catalog

SIMOTICS S SERVOMOTEUR SYNCHRONE 1FK7 COMPACT; 48NM 100K; 2000TR/MIN; 7;75KW À REFROIDISSEMENT PAR CONVECTION NATURELLE IM B5 (V1; V3) CONNECTEUR DE PUISSANCE / DE SIGNAUX CONNECTEURS ORIENTABLES À 270° RÉSOLVEUR MULTIPOLAIRE (RÉSOLVEUR P=4) AVEC INTERFACE DRIVE-CLIQ ARBRE AVEC CLAVETTE; TOLÉRANCE N AVEC FREIN DE MAINTIEN INDICE DE PROTECTION IP64; PEINTURE RAL7016

CONTACTEUR DE PUISSANCE; AC-3 : 12 A; 5;5 KW / 400 V 1 NO; AC 220 V; 50/60 HZ 3 PÔLES; TAILLE S00 BORNE À VIS

SINAMICS DCM DC CONVERTER FOR FOUR-QUADRANT DRIVES CONNECTION (B6) A (B6) C INPUT: 3-PHASE AC 400V; 174A CONTROLLABLE FIELD RECTIFIER D420/210 MREQ-GEGF6V62 OUTPUT: DC 420V; 210A

SINAMICS G120 POWER MODULE PM230 NON FILTRÉ INDICE DE PROTECTION IP20 3 380-480 V CA+10/-10% 47-63HZ PUISSANCE FAIBLE SURCHARGE: 11 KW À 150% 3S; 110% 57S; 100% 240S; TEMPÉRATURE AMBIANTE 0 À +40 °C (LO) 355X 140X 165 (H X L X P) FSC SANS CONTROL UNIT ET UNITÉ DE COMMANDE VALIDÉ POUR CU240B/E-2 ET CU230P-2 À PARTIR DE LA VERSION DE FIRMWARE V4.4

SIMATIC DP; 5 MODULES ÉLECTRONIQUES; ET 200S: 2 RELAIS PAR MODULE; CONTACTS INVERSEURS À SÉPARATION GALVANIQUE; 24V-48V CC/5A; 24V-230V CA/5A; LARGEUR DE CONSTRUCTION 15MM; SORTIE DE LA VALEUR DE REMPLACEMENT COLISAGE = 5 UNITÉS

COMMUTATEUR OPTIQUE À FOURCHE; VISHAY; TCST2202

ÉCRAN TACTILE HMI; 12;1 POUCES DE LARGE; LCD TFT; COULEUR 24 BITS; RÉSOLUTION 1 280 X 800; COULEUR DU CADRE : NOIR

MOTEUR FRSDM A PATTES CARC:200L 18;5KW 1 | 000TR/MN 230/400V FREIN FAP180 230/400V | -240NM B3

DSS2.1M PLUGIN MODULE SERCOS INTERFACE

8502-BI-DP| MTL INSTRUMENTS | BUS INTERFACE MODULE (BIM) 4 I/O MODULES; PROFIBUS PROTOCOL

CONTACT FEMELLE À SERTIR D:8 125A 690V

VARIATEUR DE FRÉQUENCE ALLEN BRADLEY POWERFLEX 523; 0;4 KW 230 V C.A. 1 PHASE; 2;5 A

BOÎTE DE CONTRÔLE GAZ

FLOW SENSORS AMPLIFIER · SERIES 400 230V

SIMOTICS S SYNCHRONOUS SERVO MOTOR 1FK7 COMPACT; 1.6NM 100K; 6000RPM; 0.63KW NATURALLY COOLED POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270° RESOLVER MULTI-POLE WITH DRIVE-CLIQ INTERFACE; SHAFT WITH FITTED KEY; TOLERANCE N; W/O HOLDING BRAKE DEGREE OF PROTECTION IP64

CARTE LA16X - 16 ABONNÉS ANALOGIQUES AASTRA MATRA NEXSPAN

CONTRÔLEURS AND ELEMENT

IE CONNECTING CABLE RJ45; 4X2; 3 M IE CONNECTING CABLE RJ45; 4X2; 3 M

MOTEUR AUTOSYNCHRONE COUPLE 6.4NM MOTEUR SERIE COURTE TENS 700V PUIS 1;6KW T/MN 2400 FIXATION PAR BRIDE CARREE 115MM CENTRAGE 130MM ARBRE DIAM. 27MM AVEC CLAVETTE COURANT PERMANENT 3.87A AVEC FREIN DE MAINTIEN

UNIMOTOR; 142U3;460V;12.8NM;3KRPM M

SITRANS FM MAG 1100 F FULL-BORE ELECTROMAGNETIC FLOW SENSOR; SANITARY DESIGN; DIAMETER DN 10 TO DN 100 (3/8" TO 4"). SUITABLE FOR VOLUME FLOW MEASUREMENT OF LIQUIDS (CONDUCTIVE) ; FOR APPLICATIONS IN F&B; PHARMACEUTICAL INDUSTRY. . DN100; 4 INCH NONE (NOT 3A APPROVED) PFA (NO ATEX) EPDM (FDA) ELECTRODE MATERIAL: HASTELLOY C SENSOR FOR REMOTE TRANSMITTER (ORDER TRANSMITTER SEPARATELY)- 3A APPROVED NO BUS COMMUNICATION METRIC POLYAMID TERMINAL BOX (3A) OR 6000 I COMPACT.

VARIATEUR DE FRÉQUENCE REF NXL00045C5H1SSS0000

SIMOVERT MASTERDRIVES VECTOR CONTROL ONDULEUR FORME COMPACTE; IP20 675-810 V CC; 46;5 A PUISSANCE DE TYPE: 30 KW DOCUMENTATION SUR CD OPTION Z=

MOTOR SYNCHRONOUS SIMOTICS S SIMOTICS S-1FK7 SYNCHRONOUS MOTOR 1FK7-CT PN=0;82 KW; UZK=600V M0=3NM (100K); NN=3000RPM; NATURAL AIR COOLING;

DC590+ DRV DC DIGITAL DRIVE 4 Q 110 AMP INPUT 3 PH 220 TO 500V (±10%) 50/60HZ ENCODER (WIRE-ENDED) AUXILIARY MAINS POWER SUPPLY 110 VAC

SERVOMOTEUR SIGMA-5 300 W; COUPLE NOMINAL 0;955 NM; COUPLE DE POINTE 2;86 NM; 40

MOTEUR SYNCHRONE SIMOTICS S 1FK7-CT PN=1;5KW ; UCI=600V M0=6NM (100K) ; NN=3000TR/MIN ; À REFROIDISSEMENT PAR CONVECTION NATURELLE; FORME DE CONSTRUCTION IMB 5 (IM V1; IM V3) BRIDE 1 CONNECTEUR DE PUISSANCE ORIENTABLE CODEUR ABSOLU 24 BITS +12 BITS MULTITOUR AVEC INTERFACE DRIVE-CLIQ (ENCODEUR AM24DQI) ARBRE AVEC CLAVETTE; TOLÉRANCE N AVEC FREIN À L'ARRÊT INDICE DE PROTECTION IP64

PHOENIX CONTACT IB IL AO 2-U-BP-PAC MODULE DE SORTIE ANALOGIQUE; SORTIES ANALOGIQUES: 2; 0 V ... 10 V; -10 V ... 10 V; CONNECTIQUE: 2 FILS; VITESSE DE TRANSMISSION DANS LE BUS LOCAL: 500 KBIT/S; INDICE DE PROTECTION: IP20; AVEC INLINE CONTACTS ET PORTE-ÉTIQUETTE

MODULE D'EXTENSION PNOZ MA1P 2 ENTREES ANALOGIQUES - PILZ

DVP-S I/O MODULE; 4AI/2AO ANALOG

SIMOTICS S SYNCHRONOUS SERVO MOTOR 1FK7 COMPACT; 11NM 100K; 4500RPM; 1.41KW NATURALLY COOLED IM B5 (IM V1; IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270° INCREMENTAL ENCODER 2048 P/REV (ENCODER I-2048) WITH DRIVE-CLIQ INTERFACE; PLAIN SHAFT; TOLERANCE N; W/O HOLDING BRAKE DEGREE OF PROTECTION IP64

TECHNIQUE DE FIXATION UNITÉ D'AJUSTEMENT POUR DX100; Y COMPRIS MATÉRIEL DE FIXATION

BARRIÈRE ÉMETTRICE ET RÉCEPTRICE TELCO

SIPLUS S7-1200 CM1241 WITH CONFORMAL COATING BASED ON 6ES7241-1CH32-0XB0 . COMMUNICATION MODULE CM 1241; RS422/485; 9-POLE D-SUB (PIN) SUPPORTS FREEPORT

RÉFLÉCHISSANT PHOTOÉLECTRIQUE COMMUTATEUR CAPTEUR 2 M 30 V

ASEA DSCL 100A REDUNDANCY CONTROL UNIT ID: TES57310001-KY

POWER SUPPLY 6EV NON-STABILIZED POWER SUPP. UNIT +24V/10A 220V; 380V 3PH

MITSUBISHI 100A - TRANSISTOR MODULE FOR MEDIUM POWER SWITCHING USE; INSULATED TYPE

SIMATIC C1 PCB;1 SPS 11 THREE-INPUT OR GATES

CRAMPON TERMINAL À MONTAGE RAPIDE; POUR PROFILÉ NS 35/7;5 OU NS 35/15; AVEC POSSIBILITÉ DE REPÉRAGE; POSSIBILITÉ DE MONTAGE POUR FBS...5; FBS...6; KSS 5; KSS 6; LARGEUR : 5;15 MM; COLORIS : GRIS

PROTECTION À TEMPS INVERSE BOÎTIER 1/6 19; 4 X I; 3 ENTRÉES TOR; 5 BA (2 CONTACTS INVERSEURS); 1 CONTACT LIVE; ENTRÉES DE MESURE: IPH = 1 A/5 A; IE = 1 A/5 A; TENSION AUXILIAIRE : 60 À 250V CC;115 V CA; 230V CA BOÎTIER ENCASTRÉ; BORNES À VIS MONDE; CEI / ANSI; LANGUE : ANGLAIS (MODIFIABLE); FILM FRONTAL STANDARD; INTERFACE SYSTÈME PORT B (FACE INFÉRIEURE DE L'APPAREIL; À L'ARRIÈRE) ESCLAVE PROFIBUS DP; RS485 ÉLECT. SANS INTERFACE SYSTÈME PORT A MESURE : PERTURBOGRAPHIE; FONCTIONNALITÉ : VERSION DE BASE; SANS AWE; SANS LOCALISATEUR D'ERREURS

CONTACTEUR AUXILIAIRE TYPE KC 31E 24V-DC RÉF 50571

8.2 VDC; PROXIMITY SWITCH; LINE MONITORING; SIL 3

POWER CABLE PRE-ASSEMBLED TYPE: 6FX5002-5DS01 (1FT/1FK/1PH FOR SINAMICS) 4X 1.5+(2X1.5) C CONNECTOR SZ. 1/1.5 MM2 UL/CSA DESINA MOTION-CONNECT 500 DMAX=13.1 MM; LENGTH (M)= 0 + 10 + 0 + 0

CONTRÔLEUR DE NIVEAU DE LIQUIDE; SÉRIE K8AK-LS; CONDUCTEUR; SPDT; 100 À 240 VAC; 4.6 VA; 10 S

AMPLIFICATEUR 2 VOIES POUR BARRIÈRE IMMATÉRIELLE

131B0522 DANFOSS DRIVES VLT AUTOMATION DRIVE FC 300 2.2 KW / 3.0 HP; 380-500 VAC; IP20 / CHASSIS; RFI CLASS

SLC 500 16-CH FAST RESPONSE 24VDC SOURCING INPUT MODULE

POWER ENTRY MODULE WITH GENERAL PURPOSE RFI FILTER; 5AMP; .110 TERMINALS

ZELIO CONTROL; ORDRE ET ABSENCE DE PHASE; TRIPHASÉ; 208-480VAC

FLEX EX I/O RTD/THERMOCOUPLE/MV INPUT MODULE; 8-POINT; 16 BIT; SINGLE-ENDED; NON-ISOLATED; 4-WIRE RTD; THERMOCOUPLE AND MILLIVOLT INPUT MODULE CAN CONNECT THERMOCOUPLES; (2-; 3-; 4-WIRE) RTDS; STRAIN

ALTIVAR - UNITÉ DE FREINAGE SUR RÉSEAU - 200KW - 400V

ALIMENTATION DE LABORATOIRE RACKABLE 19'' RÉGLABLE PROGRAMMABLE RS-232/RS-485 ENSION D'ENTRÉE : 85-265 VAC |47-63 HZ PLAGE DE TENSION SORTIE : 0 - 20 V/DC PLAGE DE COURANT : 0 - 20 V/DC / 0 - 76 A ENTRÉE 85 - 265 V/AC

SINUMERIK TABLEAU DE COMMANDE MACHINE MCP 429C-M IE ERGOLINE; LARGEUR 429 MM; TOUCHES MECHANIQUES; MARCHE RAPIDE ET CORRECTION D'AVANCE; SOURIS

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 3RT1045-1AK60.The equipment alternative reference is : 3RT10451AK60. This product comes from the SIRIUS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by MARPOSS and commercialized under the reference 6840040426/D.The equipment alternative reference is : 6840040426D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by PEPPERL+FUCHS and commercialized under the reference 3RG4023-3AG33.The equipment alternative reference is : 3RG40233AG33. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Boitier is manufactured by ALSTHOM and commercialized under the reference TUG0212. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by FESTO and commercialized under the reference KRES-AC-5.The equipment alternative reference is : KRESAC5. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Carte is manufactured by CENTRALP and commercialized under the reference CARTE ARRET.The equipment alternative reference is : CARTEARRET. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by PARKER and commercialized under the reference 650V-43145020-B01P00-F2.The equipment alternative reference is : 650V43145020B01P00F2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by SIEMENS and commercialized under the reference 6SE7027-7TD84-1HG0.The equipment alternative reference is : 6SE70277TD841HG0. This product comes from the SIMOVERT MASTERDRIVES range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by WEIDMULLER and commercialized under the reference 1315170000. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by FUJI and commercialized under the reference PUM-E.The equipment alternative reference is : PUME. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by _GENERIQUE and commercialized under the reference E6. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Ecran is manufactured by PROFACE and commercialized under the reference PFXXM4200TP. This product comes from the LT 4000 SERIE range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference CS1WCN323. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

VLT 5000 VARIABLE SPEED DRIVE 5.5 KVA

The equipment with type Accessoires is manufactured by PEPPERL+FUCHS and commercialized under the reference IS RPI RS D2.The equipment alternative reference is : ISRPIRSD2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by ABB and commercialized under the reference CM-MPS.23S.The equipment alternative reference is : CMMPS23S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference FC-302N250T5E20H4BGR7XXSXXXXAXBXCXXXXDX.The equipment alternative reference is : FC302N250T5E20H4BGR7XXSXXXXAXBXCXXXXDX. This product comes from the FC 300 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by BENTLY NEVADA and commercialized under the reference 3500-40M.The equipment alternative reference is : 350040M. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by NUM and commercialized under the reference FS 201 745 C.The equipment alternative reference is : FS201745C. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by SIEMENS and commercialized under the reference 6SL3210-1NE11-7AG1.The equipment alternative reference is : 6SL32101NE117AG1. This product comes from the SINAMICS G120 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by ADDER and commercialized under the reference ADDER X50 REMOTE.The equipment alternative reference is : ADDERX50REMOTE. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by VEEDER-ROOT and commercialized under the reference 791506711. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 3RQ3018-1AB00.The equipment alternative reference is : 3RQ30181AB00. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Pupitre opérateur is manufactured by PROFACE and commercialized under the reference GP3000H-CBLSD.The equipment alternative reference is : GP3000HCBLSD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by NUM and commercialized under the reference FC 200 202 221.The equipment alternative reference is : FC200202221. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by EUROTHERM and commercialized under the reference 815STCLGCCTRIDHDDLDNONENONES010100CNONODINSN. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by ALLEN BRADLEY and commercialized under the reference 171CX2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 6FX5002-2DC42-1AA5.The equipment alternative reference is : 6FX50022DC421AA5. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by ABB and commercialized under the reference SACE08RE44. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Ecran is manufactured by ELO and commercialized under the reference ET1790L. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference NX-AD2204.The equipment alternative reference is : NXAD2204. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference NX102-1120.The equipment alternative reference is : NX1021120. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by LENZE and commercialized under the reference Z351CBARBAG215FA8S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by ALSTHOM and commercialized under the reference SCA216A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by FANUC and commercialized under the reference A06B-0272-B400.The equipment alternative reference is : A06B0272B400. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by OMRON and commercialized under the reference ZFVSR10. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by CONTROL TECHNIQUES and commercialized under the reference EP206-P00-ENR0.The equipment alternative reference is : EP206P00ENR0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by ABB and commercialized under the reference 2TLA010025R0000. This product comes from the JSBRT11 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by B & R and commercialized under the reference 80VD100PD.C188.01.The equipment alternative reference is : 80VD100PDC18801. This product comes from the ACOPOS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 6SL3054-4EB00-0AA0.The equipment alternative reference is : 6SL30544EB000AA0. This product comes from the SINAMICS S110 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by SCHNEIDER ELECTRIC and commercialized under the reference BMH1403P21F1A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by SIEMENS and commercialized under the reference V23154D 0720-C410.The equipment alternative reference is : V23154D0720C410. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88M-1M10030T-S2.The equipment alternative reference is : R88M1M10030TS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

SIMOTICS S-1FL6 OPERATING VOLTAGE 230 V 3AC PN=1.5 KW; NN=3000 RPM M0=4.78 NM; MN=4.78 NM SHAFT HE 50 MM WITH ANGLE PLUG ENCODER ABSOLUTE SINGLE-TURN 21-BIT PLAIN SHAFT TOLERANCE N WITH HOLDING BRAKE; DEGREE OF PROTEC SEALING RING COMPATIBLE WITH TH CONVERTERS SINAMICS V90

SINAMICS V90; WITH PROFINET INPUT VOLTAGE: 200-240 V 3-P -15%/+10% 11.0 A 45-66 HZ OUTPUT VOLTAGE: 0 – INPUT 10.6 A 0-330 HZ MOTOR: 1.5 KW DEGREE OF PROTECTION: IP20 SIZE D; 95X170X195 (WXHXD)

CÂBLE MONOBRIN PRÉCONNECTORISÉ 4G0;75+2X0;5+4X0;2 C CONNECTEUR SPEED-CONNECT M17 FILS SOUS GAINE LIGNE DE DONNÉES AVEC PRISE IX UL/CSA DESINA MOTION CONNECT 500 DMAX.=10;5 MM; LONGUEUR(M)= 0 + 20 + 0 + 0