHANNELS); MATERIAL: MEMBRANE; PREPERFO- RATED; FOR PRINTING ON A LASER PRINTER; 10 SHEETS PER PACKAGING UNIT

SIMATIC S7-300; LABELL. COVER FOR F - MODULES (SPARE PART) 10 PIECES PER PACKAGING UNIT

SINAUT ST7; TIM 33 D TELECONTROL UNIT FOR SIMATIC S7-300 WITH INT. MODEM MD3 FOR ANALOG TELEPHONE NETWORKS INCL. DCF 77 RECEIVER MODULE

SINAUT ST7; TIM 42 TELECONTROL UNIT FOR SIMATIC S7-300/S7-400 WITH MPI INTERFACE WITH RS232/RS485 INTERFACE FOR EXT. MODEM/RADIO DEVICE WITH INT. MODEM MD2 FOR DEDICATED LINES

SINAUT ST7; TIM 4R D COMMUNICATION MODULE FOR SIMATIC S7-300; S7-400; C7; PC; WITH TWO RS232/RS485- INTERFACES FOR SINAUT- COMMUNICATION VIA CLASSIC WAN NETWORKS; WITH MPI INTERFACE; WITH DCF77 RADIO CLOCK RECEIVER INCL. INTERFACE-ADAPTER- CABLE 6NH7

DEMO CASE SIMATIC S7-300 COMPACT WITH SIMULATION MODEL CAR WASH

SIPLUS S7-300 CPU315-2DP -25 ... +70 DGR C WITH CONFORMAL COATING EN50155 CONFORMITY BASED ON 6ES7315-2AG10-0AB0

SIFLOW FC070 24V EX CT VERSION SIMATIC S7-300 FUNCTION MODULE 80MM ENCLOSURE IP20 24V DC MODBUS FREQ./PULSE OUTPUT WITH (EEXIA) IIC APPROVAL

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH 20MA INTERFACE (TTY) INCL. CONFIG. PACKAGE ON CD