SIMATIC ET200S LEUKHARDT

TB PEN FOR ET 200S TERMINAL BLOCK PEN FOR STARTER WITH CONNECTION FOR FEEDER CABLE AND LOAD FOR INSTALLATION ON THE LEFT

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI HIGH FEATURE 24V DC; 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4 F-DO PROFISAFE; DC 24V/2A; 30 MM WIDTH UP TO PL E (ISO13849); UP TO SIL 3 (IEC 61508); ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF

SIMATIC DP; 5 TERMINAL MODULES TM-P15S23-A1 FOR ET 200S FOR POWER MODULES 15MM WIDE; SCREW-TYPE TERMINALS 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1 AUX1 IN LINE 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE 2 AI U HIGH FEATURE FOR ET 200S; 15 MM WIDE; CYCLE TIME PER MODULE: 0.5MS; +/-10V; 15 BI + SIGN; +/-5V;15BIT+SIGN; 1..5V; 15BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STANDARD 15 MM WIDE +/-10 V; 13 BIT + SIGN +/-5 V; 12 BIT+ SIGN; 1..5V; 12BIT; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 SI SERIAL INTERFACE ONE CHANNEL; 15MM WIDE RS232/422; 485 ASCII; 3964R

SIMATIC DP; TERMINAL MODULE TM-P15C23-A0 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 INTERRUPTED

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

65 MM TERMINAL MODULE FOR ET 200S INVERTER POWER MODULE IPM25 FS A WITHOUT FEEDER CONNECTION

ET 200S DISTRIBUTED I/O DIGITAL ELECTRONIC MODULE 4DO DC24V/0.5A HF (6ES7132-4BD00-0AB0)

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4/8 F-DI PROFISAFE; 24V DC; 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI RTD 15 MM WIDE; 15BIT + SIGN PT100 STD; PT100 KL; NI100 STD; NI100 KL; 150 OHM; 300 OHM; 600 OHM; CYCLE TIME 110 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC DP; 5 ELECTRONIC MODULES FOR ET 200S; 4 DO STANDARD 24 V DC/2 A; 15 MM WITH; 5 UNITS PER PACKING UNIT

SIMATIC DP; COUPLEUR IM151-1 STANDARD POUR ET200S; AVEC MODULE DE TERMINAISON VOLUME DONNEES 244 OCT. POUR ENTREES ET 244 OCT. P. SORTIES; MAX. 63 MODULES DE PERIPHERIE PROFIBUS DP V0 ET V1 LARGEUR STATION JUSQ. 2M; CONNEXION BUS PAR SUB-D 9 PTS.

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/2A; 15 MM WIDTH

EMBASE POUR ET 200S DS POUR DEPART-MOTEUR DIRECT; SANS BORNE D'ARRIVEE

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/0.5A; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC DP; 1 ELECTR. MODULE FOR ET 200S; 8 DI DC 24V 15 MM WIDTH; 1 PIECE PER PACKAGING UNIT

F-RS1E-X FOR ET 200S FAILSAFE REVERSING STARTER SETTING RANGE

SIMATIC DP; ELECTRONIC MODULE F. ET 200S; 1 SSI 25BIT/1MHZ 15MM WIDE MODULE FOR CONN. OF ABSOLUTE ENCODERS WITH SSI INTERFACE SYNCHRONOUS SERIAL INTERFACE WITH DI AND COMPAR. VALUE WITH CLOCK CYCLIC SYNCHRON. APP

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AO U; 15 MM WIDTH; +/-10 V; 13 BIT + SIGN; 1..5V; 12BIT; CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT)

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DO STANDARD DC 24V/0.5A; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT..

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 4 DI STANDARD 24V DC; 15 MM WIDTH; 5 PIECES PER PACKAGING UNIT

SIMATIC DP; IM151-8 PN/DP CPU FOR ET200S; 128 KB WORKING MEMORY; INT. PROFINET INTERFACE (WITH THREE RJ45 PORTS) AS IO-CONTROLER; W/O BATTERY MMC REQUIRED.

SIMATIC DP; ELECTRONIC MODULE 2 AI HIGH FEATURE U FOR ET 200S; 15 MM WIDE; +/-10V; 15 BI + SIGN; +/-5V;15BIT+SIGN; 1..5V; 15BIT; OPERATIONAL LIMITS +/-0.1% WITH LED SF (GROUP FAULT)

TB PEN FOR ET 200S TERMINAL BLOCK PEN FOR STARTER WITH CONNECTION FOR LOADS FOR MOUNTING IN THE CENTER

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO STANDARD DC 24V/0.5A; 15 MM WIDTH 5 PIECES PER PACKAGING UNIT

SIMATIC DP; POWER MODULE PM-E FOR ET200S; DC 24 - 48V; AC 24 - 230V; WITH DIAGNOSTICS AND BACKUP

DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 0;70...1;00A AC-3; 0;25 KW/400V POUR MOD. BRAKE CONTROL

SIMATIC DP; MODULE ÉLECTRONIQUE POUR ET200S; 2 ENTRÉES ANALOGIQUES STANDARD I-4DMU 15MM +/-20MA; 13 BITS+SIGNE 4.. 20MA; 12 BITS POUR TRANSDUCTEUR DE MESURE 4 FILS TEMPS DE CYCLE 65 MS/VOIE AVEC LED SF (DÉFAUT GROUPÉ)

SIMATIC DP; ELECTRON. MODULE F. ET200S; 4/8 F-DI PROFISAFE; 24V DC; 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF..

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D

SIMATIC DP; 1 ELECTRON. MODULE FOR ET 200S; 8 DO DC24V/0;5A; 15 MM WIDTH; 1 PIECE PER PACKAGING UNIT.

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 STEP 5V/204KHZ FOR POSITIONING STEPPER MOTOR 15MM WIDE; SINGLE CHANNEL; +/-5V INTERF. FOR POWER SECTION

SIMATIC ET 200SP OPEN CONTROLLER; CPU 1515SP PC2 + HMI 512PT; 8 GO DE RAM; CFAST 128 GO AVEC WINDOWS 10 IOT ENTREPRISE 64BITS; S7-1500 SOFTWARE CONTROLLER CPU 1505SP

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 PULSE PULSED GENERATOR AND TIMER MODULE; 15 MM WIDE; 2 CHANNELS

DS1E-X POUR ET200S DÉMARREUR DIRECT HIGH FEATURE PLAGE DE RÉGLAGE 0;3...3 A COMMUTATION MÉCANIQUE CONTACTEURS ÉLECTRONIQUES AC-3; JUSQU’À 1;1 KW / 400 V EXTENSIBLE POUR MODULE DE COMMANDE DE FREIN MODULE 2DI DÉPART-MOTEUR ES SIGNALISATION DU DISJONCTEUR PARAMÉTRABLE COMPATIBLE DPV 1 COMPATIBLE PROFIENERGY SUR PN

EMBASE POUR ET 200S DS POUR DEPART-MOTEUR DIRECT; AVEC BORNE D'ARRIVEE

SIMATIC DP; INTERFACE MODULE IM151-3 PN HF FOR ET 200S; TRANSMISS. RATE UP TO 100MBIT/S MAX. OF 63 PERIPHERAL MODULES UP TO 2M WIDTH CONNECTABLE; 2 X BUS INTERFACING VIA RJ45 INCL. TERMINATING MODULE

FREQUENCY CONVERTER FOR ET 200S CONVERTER POWER MODULE IPM25 MODULE WIDTH 65 MM 3AC380-480V 10/-15% 47-63HZ POWER 0.75 KW / 1.0 HP OVERLOAD 150% 60S; 200% 3S POWER RECOVERY EXPANDABLE WITH BRAKE CONTROL MODULE OPTION: EXT. EMC-FILTER (CL. A)

SIMATIC DP; TERMINAL MODULE TM-P15C22-01 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2 X 2 TERMINAL CONNECTIONS W/O TERMINAL LEAD TO AUX1; AUX1 IN LINE

"DS1-X POUR ET 200S DEPART-MOTEUR DIRECT ELECTROMEC.; A EXTENSION PLAGE DE REGLAGE 7;0...10A AC-3; 4;0 KW/400V POUR MOD. BRAKE CONTROL".

SIMATIC DP; ELECTRONICS MODULE FOR ET 200S; 4 AI TC; +/-80 MV; 15 MM WIDTH; 15 BIT+SIGN WITH SF LED (GROUP FAULT)

SIMATIC DP; SPARE PART TERMINATING MODULE FOR ET 200S

SIMATIC DP; INTERFACE MODULE IM151-1 BASIC FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; MAX. OF 12 POWER; ELECTR. OR MOTOR STARTER MODULES (NO F-MODULES) CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D CONN. INCL. TERMINATING MODULE.

DS1-X FOR ET 200S ELECTROMECHANICS LINE STARTER EXPANDABLE ADJUSTABLE RANGE 1.4...2.0A AC-3; 0.75 KW/400V FOR BRAKE CONTROL MODULE