CPU

SICOMP AMS-M006-A8 *KS:3-4 CPU WITH 8086; 8 MHZ; 6 HOLDERS F. MEMORY MODULES 1 V.24/V.28 INTERFACE AND 24 PARALLEL I/O LEADS

CX8093 | EMBEDDED PC FOR PROFINET 32 BIT; 400 MHZ CPU – 512 MB MICROSD FLASH MEMORY

ALLEN-BRADLEY 5250-LP2 512K LOGIC PROCESSOR MODULE SERIE B

AUTOMATE PROGRAMMABLE SANS AFFICHEUR 14 ENTRÉES TOR 13 SORTIES TOR

SINUMERIK 810D/DE/840D/DE MMC103 WITHOUT SYSTEM SOFTWARE FOR OPEN ARCHITECTURE PENTIUM 200 MHZ; 128 MB D-RAM (WIN NT 4.0 PREINSTALLED) (OP.SYS.: SINUMERIK 840D BS003)

XENTA 711/731 SERVEUR WEB ET RÉGULATEUR

RX3I SERIES CENTRAL PROCESSING UNIT 1 GHZ SNP; SERIAL I/O; MODBUS SLAVE AND MASTER

SINUMERIK 840D SL TCU 30.3 (THIN CLIENT UNIT) FOR SINUMERIK/SIMOTION THIS PRODUCT CONTAINS ITEMS SUPPLIED BY THIRD PARTIES AND MAY ONLY BE RESOLD IN CONDITIONS WHERE THE SAME PROTECTION LEVEL APPLIES AS UNDER THE STANDARD CONDITIONS OF DELIVERY OF SIEMENS AG FOR HARDWARE PRODUCTS. IF REQUIRED; SIEMENS AG CAN SUPPLY THESE TERMS AND CONDITIONS. HTTPS://MALL.INDUSTRY.SIEMENS. COM/LEGAL/DE-EN/ALLGEM_ LIEFERBEDING_GL_H36_S0141_ N41_EN.PDF

UNITÉ CENTRALE OMRON; SÉRIE CP1L-EM; 18 ENTRÉES ; 12 SORTIES ; RELAIS

The equipment with type CPU is manufactured by MITSUBISHI and commercialized under the reference Q01CPU. This product comes from the MELSEC Q range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP0410. This product comes from the X20 SYSTEM range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20BB57. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by B & R and commercialized under the reference X20CP1684. This product comes from the X20 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP1L-EM40DT1-D.The equipment alternative reference is : CP1LEM40DT1D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by SIEMENS and commercialized under the reference 6ES7518-4FX00-1AC0.The equipment alternative reference is : 6ES75184FX001AC0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by LEROY AUTOMATION and commercialized under the reference LUC3302. This product comes from the LT range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by _GENERIQUE and commercialized under the reference MOTHERBOARD-BAC-A-COLLE.The equipment alternative reference is : MOTHERBOARDBACACOLLE. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ALLEN BRADLEY and commercialized under the reference 1756-L82E.The equipment alternative reference is : 1756L82E. This product comes from the CONTROLLOGIX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ADVANTECH and commercialized under the reference UNO-2372G.The equipment alternative reference is : UNO2372G. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ARBURG and commercialized under the reference ARBURG 669.The equipment alternative reference is : ARBURG669. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by GE FANUC and commercialized under the reference IC695CRU320-CD.The equipment alternative reference is : IC695CRU320CD. This product comes from the RX3I range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by PROFACE and commercialized under the reference PS3450A-T41.The equipment alternative reference is : PS3450AT41. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ALLEN BRADLEY and commercialized under the reference 1756-L81E.The equipment alternative reference is : 1756L81E. This product comes from the CONTROLLOGIX range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by BOSCH and commercialized under the reference 048379-101401.The equipment alternative reference is : 048379101401. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by BIZERBA and commercialized under the reference 65525000101. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by ALLEN BRADLEY and commercialized under the reference 1756-L8SP.The equipment alternative reference is : 1756L8SP. This product comes from the CONTROLLOGIX range. We guarantee the equipment in all the services offered for 12 months.

CPU MODULE240K USER MEMORY

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

GE FANUC CPU 374 CPU MODULE; 133 MHZ; 240K BYTES USER PROGRAM MEMORY WITH ETHERNET

GE FANUC SERIES 90-30 CPU MODULE WITH SERIAL PORTS

MASTER MODULE CONTROL BOARD; 1MB RAM

AS-9715-001 AEG MODICON 984 685 PC-0984-685 PROGRAMABLE CONTROLLER

SIMATIC S5; CPU 925 MODULE UNITE CENTRAL POUR L'AUTOMATES 150K

FAIL-SAFE / SAFETY PROGRAMMABLE LOGIC CONTROLLER (PLC) CPU PROCESSOR MOBILE MODULE WITH X2X LINK - ATEX COMPLIANT - SIL3 / PL.E / CAT.4 - ABB / B&R / BR / BANDR (X20 SAFELOGIC SERIES) - 4096 FUNCTION BLOCKS + 131KBYTES (MAKER MEMORY) CAPACITY - WITH 2 X RJ45 CONNECTORS - WITH ETHERNET POWERLINK + X2X LINK COMMUNICATION CAPABILITY - WITH OPENSAFETY MANAGER FOR UP TO 280 SAFENODES - 24VDC SUPPL. VOLTAGE - DIN RAIL MOUNTING (62.5MM WIDTH) - RATED FOR 0...+60°C AMBIENT

CONTROLLOGIX EXPANSION MEMORY MODULE 512K WORDS

UNITÉS CENTRALES | UNITÉS CENTRALES PROGRAMMABLES EN STEP7; STANDARD POWERED BY SPEED7 1 MB DE MÉMOIRE DE TRAVAIL MÉMOIRE EXTENSIBLE (MAX. 2 MB) MAÎTRE PROFIBUS-DP OU PTP (COMMUTABLE) ÉGALEMENT PARAMÈTRABLE AVEC WINPLC7; SIMATIC MANAGER; TIA PORTAL

ACP 1703 CP-2010 CENTRAL PROCESSOR

NUM 1040 CARTE FILLE SRAM 512KO

MICROMASTER 420 WITH BUILT IN CLASS A FILTER 3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 5.5 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 5.5 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

MICROMASTER 420 WITH BUILT IN CLASS A FILTER 1AC 200-240V 10/-10% 47-63HZ CONSTANT TORQUE POWER 3 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 3 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

MICROMASTER 420 WITH BUILT IN CLASS A FILTER 3AC 380-480V 10/-10% 47-63HZ CONSTANT TORQUE POWER 2.2 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 2.2 KW 202 X 149 X 172 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

PROCESSOR MODULE PCD4.M445 WITH 2 PROCESSORS AND AN ADDITIONAL PROFIBUS-FMS CO-PROCESSOR

CPU

SIMATIC S7-200; CPU 226 XM COMPACT UNIT; AC POWER SUPPLY 24 DI DC/16 DO RELAY; 16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S3 111 CONTROLLER UNIT BIN.INPUT MODULE;32 INPUTS;0.4A

TELEPERM C PROCESS CONTROL SYSTEM; SAFEGUARD MODULE (L+L;L+EL) MODULE WIDTH 15.24MM

AS 230/AS 231 CENTRAL PROCESSOR CONTROL UNIT; VERSION C/D

SIMATIC S7-300; CPU 313 W. INTEGR. 24V DC POWER SUPPLY 12 KBYTE WORKING MEMORY APPROX. 4 KAW; 0.6 MS/KAW

SINUMERIK 840C/840CE INTERFACE PLC DMP CONNECTION (UPTO 8 MOD.) PROGRAMMING UNIT AND 8 RAPID INPUTS 24 V

SIMODRIVE 611 POWER MODULE; 1 AXIS; 200 A; COOLING F. HOSE COOL. MOTOR RATED CURRENT: FEED = 70 A MAIN SPINDEL = 85 A

SIMODRIVE 611 POWER MODULE; 1 AXIS; EXTERNAL COOLING; MOTOR RATED CURRENT: FEED = 18 A MAIN SPINDEL = 24 A

SIMODRIVE 611 POWER MODULE; 1 AXIS; 300 A; INTERNAL COOLING; MOTOR RATED CURRENT: 1PH = 120 A

CPU UNIT

MICROMASTER 430 SANS FILTRE 3AC 380-480 V +10/-10% 47-63 HZ MOMENT QUADRATIQUE 90 KW SURCHARGE 110% 60 S; 140% 3 S 850 X 350 X 320 (H X L X P) DEGRE DE PROTECTION IP20 TEMP. AMB. -10 A +40 DEG. C SANS AOP/BOP

TURBO CPU

DPS 211 - 05-002-211 - BUS ALIMENTATION - RAVITAILLEMENT SUR LE BUS DIAS - 1 PRISE FIBRE OPTIQUE

CARTE CPU DE PRESSE À INJECTÉ DEMAG.

CENTRAL PROCESSOR CARD

MODULE SUCOS - CENTRAL PROCESSOR CARD

DSQC500 : CPU BOARD FOR ABB ROBOT TYPE : S4C+ IRB; REF : 3HAC 3616-1

CPU MODULE; E-BUS; MICROSOFT WINDOWS EMBEDDED CE 6.0; TWINCAT 2 PLC RUNTIME

DIGIDRIVE SKB3400150 - 1;5KW - 2HP

SIMOVERT P MICROMASTER SINGLE-PH. 230V 50/60HZ; MM25 WITH MM25 FILTER RATED OUTPUT 250W WEIGHT 1.9KG

SIMOVERT P MICROMASTER SINGLE-PH. 230V 50/60HZ; MM110 WITH MM110 FILTER RATED OUTPUT 1.1KW WEIGHT 2.6KG

SIMOVERT P MIDI MASTER 3-PH. 380-500V; 50/60HZ; MD3700/3; RATED OUTPUT 37KW WEIGHT 32KG

SIMOVERT P MIDIMASTER 3-PH. 230V +-15%; 50/60HZ; MD750/2; RATED OUTPUT 7.5KW WEIGHT 24.0 KG

X20 MODULE CPU; ATOM 1 GHZ; 256 MB DDR2 RAM; 1 MB SRAM

BORA-OTN150

RELAY BOARD - ZANUSSI VENDING CPU ATTUAZIONI PLUS

PCO3 (I/O BOARD) ELECTRONIC CONTROLLER

M580 PLC CPU; ETHERNET NETWORKING MINI USB INTERFACE; 4 MB PROGRAM CAPACITY; 24 V DC

PROCESSEUR PL7 DOUBLE FORMAT - TRANSPARENT READY -. 1 110 MA 5V CC.

SIMATIC C7-621 ASI;COMPACT UNIT WITH INTEGRATED COMPONENTS: S7-300 CPU; OP 3 AND AS-INTERFACE (MASTER); DESIGN LIKE C7-633/634 OR OP7/17

CONTROLLOGIX LOGIX5572 PROCESSOR WITH 4MB USER MEMORY; 0.98MB I/O MEMORY; 128;000 DIGITAL I/O; 4;000 ANALOG I/O; 1-USB PORT USB 2.0; FULL SPEED; 12 MBPS (ETHERNET/IP; CONTROLNET; DEVICENET; DATA HIGHWAY PLUS™; REMOTE I/O; SYNCHLINK™

VARIATEUR COURANT CONTINU TMD 2 QUADRANT 240 VAC 22 AMP TENSION INDUIT 0-170 VDC TENSION EXITATION 190VDC 2.5 AMP

VARIATEUR CC DCVN 4 QUADRANTS INTENSITE INDUIT PERMANENT 40 A INTENSITE LIGNE  60 A TENSION ENTREE 500 V +- 10% TENSION SORTIE MAX  520 VCC

4 MB V2 GRAPHIC PROCESSOR 0204202778 - 204202778 - 202778 NUM

NUM 1060 4 MB CNC PROCESSOR CARTE PROCESSEUR CN 4 MO 204202771 - 0204202771 - 202771 NUM

SIMODRIVE 611 POWER MODULE; 1 AXIS; 108 A; EXTERNAL COOLING; MOTOR RATED CURRENT: 1PH = 45 A INDUCTION MOTOR = 45 A

SIMATIC S7-400; CPU 416-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE 512 KB WORKING MEMORY

CPU MODULE240K USER MEMORY

MAIN PROCESSOR A CARD CU211

SINUMERIK 840D SL NCU 720.3B PN AVEC PLC 317-3 PN/DP MODULE DE VENTILATEUR DOUBLE MODULE DE BATTERIE

MITSUBISHI MELSEC-A A1SHCPU CPU MODULE

KEMRO K2-400 BL450/A PART 054202

CIRCUIT BOARD

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

CPU MODULE 240KB 4K I/O 8RACKS 2 SERIAL PORTS

SIMATIC S5 941 CPU FOR AG S5-115U RAM; 1 K INSTRUCTIONS AVAILABLE AS EXCHANGE ONLY!

CARTE PROC. MACH. 0204203123 NUM 1060 NUM 1062 V2 4MO. PROCESSEUR MACHINE 4 MO 204203123 - 0204203123 - 203123 NUM

ALTISTART 46 THREE-PHASE SUPPLY VOLTAGE 47 A 500 VAC

CARTE PROCESSEUR AUTOMATE V5 TSX47-40 LIAISON FIPIO/FIPWAY V5.6

CARTE PROCESSEUR AUTOMATE V4 TSX67-40 SANS LIAISON UNITELWAY

TSXPMXP107455 - PROCESSEUR DE RÉGULATION PMX 107-40

CARTE PROCESSEUR AUTOMATE V5 TSX107-40 LIAISON FIPIO/FIPWAY

CARTE PROCESSEUR AUTOMATE V5 TSX107-40 LIAISON FIPIO/FIPWAY

CARTE PROCESSEUR AUTOMATE V3 TSX 87-30

CARTE CPU AUTOMATE

MODICON TSX COMPACT PC-E984-258

MODICON TSX COMPACT PC-E984-258R