CPU

SINUMERIK PCU 50 1;2 GHZ; 256 MO RAM; 24 V CC; WINDOWS NT WORKSTATION V4.0 POUR SYSTEMES INTEGRES (WINNT4.0 WS EMBSYS)

PROCESSOR MODULE PCD4.M145

MICROMASTER 420 A FILTRE INCORPORE CLASSE A MONOPH. 200-240 V +10/-10 % 47-63 HZ COUPLE CONSTANT 0;12 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 0;12 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

MICROMASTER 420 A FILTRE INCORPORE CLASSE A TRIPH. 200-240 V +10/-10 % 47-63 HZ COUPLE CONSTANT 3 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 3 KW 245 X 185 X 195 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

MICROMASTER 420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 4 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 4 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

PCA2.M1 - CPU MODULE

VIPA CPU 214DPM - SÉRIE 200V

INTEL® BAYTRAIL / BAYTRAIL-I SOC PROCESSOR J1900 SUPPORTS SINGLE CHANNEL DDR3L SO-DIMM 1333; UP TO 8GB 4 X COM 1 X HDMI; 1 X D-SUB; 1 X LVDS 2 X USB 3.0; 6 X USB 2.0; 2 X SATA2 1 X MINI-PCIE; 1 X MSATA (SHARED) 2 X REALTEK LAN 1 X TPM HEADER 9~36 V DC-IN (4-PIN DC-IN PWR CON)

SIMATIC RACK PC IL 40S

KIT M580 HSBY COMPOSÉ DE 2X BMEH584040 + 2X 490NAC0100

CARTE PRESSE NEGRI BOSSI

80C51 8-BIT MICROCONTROLLER FAMILY 8K­64K/256­1K OTP/ROM/ROMLESS; LOW VOLTAGE (2.7V­5.5V); LOW POWER; HIGH SPEED (33 MHZ)

OMRON CP1LM60DT1D CPU; (36) INPUT; (24) PNP OUTPUT; 10K STEPS PROGRAMS

SICOMP SMP-E018-A8 *KS: 2 CPU WITH 80188; 8 MHZ; 2 EPROM/SRAM/EEPROM HOLDERS; 2 V.24/V.28/20 MA INTERFACES; 16 I/8 O LEADS (TTL)

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CJ2M-CPU15.The equipment alternative reference is : CJ2MCPU15. This product comes from the CJ2M range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP1382-RT.The equipment alternative reference is : X20CP1382RT. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP1583. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP3583. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP3686X. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP0482. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP0484-1.The equipment alternative reference is : X20CP04841. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference NX102-1200.The equipment alternative reference is : NX1021200. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6ES7288-1SR30-0AA0.The equipment alternative reference is : 6ES72881SR300AA0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SELCA and commercialized under the reference SE298Q. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by MOTOROLA and commercialized under the reference 01-W3914B-02A.The equipment alternative reference is : 01W3914B02A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6FC5337-0BB33-0AE2.The equipment alternative reference is : 6FC53370BB330AE2. This product comes from the SINUMERIK 840D range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6SE6400-1DN00-0AA0.The equipment alternative reference is : 6SE64001DN000AA0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6AG1315-2FJ14-2AY0.The equipment alternative reference is : 6AG13152FJ142AY0. This product comes from the SIMATIC S7 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6AU1445-2AD00-0AA1.The equipment alternative reference is : 6AU14452AD000AA1. This product comes from the SIMOTION range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ALLEN BRADLEY and commercialized under the reference 1756-L82ES.The equipment alternative reference is : 1756L82ES. This product comes from the GUARDLOGIX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP1L-EL20DR-D.The equipment alternative reference is : CP1LEL20DRD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

OMRON CPU CS1G-CPU43H

CF693MBM100 MODBUS COMMUNICATION MODULE

1762 MICROLOGIX 1200 SYSTEM; MICROLOGIX 1200; 120/240V AC POWER; (10) STANDARD 24V DC AND (4) FAST 24V DC DIGITAL INPUTS; (10) RELAY OUTPUTS; WITH PROGRAMMING/HMI PORT

MICROMASTER 420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.55 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.55 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

MICROMASTER 420 UNFILTERED 3AC 200-240V 10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

MICROMASTER 420 WITH BUILT IN CLASS A FILTER 3AC 380-480V +10/-10% 47-63HZ CONSTANT TORQUE POWER 7.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 7.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

PCA1.M47M4 - PLC

TELEPERM C PROCESS CONTR.SYSTEM SAFEGUARD MODULE (L+;L-;PM)

THEMIS TSVME-105 CPU PROCESSOR BOARD MODULE

AS 230/AS 231 CENTRAL PROCESSOR RAM/EPROM MEMORY CONTROL MODULE VERSION CID

UNIDRIVE SP 2T - 1;1KW - 3A

SIMATIC DP; ELECTRONIC MODULE FOR ET200S; 2 AO U HIGH SPEED; 15 MM WIDTH; +/-10V; +/-5V; 1.. 5V; 16BIT; CYCLE TIME: 0.1 MS WITH LED SF (GROUP FAULT)

SIMODRIVE 611-A MAIN SPINDLE MODULE; 30/40 A; BASIC VERSION

SIMODRIVE 611-A FEED MODULE; 2 AXES; 2 X 4/8 A; STANDARD INTERFACE

SIMODRIVE 611-A FEED MODULE; 80/160 A; ENHANCED INTERFACE

DCP 642 - DIAS -05-04-642 - PROCESSOR MODULE ETEK - SIGMATEK

SIMOTION C230-2 PROGRAMMABLE MOTION CONTROLLER FOR PROFIBUS-; ANALOG AND STEPPER DRIVES; ONBOARD PERIPHERALS 18DI/8DO

TI 330S 37 CPU (VOOR SIMATIC TI505)

MODULE CPU DIAS - DCP 160 - SIGMATEK - ETEK

PHILIPS - P8 RACK LINE CPU

CONTROL BOARD

MC-4/11/10/400 PACDRIVE 13130247 10A SERVO DRIVE

SIMATIC BOX PC 627B; GRAPHIQUE INTEGRE;128 MO SHARED MEMORY; 2X10/100/1000 MBITS/S ETHERNET RJ45; 4 X USB V2.0 (HIGH CURRENT); 1 X SERIE (COM1) CONTROLEUR RAID EMBARQUE; COMPACT FLASH DRIVE NO. 1 FACE AVANT (SANS CF); WATCHDOG; SURVEILLANCE DE TEMPERATURE/VENTILATEUR; CELERON M 440 (1;86 GHZ; 1 MO L2; 533 MHZ BUS FRONTAL); 1 GO DDR2 667 SODIMM; ALIMENTATION INDUSTR. 24V CC; CARTE INTERFACE PCI AVEC COM2 + LPT (1 PCI LIBRE); 160 GO DD SATA; WINDOWS 2000 PROF. MULTILINGUE SP4 (AN; AL; FR; IT; ES); SANS EXTENSION (LOG.);

SIMOVERT P MIDI MASTER 3-PH. 380-500V; 50/60HZ; MD1500/3; RATED OUTPUT 15KW WEIGHT 24KG

SLC 500 SLC 5/05 PROCESSOR; 64K MEMORY; ETHERNET & RS-232 COMMUNICATION PORTS; SERIES B

UNIDRIVE SP5401 - 55KW - 124A

SIMOVERT P MICROMASTER 1/3-PH. 230V 50/60HZ; MM37/2 RATED OUTPUT 370W WEIGHT 1.8KG

BMX MODBUS SÉRIE 2 ESPACE ; RAIL DIN MONTAGE

MOMENTUM - UNITY M1E CPU RS232/485 E NET USB IOBUS

SIMATIC C7-621 ASI;COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU; OP 3 AND AS-INTERFACE (MASTER)

SELCA CONTROL BOARD SE294R

MICROLOGIX 1200; 120/240V AC POWER; (20) STANDARD 24V DC AND (4) FAST 24V DC DIGITAL INPUTS; (16) RELAY OUTPUTS

UCS II MODULEMODULE 128K/4MO 206202886 - 0206202886 - 202886 NUM

CONTROLLER MODUL WITH INTEGRATED PLC CPU C165 APPLICATION PROFIBUS DP

SIMATIC S5 CPU 941 F. S5-115U PLC RAM 2 KBYTES

MICROMASTER VECTOR MMV55/2 UNFILTERED 1AC/3AC 208-240V +/-10% 50/60HZ CONSTANT TORQUE: 0.55 KW OVERLOAD 150% 60SEC; 200% 3SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

SIMOVERT P MICROMASTER SINGLE-PH. 230V 50/60HZ; MM55 WITH MM55 FILTER RATED OUTPUT 550W WEIGHT 1.9KG

PROVIT 5000 CONTROLLER SYSTEM UNIT FOR INTEL CELERON AND PENTIUM III PROCESSORS; 4 MB VIDEO MEMORY; CHIPSET INTEL 82440 BX; 3 DIMM SLOTS; 2 SERIAL; 1 PARALLEL INTERFACE. CONNECTIONS FOR FPD; MONITOR; PS/2 AT KEYBOARD AND MOUSE; USB; EXT. FDD AND ETHERNET 10/100 (TWISTED PAIR). WITHOUT PROCESSOR.

PROCESSEUR WP84 AVEC EPROM 27256 POUR AUTOMATE GJR5230300R302

SIMATIC S7-300; CPU 315T-2 DP; CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S 2. INTERFACE DP(DRIVE); INTEGRATED I/O FOR TECHNOLOGY FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 8 MB NECESSARY

SINUMERIK 840D SL NCU 730.2 WITH PLC 317-2DP USER MEMORY: CNC: 3 MB; PLC: 128 KB INTERNAL HEAT DISSIPATION

IC693CPU352 SINGLE SLOT CPU MODULE; 240K BYTES CONFIGURABLE USER MEMORY; 4K I/O 25MHZ PROCESSOR SPEED

CIRCUIT BOARD; SENSOR-CPU

SINUMERIK 840DI MCI-BOARD EXTENSION

CPU MODULE240K USER MEMORY

POWER AMPLIFIER FOR DC VALVES ED00-104-10

CPU MODULE LOGIX5555 W/750KB MEM CONTROL LOGIX

GUARDLOGIX LOGIX5561 PROCESSOR WITH 2MB STANDART MEMORY AND 1MB OF SAFETY MEMORY

ALSPA C170 PROCESSING UNIT-BIT-PROCESSOR N10/NBUS NETWORK 7130-2

AXIS SLAVE COMPUTER MODULE

CARTE PROCESSEUR AUTOMATE V5 TSX47-40 LIAISON FIPIO/FIPWAY V5.6

ALTIVAR 18 DRIVE

CARTE PROCESSEUR AUTOMATE V5 TSX47-40 LIAISON FIPIO/FIPWAY V5.6

VARIATEUR MOTEUR BRUSHLESS SERVO AMPLIFIER 10 A

CARTE PROCESSEUR AUTOMATE V5 TSX47-40 LIAISON FIPIO/FIPWAY V5.6

CARTE SG2 TSX 80P2 R1

CARTE PROCESSEUR RÉGULATION UNITELWAY

M172 PERF. DISPLAY 42 I/O S; ETH; 2 MB

TSXP573634M UNITY PROCESSOR - 8 RACKS (12 SLOTS)/16 RACKS (4/6/8 SLOTS) - 1900 MA 5 V DC ETHERNET TCP/IP RJ45 PV: 14 SV: 2.5

SIMATIC BOX PC 840 V2; AGP GRAPH.; ONBOARD; 8/16/32 MB SHARED MEMORY; 10/100 MBIT/S ETHERNET RJ45 2 X USB (HIGH CURRENT); WATCHDOG;TEMPERATURE MONITORING ;2 PCI; 2 ISA/PCI; 1 ISA FREE; CELERON 2.0 GHZ; 400 MHZ FSB; 128 KB SLC; 1 GBYTE DDR SDRAM; 110/230V AC INDUSTR. POWER UNIT WITH NAMUR; POWER CABLE EUROPE; WITHOUT EXPANSION (HW); RAID1(SATA); 2X60GB(2.5") + FDD + DVD-ROM (1 FREE PCI LESS); WINDOWS XP PROF. MULTI-LANG. SP1;(EN; GER; FR; IT; SP); SP2 INCL. SIMATIC PC DIAGMONITOR SOFTWARE V3.1 INCL.

A350 CPU MODULE

SIMATIC S7-400H; CPU 416-5H; UNITE CENTRALE POUR S7-400H ET S7-400F/FH; 5 INTERFACES: 1X MPI/DP; 1X DP; 1X PN ET 2 POUR MODULES SYNC.; MEMOIRE 16 MO (10 MO DONNEES/6 MO PROGR.)

GE FANUC RX3I 1GHZ CENTRAL PROCESSING UNIT WITH HOT STANDBY REDUNDANCY

SIMATIC S7-1200; STARTER-BOX; CPU 1212C AC/DC/RLY; INPUT SIMULATOR; STEP7 BASIC CD; MANUAL CD; INFO MATERIAL; SYSTAINER

CONFIG TSX01-7 RAM

SINUMERIK 810/820-GA3; 805SM 6FX1138-5BB04 CPU; 16 MHZ; ACOP; FROM SW VERSION 2.X.

SIMATIC S5; CPU 948R CENTRAL PROCESSING UNIT FOR S5-155H; 1600 KB RAM

SINUMERIK 810D CCU2 MODULE WITH SYSTEM SOFTWARE (STANDARD) 1.5 MB NC USER MEMORY PLC 96 KB (MAX. 288 KB) PREP. FOR PROFIBUS-DP

SIMOVERT MASTERDRIVES 3-PH. 380-460 V; 370 A AFE-INFEED/REGENERAT. FEEDBACK UNIT; POWER CONN. MODULE NOM. POWER RATINGS: 200 KW AIR-COOLED