catalog

HITACHI; FREQUENCY DRIVE; 3 PHASE; 200 TO 240 V

LONGLIFE DC TACHO-GENERATOR. 14 MM BLIND HOLLOW SHAFT. FLANGE MOUNT. TEMPERATURE COMPENSATION OF TACHO VOLTAGE AS STANDARD. OPEN CIRCUIT VOLTAGE 20MV/MIN PER RPM. HIGH SIGNAL QUALITY DUE TO PATENTED LONGLIFE TECHNOLOGY. LOW MOMENT OF INERTIA. NO AUXILIARY ENERGY SOURCE REQUIRED. PROTECTION CERTIFICATION OF DIN EN 60529 IP 55. TORQUE 1.5 NCM. HOUSING MATERIAL IS STAINLESS STEEL AND PLASTIC. THE SHAFT MATERIAL IS STAINLESS STEEL. OPERATING TEMPERATURE OF -30 TO +130 °C. RESISTANCE CERTIFICATION OF IEC 60068-2-6 FOR VIBRATION 10 G; 10-2000 HZ AND IEC 60068-2-27 FOR SHOCK 100 G; 6 MS. .

SINAMICS DCM DC CONVERTER FOR 4-QUADRANT DRIVES CIRCUIT (B6) A (B6) C INPUT: 400V 3AC; 104A CONTROLLABLE: ...

CARTE

SIMOTICS S-1FL6-1FL6 OPERATING VOLTAGE 3AC 400 V PN=1 KW; NN=2000 RPM M0=6 NM; MN=4.78 NM SHAFT HEIGHT 65 MM INCREMENTAL ENCODER TTL 2500 INCR./REV. PLAIN SHAFT; TOLERANCE N WITH HOLDING BRAKE DEGREE OF PROTECTION IP65 WITH SEALING RING COMPATIBLE WITH THE CONVERTERS SINAMICS V70 & V90

19" SXGA IND. MONITOR W/RESISTIVE TS (RS-232; USB)

CAISSES SOUS HOUSSE THERMO SOUDABLE AVEC SACHETS DE DÉSHYDRATANT

PUPITRE OPÉRATEUR SWAN

EMC FILTER FOR FIRST ENVIRONMENT TN (GROUNDED) SYSTEM; CATEGORY C2. NOT AVAILABLE FOR UNITS WITH RATED CURRENT ICONT.MAX ABOVE 1000 A.

MENTOR II DC DRIVE 155 A REGEN MODEL 56KW THREE PHASE INPUT (208-460 VAC) DC ARM OUTPUT (240-500 VDC) FIELD OUTPUT (150-300 VDC) .

- ARBRE CREUX NON TRAVERSANT - DIAMÈTRE DE L'ARBRE : 15MM -INTERFACE TTL -PLAGE DE TENSION : 4.5...5.5V -MODE DE RACCORDEMENT : CÂBLE 8 FILS 1.5M -IMPULSIONS PAR TOUR : 2048

CODEUR INCRÉMENTAL PROGRAMMABLE DFS60 SORTIE DE SIGNAUX PROGRAMMABLE TENSION D'ALIMENTATION PROGRAMMABLE RÉSOLUTION PROGRAMMABLE SORTIE CÂBLE 8 FILS  1.5M ARBRE CREUX NON TRAVERSANT DIAMÈTRE 15MM

KIT DE CONTACTS MALES ET FEMELLES 0;5MM CARRE

LOGO!POWER 5 V / 6;3 A ALIMENTATION STABILISÉE ENTRÉE : 100-240 V CA SORTIE : 5 V CC / 6;3 A

POSITION DE MONTAGE AVANT INTENSITÉ NOMINALE : 6 A ACCEPTE DES CÂBLES JUSQU'À 2 X 2;5 MM2 1 X BLOC PAR CONTACTEUR; 1 X BLOC PAR RELAIS

SERVOMOTOR SENZA FRENO E CON ENCODER INCREMENTALE

SERVOMOTOR CON FRENO E CON ENCODER INCREMENTALE

SERVOMOTOR SENZA FRENO E CON ENCODERINCREMENTALE

SERVOMOTOR SENZA FRENO E CON ENCODER INCREMENTALE

PANELVIEW PLUS 600 COLOR TFT TERMINAL 5.5-INCH; KEYPAD; ETHERNET; RS-232 AND MODULAR COMMUNICATION INTERFACE; 64MB RAM; 64MB FLASH; AC POWER SERIE A

ELECTRONIC MODULE ANALOGUE INPUTS AND OUTPUTS; WITH STANDARD FUNCTION; 2 INPUTS: 0 & 10 V; -10 & 10 V.

ELECTRONIC MODULE DIGITAL INPUTS AND OUTPUTS; WITH FAILSAFE FUNCTION; 4 OUTPUTS 1-POLE (0.5 A); EXP. TEMPERATURE. PSSU E F 4DO 0.5-T

PNOZSIGMA SAFETY RELAY (STANDALONE). INPUTS: SINGLE-CHANNEL WIRING. OUTPUTS: 3 N/O; 1 N/C (T = 0 - 300 S). UB 24 V DC; WIDTH: 17.5 MM; PLUG-IN SPRING-LOADED TERMINALS. CONTACT BLOCK AND TIMER FOR CONTACT EXPANSION IN CONNECTION WITH SAFETY-RELATED CONTROL COMPONENTS OR SEQUENCE OF A SAFETY-RELATED TIME FUNCTION (DELAY-ON ENERGISATION; DELAY-ON DE-ENERGISATION; PULSING).

RESOLVER MULTI-POLE (RESOLVER P=3) WITH DRIVE-CLIQ INTERFACE; SHAFT WITH FITTED KEY; TOLERANCE N; W/O HOLDING BRAKE DEGREE OF PROTECTION IP64; PAINT FINISH RAL7016

CARTE

MODULE D'INTERFACE POUR 16 VOIES À RELAIS; CONNEXION VISSÉE

CÂBLES POUR ORDINATEUR SCSI 2 CABLE 68 PIN; 2M; GREY

KIT DE DÉMARRAGE DE BASE LOGO!+KTP700 LOGO! 12/24RCE; HMI KTP700 BASIC; LOGO! POWER 24V 1;3A; LOGO! SOFT COMFORT V8; WINCC BASIC; MATÉRIEL D'INFORMATION; DANS SYSTAINER ECCN:EAR99H

CARTE

SDCS-CON2B-21-COAT; SDCS-CON2B-21 CONTROL BOARD; COATED

CARTE MÈRE PC HP FXN1 EN SOCKET 1155

SIMATIC PC RI45; INDUSTRIAL PC 19" RACK IPC; PENTIUM 166 MHZ 16 MB RAM;256KB 2ND LEVEL CACHE 3.5"FDD; 1.6GB HDD; MS-DOS 6.22 SVGA GRAPHICS CIRRUS GD7543 AM PCI BUS WITH 1 MB RAM; 1024X768 PIXELS; 256 COLORS INTERFACES COM1/2; LPT1; VGA MPI; PS/2 KEYBOARD; PS/2 MOUSE SAVECARD MOD. WITH SW DRIVER 115/220 VAC / 220 VA SV; 5 ISA / 2 PCI SLOTS FREE 2X3.5" / 2X5.25" FREE SLOTS; FRONT IP41 USER GUIDE DE/EN/FR/IT

SIMATIC PC RI 45 PIII; SPECIAL CONFIGURATION; MATROX MILLENIUM G200; 8 MBYTE (AGP GRAFIK); MPI/PROFIBUS DP; 12 MBITS; CD-ROM 40 X; ATAPI-S5; 10/100 MBITS ETHERNET RJ45 USB; WATCHDOG; TEMP. MONITORING; RELAY INTEGRATED SOUND; PROCESSOR: PENTIUM III 800 MHZ; INCL.256 KBYTE 2ND LEVEL CACHE; 10.2 GBYTE HDD EIDE; MEMORY: 128 MBYTE RAM (1X128 MBYTE SDRAM); EXTENSION 1: FLOPPY DRIVE; 1.44 MBYTE 3.5"; NATIONAL VERSION: EUROPE (PRESET 230 V; EURO POWER CABLE); OPERATING SYSTEM: WINDOWS 98 SE; ENGLISH; WITHOUT EXPANSIONS 2

ECRAN 5.7" 320×240 KCS057QV1BH-G20

POWER SUPPLY; MEDICAL; AC-DC; 5V 6A

DÉTECTEUR DE FUMÉE MULTICAPTEUR S-LINE PROTOCOLE COLLECTIF ET FDNET FDOOT241-A9

HG2-6300P 300W 90-240VAC 20-PIN ACTIVE PFC ATX POWER SUPPLY UNIT

VENTILATEUR DE CONDUIT; 390/560 M3/H; 3 VITESSES; RACCORDEMENT D 160 MM

EYR 203: UNIVERSAL CONTROLLER MODUFLEX FOR REGULATION AND CONTROL 18 INPUTS 10 OUTPUTS 24 VAC

THYRISTOR BLOCK OF LAYER A WITH SNUBBER CIRCUIT INFEED/REGENERATIVE FEEDBACK UNITS 821 A; 380-460 V AC 3; 50/60 HZ

SH100/40080/0/1/00/00/10/00/00

SIMOTICS S-1FL6 OPERATING VOLTAGE 3AC 400 V PN=0.75 KW; NN=3000 RPM M0=3.5 NM; MN=2.39 NM SHAFT HEIGHT 45 MM ABSOLUTE ENCODER 20 BIT (12-BIT MULTI-TURN) PLAIN SHAFT; TOLERANCE N WITHOUT HOLDING BRAKE DEGREE OF PROTECTION IP65 WITH SEALING RING COMPATIBLE WITH THE CONVERTERS SINAMICS V70 & V90

CARTE D'ACQUISITION POUR CHAÎNE TACHYMÉTRIQUE

BOÎTIER À EMBOUTS PLEXO COMPOSABLE GRIS - 2 POSTES HORIZONTAUX

OEM IPC PC 677C 15.1" COLOR TFT DISPLAY; TOUCH+KEY FUNCTION; WITHOUT FRONT USB;WITHOUT PIEZO MOUSE; WITHOUT S KEYS; WITH TOUCH PEN AND HOLDER; WINDOWS XP PROF. SP3; MUI BASIC: 6AV7893-1BB10-1AB0

S10 0/100B 4-20MA 10/30VDC G1/2 TRANSMETTEUR DE PRESSION TYPE S-10 POUR APPLICATIONS GÉNÉRALES SPÉCIFICATIONS SELON FICHE TECHNIQUE: PE 81.01 ALIMENTATION ÉLECTRIQUE: DC 10 (14) ... 30 V MATÉRIAU EN CONTACT AVEC LE FLUIDE: ACIER INOX BOÎTIER: ACIER INOX SIGNAL DE SORTIE: 4 ... 20 MA; 2 FILS ETENDUE DE MESURE: 0 BAR ... 100 BAR RACCORDEMENT PROCESS: G 1/2 B PRÉCISION: 0;25% DE L'EM RACCORDEMENT ÉLECTRIQUE: CONNECTEUR COUDÉ 4 PLOTS SELON DIN EN 175301-803 PLAGE DE TEMPÉRATURE DU FLUIDE: -30 ... +100 °C (-22 ... +212 °F) ALIMENTATION: 10...30 V DC AFFECTATION DES BORNES DE SORTIE: UB=1; 0V=2 DOCUMENTATION D'IMPORTATION POUR LES PAYS DE LA CEI: SANS

PUPITRE NUM 1040/1060

SINUMERIK 810D/840D I/O LINK VIA PROFIBUS DP; SOFTWARE OPTION CERTIFICATE OF LICENSE ONLY

CARTE

QUALITROL INDICATEUR DE CIRCULATION 092-300-01

SIMOVERT MASTERDRIVES DU/DT-FILTER 3 380-460V AC; 34A 3 500-575V AC; 34A

ALIMENTATIONS ÉLECTRIQUES DE LABORATOIRE 0-10VOUT 0-20A 200W; LAN; US CORD

SIMOTICS S MOTEUR SYNCHRONE 1FK7-CT PN=4;9KW; UCI=600V M0=27NM (100K); NN=3000TR/MIN; À REFROIDISSEMENT PAR CONVECTION NATURELLE MODÈLE IMB 5 (IM V1; IM V3) BRIDE 1 CONNECTEUR DE PUISSANCE ORIENTABLE CODEUR ABSOLU 20 BITS + MULTITOUR 12 BITS AVEC INTERFACE DRIVE-CLIQ (ENCODEUR AM20DQI) ARBRE LISSE; TOLÉRANCE N SANS FREIN À L'ARRÊT INDICE DE PROTECTION IP64

6AV7885-5AK21-1GD1

SSIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" TOUCH; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CELERON P4505

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 12" TOUCH; 800X 600 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I7-610

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 24 V DC POWER SUPPLY CORE I7-610E

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WIT

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" TOUCH; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WIT

SIMATIC HMI IPC677C 2X10/100/1000 MBIT/S ETHERNET; 4XUSB V2.0; 1 X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN CONTROL; RAID-CONTROLLER ON BOARD; 15" TOUCH; 1024 X 768; WITHOUT FRONT SIDE USB INTERFACE; AC110/230V POWER SUPP. W. MAMUR POWER CABLE

CARTE

CARTE

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 15" KEY; 1024X 768 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT WITH

MITSUBISHI E1071 TOUCHSCREEN OPERATOR PANEL INTERFACE

6AV7894-0AD30-1AC0

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNE...

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 19" TOUCH; 1280X 1024 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT

SIMATIC HMI IPC677C (PANEL PC); 2X10/100/1000 MBIT/S ETHERNET; 4 X USB V2.0; 1X SERIAL (COM1); WATCHDOG; TEMPERATURE AND FAN MONITORING; RAID CONTROLLER ONBOARD; 19" TOUCH; 1280X 1024 WITH FRONT-SIDE USB-SCHNITTSTELLE 110/230 V AC POWER SUPPLY UNIT

MOTOR 7;4NM 5;5A 3000TR/MIN IP67

SINUMERIK 820T MACHINE CONTROL PANEL AXIS SELECT.: X; Z; Q1; Q2

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CELERON M 1.2 GHZ; PROFINET(IE); 2 X 1 GBIT; 2 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED; 50 GB SOLID STATE

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024X 768; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CELERON M 1.2 GHZ; PROFINET (IE); 2X 1 GBIT; PROFIBUS DP 12 1 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED 50 GB

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" TOUCH DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE2DUO 1.2 GHZ; PROFINET(IE); 2 X 1GBIT; PROFIBUS DP 12; 1 GB -RAM; DDR3; 2. CF-SLOT NOT EQUIPPED;

SIMATIC HMI IPC477C; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT W. USB INTERFACE INTEL CORE2DUO 1.2 GHZ; 4 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 8 G

SIMATIC HMI IPC477C; 15" TOUCH DISPLAY; 1024X768; STANDARD FRONT W. USB INTERFACE INTEL CORE2DUO 1.2 GHZ; 4 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 32 G

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 15" KEY DISPLAY; 1024 X 768; 4 USB (BACK) + 1 USB (FRONT); STANDARD FRONT; CORE2DUO 1.2 GHZ; PROFINET(IE); 1 X 1GBIT; PROFINET(IRT) 3 PORTS; (SOFTWARE BUNDLES ON REQUEST) 4 GB -RAM

BLOC DE CONTACTS AUXILIAIRES; 31; 3 NO + 1 NF EN 50012 4 PÔLES; BORNE À VIS; POUR CONTACTEURS MOTEURS; TAILLES S0 ... S12;

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND CF SLOT NOT EQUIPPED CF CARD: 4 GB WINDOWS EMBEDDED STANDARD 2009 PRE-INSTALLED WINCC FLEXIBLE RT 4096 PT (INCL. ARCHIVES AND RECIPES)

SIMATIC HMI IPC477C; 19" TOUCH DISPLAY; 1280X1024; STANDARD FRONT W. USB INTERFACE INTEL CORE2DUO 1.2 GHZ; 4 GB SDRAM (DDR3); 2 X ETHERNET 1 GBIT/S; 1 X PROFIBUS DP12; 4 X USB 2.0; 500MA; 1 X RS232 (COM1); POWER SUPPLY DC 24V; 1 X FREE CF-SLOTS; 32

SIMATIC HMI IPC 477C OPTIONAL BUNDLE WITH WINCC FLEXIBLE 2008/WINAC; 19" TOUCH DISPLAY; 1280X 1024; 4 USB (BACK)+1 USB (FRONT) STANDARD FRONT CORE 2 DUO 1.2 GHZ; PROFINET (IE); 1X 1 GBIT; PROFINET (IRT) 3 PORTS; (SOFTWARE BUNDLES ON REQUEST) 4 GB -RA

SIMATIC HMI IPC 577C PCI-SLOT; 4 USB (BACK) + 1 USB (FRONT); ETHERNET (10/100/1000); 15" KEY DISPLAY; ; CORE2DUO 1.86 GHZ; PROFINET(IE); 2 X 1 GBIT; 4 GB -RAM; DDR3; 2. MASS STORAGE: NOT EQUIPPED; 1. MASS STORAGE: (OPERATING SYTEM OPTIONAL): 320 GB H

SIMATIC HMI IPC 577C PCI SLOT; 4 USB (BACK)+1 USB (FRONT); ETHERNET (10/100/1000); 19" TOUCH DISPLAY ; CORE 2 DUO 1.86 GHZ; PROFINET (IE); 2X 1 GBIT 2 GB -RAM; DDR3; 2ND MASS STORAGE: NOT EQUIPPED 1ST MASS STORAGE (OPERATING SYSTEM OPTIONAL): 320 GB

VICKERS ELECTRICS MODEL 70 DBC III- F7;5. 220VAC; 1.7KW; 7.5AMP; 24VDC

CPU INCL. 8 KB (4 KWORD) FLASH MEMORY AND 2.5 KW DATA MORIES; FEED 24 VDC WITH 8 IN NPN / PNP 24 VDC AND 4 OFF TRANSISTOR PNP TRANSISTOR 300 MA 24 VDC; 2 ANALYSIS IN (0-5; 0-10 V) ; 1 ANALOG OUT (0-10; -10-10V); 1 PT100 IN; 2 EXTENSION MODULES POSSIB

DISQUE DUR EXTERNE USB 3.0; 4 TO; NOIR

MITSUBISHI MDS-A-SP-260 VARIATEUR DE BROCHE CNC 15 KW

MONITEUR IIYAMA 27" *GB2730QSU-B1* HP/HDMI/DVI NOIR 1MS ANGLE DE VISION H/V : 178°/160° FRÉQUENCE DE BALAYAGE H : 89 KHZ

TWO-COLOUR PYROMETER; ARDOCOL MPZ; PZ40AF1; MEASURING RANGE 700-1600 CEL; DISTANCE RATIO 80:1; 0.4M- INFINITE; STANDARD OPTIC

TIROIR À VENTILATEUR RH28 CONFORMITÉ CE; OPTION U92;

CARTOUCHE FUSIBLE FNQ-R-5; 5A; 600V

CARTE ADAPTATION POTENTIOMÈTRE 4-20MA

CPU 215 - PLC CPU DC 24V; 96/144KBYTE WORK/LOAD MEMORY; MP?I; MMC SLOT; REAL-TIME CLOCK

SINUMERIK (ACCESSOIRES) CABLE 4 FILS POUR APPAREILS PERIPH.; L = 5 M

CONTROLLOGIX ANALOG OUTPUT MODULE; CURRENT/VOLTAGE; 8 POINTS (20 PIN); SERIES A

SIMATIC C7-613/C7-635/C7-636; PERIPHERALS SET FOR 2 MODULES FLAT VERSION