CPU

COMPACT PLC; 16DI; 16DO; 4AI; 1AO; 1HSC; RTC; 16KB EEPROM

GE FANUC - CENTRAL PROCESSOR UNIT - SERIE 90-70

TSX PREMIUM CPU TSX 57.30 V3 1024 E/S TOR 128 E/S ANALOG 32 VOIES MÉTIERS 64/80 K MOTS INTÉGRÉ 384 K MOTS MAXI SUR PCMCIA 3 RÉSEAUX 8 BUS AS-INTERFACE 1 BUS CANOPEN 2 BUS DE TERRAIN

PROCESSOR MODULE M340 - MAX 512 DISCRETE + 128 ANALOG I/O - MODBUS

MICROMASTER 440 SANS FILTRE 3 380-480 V CA+10/-10% 47-63HZ COUPLE CONSTANT 1;1KW SURCHARGE 150% 60S; 200% 3S COUPLE QUADRATIQUE 1;1KW 173X 73X 149 (HXLXP) INDICE DE PROTECTION IP20 TEMPÉRATURE AMBIANTE -10+50DEGC SANS AOP/BOP

SIMATIC S5; S5-95U COMPACT UNIT WITH 2 INTERFACES AS511

SIMATIC S5; CPU 942 F. S5-115U PLC RAM 10 KBYTES

CARTE PROCESSEUR RÉGULATION UNITELWAY

SIMATIC S5; CPU 943 FOR S5-115U PLC; RAM 48 KBYTES W. 1 PROGRAMMER PORT.

SIMATIC S7-300; CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; INTEGRATED 24V DC POWER SUPPLY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S5; CPU 103 F.S5-100U PC W.POWER SUPPLY UNIT 24V/9V DC W/O MANUAL

M1/M1E PROCESSOR ADAPTOR - 1 MODBUS; 1 I/O BUS - 32 MHZ

MICROMASTER 440 WITH BUILT-IN CLASS A FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 11 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 15 KW 245 X 185 X 195 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP

CONTROLLER PAC DRIVE MAX4 PROFIVE T5 INTEL PII 266 MHZ 32 RAM FLASH MEMORY 16 MB 8 AXES MASTER ENCODER EVALUATION 2 ANALOG INPUTS

SIMATIC WINAC SPARE PART FOR WINAC SLOT 416 V4 CPU416-2 PCI V4 PC BOARD ONLY W/O SW AND ACCESSORIES

CARTE CPU DE MODULE MARPOSS P7 N°884Y000527

SIMATIC S7-300 CPU 315-2 PN/DP; CENTRAL PROCESSING UNIT WITH 256 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; MICRO MEMORY CARD NECESSARY.

SIMATIC S7-400; CPU 412-1 CENTRAL PROCESSING UNIT WITH: MULTI-POINT MPI INTERFACE; 48 KB WORKING MEMORY

SIMATIC S7-300; CPU 314C-2DP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED DP INTERFACE; INTEGRATED 24V DC POWER SUPPLY; 64 KBYTE WORKING MEMORY; FRONT CONNECTOR ( X 40PIN) AND MICRO MEMORY CARD REQUIRED

SIMATIC S5; 927 CPU F.S5-150S;-150U CENTR.CONTOLL.

PLC-5/20 PROCESSOR; 16K WORD SRAM MAXIMUM USER MEMORY; MAXIMUM TOTAL I/O: 512 ANY MIX OR 512 IN + 512 OUT (COMPLEMENT); CHANNELS: 1 DH+; 1 DH+/REMOTE I/O; MAXIMUM NUMBER OF I/O CHASSIS: 13 (TOTAL) 12 (REMOTE); SERIES E

CPU QUANTUM 256K 1 MB+

CPU FOR 640 BASE I / O (MAX 20 UNITS). 0.1 MS / C BASIC INSTRUCTIONS; 20 KSTEPS RAM AND 32 WORDS DATA STORAGE

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART - CALIBRE 145A

MICROMASTER 420 SANS FILTRE MONO-/TRIPH. 200-240 V +10/-10% 47-63 HZ COUPLE CONSTANT 0;75 KW SURCHARGE 150 % POUR 60 S COUPLE QUADRATIQUE 0;75 KW 173 X 73 X 149 (H X L X P) DEGRE DE PROTECTION IP20 TEMPER. AMB. -10 A +50 DEG. C SANS AOP/BOP

SIMATIC S7-200; CPU 226 COMPACT UNIT; DC POWER SUPPLY 24 DI DC/16 DO DC; 8 KB CODE/5 KB DATA; 2 PPI/FREEPORT PORTS

SIMATIC S7-300; CPU 314C-2 PTP COMPACT CPU WITH MPI; 24 DI/16 DO; 4AI; 2AO; 1 PT100; 4 FAST COUNTERS (60 KHZ); INTEGRATED INTERFACE RS485; INTEGRATED 24V DC POWER SUPPLY; 96 KBYTE WORKING MEMORY; FRONT CONNECTOR (2 X 40PIN) AND MICRO MEMORY CARD REQUIRED

X20 CP 1485 PLC CPU MODULE CELERON 400 PROCESSOR 32MB POWERLINK

PROCESSEUR 57.50 UNY + FIPIO.

SIMATIC S7-200; CPU 226 COMPACT UNIT; DC POWER SUPPLY 24 DI DC/16 DO DC; 16/24 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS.

SIMATIC S5; CPU 942 F. S5-115U PLC RAM 10 KBYTES

UNITY HOT STANDBY PROCESSOR - 1 RACKS(6/8/12 SLOTS) - 4 COM MODULE PROCESSOR.

SINUMERIK 840D/DE BOX FOR ELECTRONIC CONTROL DEVICE NCU BOX FOR INSTALLATION OF NCU 561.2/.3/.4/.5 NCU 571/571.2/.3/.4/.5 NCU 572/572.2/.3/.4/.5 NCU 573.2/.3/.4/.5 WITH POWER UNIT; BATTERY AND FAN

TSX QUANTUM RIO HEAD-END ADAPTOR MODULE MODICON QUANTUM 2 CONNECTORS WITH REDUNDANT CABLE

DOUBLE-FORMAT PL7 PROCESSOR TRANSPARENT READY - 1360 MA ETHERNET TCP/IP RJ45 10/100 MBIT/S

CARTE PROCESSEUR V2-40KO POUR NUM750/760

SINUMERIK FM-NC/810D/DE/840D/DE MMC103 ) PENTIUM 133 MHZ; 32 MO D-RAM LANGUES: AL; AN; FR; IT; ES (SYS.EX: SINUMERIK 840D BS002).

CARTE UAL

SIMATIC S5; S5-95U COMPACT UNIT W. PROFIBUS-DP MASTER INTERFACE INCLUDING MASTER MODULE

ZE 300 PROCESSOR

SIMODRIVE 611-A FEED MODULE; 4/8 A; OPTION MAIN SPINDLE;ENHANCED INTERFACE

RACK NUM 1060 REF 205203603

CPU SEPRO PG 2010 SBC

DC DIVE FMV102 0.75 KW INPUT 220-240 VAC

MICROMASTER VECTOR MMV25 WITH BUILT IN CLASS A FILTER 1AC 208-240V +/-10% 50/60HZ CONSTANT TORQUE: 0.25 KW OVERLOAD 150% 60SEC; 200% 3SEC VARIABLE TORQUE: N/A 175 X 73 X 141 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C.

MICROMASTER JUNIOR MMJ12 120W CLASS A FILTER 230V 1 AC

MICROMASTER JUNIOR MMJ37 370W CLASS A FILTER 230V 1 AC

MICROMASTER MM300/3 UNFILTERED 3AC 380/500V +/-10% 50/60HZ CONSTANT TORQUE: 3.0 KW OVERLOAD 150% 60SEC VARIABLE TORQUE: N/A 184 X 149 X 172 MM (H X W X D) PROTECTION IP20 AMBIENT TEMPERATURE 0-50 DEG C

DIGIDRIVE SK 2.5M/TL - 1;5KW - 2HP

GJR5250500R0101 CPU 14 K FLASH EPROM 4 ANALOGUE INPUTS 12 BITS RESOLUTION 2 ANALOGUE OUTPUT 12 BITS RESOLUTION2 PROGRAMMABLE RS 232 PORT RS 485 SYSTEM BUS 24 VDC POWER SUPPLY

SYSMAC C20 16DI 12DO 24VDC 2A

SUPPLY 24VDC 16 INPUTS 14 RELAY OUTPUTS CPU RELAY OUTPUT COMPUTER INTERFACE; 2000 STEPS PROGRAM CAPACITY; 30 I/O PORTS

HONEYWELL ISSC IPC 620-15 PROCESSOR MODULE 2K 4K MEMORY; 512 I/O

A250 MODICON 1MB RAM - A250 CENTRAL CPU

SYSMAC PROGRAMMABLE CONTROLLER C200HS CPU01 6974 WORDS (IN MEMORY UNIT) POWER SUPPLY VOLTAGE 100-240VAC

SINUMERIK 840D/DE CNC-HARDWARE NCU 571.5; 400 MHZ; 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB; PLC 128 KB PREPARED FOR PROFIBUS DP; ACCORD. TO IEC 61508

NUM 720B 205201215 PUPITRE POUR FRAISEUSE

SCHLEICHER POSITIONING PROCESSOR MODULE USP 21

COTAS CT 3507 CPU BOARD

UNC632 UNIVERSAL NETWORK CONTROLLER

1SBP260010R1001 EXTENSIBLE CENTRAL UNIT WITH CS31 BUSWITH 8 ISOLATED INPUTS 24 V D.C. AND 6 INCORPORATED RELAY OUTPUTS250 V A.C. / 2 ARS232 OR RS485 INTERFACEFOR PROGRAMMING OR ASCII OR MODBUSÂCOMMUNICATION24 V D.C. POWER SUPPLY

UNIDRIVE 37 KW 70A 400VAC - UNI3405

MODULE OPÉRATEUR DE COMMUNICATION OU S055A

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART - CALIBRE 30A - 230/400VAC 50/60HZ.

CONTRÔLEUR ÉLECTRONIQUE. DIGISTART

H-702 ENHANCED CPU; 1280 POINTS; 0.9?S/COMMAND;RS-232C SERIAL PORT I/F; 15.7K STEPS RAM/EPROM; PID FUNCTIONALITY

CPU 180 BASIS FOR I / O (MAX. 3 EXP.). 1 X USB; 2 X SERIAL OPTION. MS 0.55 / K-BASISINSTR. 10K STEPS PROG. 32K WORDS AND DATA. 36 IN (6 INTERRUPT / 2 X 100 KHZ COUNTER). 24 IN A RELAY 2. 1 X 8 BIT ANALOG IN. 24 V DC POWER SUPPLY

PS316 EBE 223.1 PROCESSOR MODULE

SIROTEC RCM 3C/3S/1KC FROM SW03 6FX1110-7AG01 MASTER CPU SUBMODULE; 8 MHZ NEC.

UNITÉ CENTRALE + 3 COUPLEURS JBUS RS232

SIMATIC S5; CPU 947 CENTR.PROCESS.UNIT F.S5-155U PC MONOPROCESSOR

SIMATIC S7-1200; CPU 1212C; COMPACT CPU; AC/DC/RLY; ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0 - 10V DC; POWER SUPPLY: AC 85 - 264 V AC AT 47 - 63 HZ; PROGRAM/DATA MEMORY: 25 KB

SIMATIC S7-400; CPU 412-1 96 KB WORKING MEMORY (48 KB CODE; 48 KB DATA) INTERFACE MPI/DP 12 MBIT/S

SIMATIC S5; CPU 947R F. S5-155H PLC

SINUMERIK 840C/840CE NC CPU 486DX4 8MB RAM

SICOMP AMS-M006-A8 *KS:3-4 CPU WITH 8086; 8 MHZ; 6 HOLDERS F. MEMORY MODULES 1 V.24/V.28 INTERFACE AND 24 PARALLEL I/O LEADS

CARTE MII CPU BOARD GMI-CPU7M

S7-1500; CPU 1515-2 PN; CENTRAL PROCESSING UNIT WITH WORKING MEMORY 500 KB

SIMATIC S7-1500F; CPU 1515F-2 PN; CENTRAL PROCESSING UNIT WITH WORK MEMORY 750 KB FOR PROGRAM AND 3 MB FOR DATA; 1ST INTERFACE: PROFINET IRT WITH 2-PORT SWITCH; 2ND INTERFACE: PROFINET RT; 30 NS BIT PERFORMANCE; SIMATIC MEMORY CARD REQUIRED

MMC-SICOMP FM 486 FUNCTION MODULE FOR USE IN AS 950 (SIMATIC S5) W. 96PIN BASE CONNECTOR W/O DOCUMENTATION W. SOFTWARE (BD486; COMNET)

CARTE CPU VARIATEUR REFU 316

CARTE MICROPROCESSEUR  LB3971

POWERFUL CPU FOR THE X20 SYSTEM INTEL CELERON 400 PERFORMANCE WITH ADDITIONAL I/O PROCESSOR ETHERNET; POWERLINK AND USB ONBOARD

SIMATIC S7-300; CPU 317TF-2 DP; UNITÉ CENTRALE POUR TÂCHES D'AUTOMATISATION; TÂCHES TECHNOLOGIQUES ET DE SÉCURITÉ 1;5MO DE MÉMOIRE DE TRAVAIL; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP (DRIVE); INTÉGR. E/S POUR TECHNOLOGIE; CONNECTEUR FRONTAL (1X 40 PÔLES) ET MICROCARTE MÉMOIRE 8 MO NÉCESSAIRE

IC693CPU313 EMBEDDED CPU WITH A 5-SLOTTED BASEPLATE

IC693CPU313 EMBEDDED CPU WITH A 5-SLOTTED BASEPLATE

GE FANUC CPU 350 MODULE (32K BYTES USER MEMORY; 4K I/O; 8 RACKS); NO BUILT-IN SERIAL PORTS .22MSEC/PROCESSOR (32K BYTES USER MEMORY; 4K I/O; 8 RACKS)

2003 CPU; 100 KB SRAM; 256 KB FLASHPROM; 24 VDC; 7 W SUPPLY; 1 RS232 INTERFACE; 1 CAN INTERFACE

APRIL PB 80 UNITÉ CENTRALE 2K REPROM

MICROMASTER 420 UNFILTERED 3AC 380-480V 10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO 50 DEG C W/O AOP/BOP

CARTE CPU CYBER 4000 NN6601B

MICROMASTER 420 UNFILTERED 1/3AC 200-240V +10/-10% 47-63HZ CONSTANT TORQUE POWER 0.75 KW OVERLOAD 150% FOR 60S VARIABLE TORQUE POWER 0.75 KW 173 X 73 X 149 (H X W X D) PROTECTION IP20 AMBIENT TEMP -10 TO +50 DEG C W/O AOP/BOP

PROGRAMMABLE CONTROLLER SERIE PCA2 PCA2.M2

PCD4 SERIE PROCESSOR MODULE 16 MHZ

PS4 DIGITAL I/O COMPACT PLC

CENTRAL PROCESSING MODUL FOR AS 235 AND AS 235 K

S5-210 MICROCOMPUTER SYSTEM CENTRAL PROCESSING UNIT BIT PROCESSOR F.S5-210A.