Servodrive / Starter

- 30KW - 3PH; 380V / 460V - STANDARD LIVERY - IP20 + FALLING DIRT PROTECTION - NO KEYPAD - ENGLISH - ENCODER (WIRE-ENDED)

MASTERDRIVES SIMOVERT VECTOR CONTROL INVERTER APPLIANCE BUILT-IN; IP00 510-650V DC; 590A POWER TYPE: 315KW

CARTE PLATINE POUR RÉGULATION BOL VIBRANT

500A 200 À 440VAC

SERVO INVERTER

SIMOREG K CONVERTER WITH MICROPROCESSOR FOR FOUR-QUADRANT DRIVES CONNECTION (B6)A(B6)C; 3-PHASE; AC 500V CONTROLLABLE FIELD RECTIFIER D520/60 MREQ-GEG 6V62

ELAU SX-1; SX-1/22/1/0

DIGITAX ST PLUS; C. NOMINAL 8 A RMS ; C. PICO 24 A RMS; 3X380/480V

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):0;63 /2;35; UPRI(V):600-575-550-525-500- 480-460-440-415-400-240-230; USEC(V):2X115; ISEC(A):2;74-5;48; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB CONNECTION; INSTALLATION:SCREW; EN 61558-2-1; -2-2; -2-4 >UL/CSA-RECOGNIZED< >CONTROL CIRCUIT TRANSFORMER< >ISOLATION TRANSFORMER

TYP VMA 21/KR 001-D INPUT 3PH; 50/60 HZ - 460V; 20A AC OUTPUT 670V; 24A DC

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER UNIT COMPACT PLUS DESIGN DEGREE OF PROTECTION IP20 DC510V-650V; 34A NOM. POWER RATINGS: 15 KW DOCUMENTATION ON CD

MR-J4-40TM-PNT. DIGITAL AC-SERVO AMPLIFIER MR-J4-TM FOR RATED MOTOR POWER 400 W - PROFINET

3PH 380VAC 3KW 4HP 7;5A

MODELE : (EPOWER) CONTRÔLEUR DE PUISSANCE EPOWER QTE MODULE ET PUISSANCE : (3PH-500A) UNITÉ 3 PHASES 500 AMPÈRES TENSION : (600V) 100V À 600V ALIMENTATION VENTILATEUR : (230V) 230 VAC GARANTIE : (XXX) GARANTIE STANDARD ETIQUETAGE PERSONNALISE : (XXX) ETIQUETAGE STANDARD NON STANDARD : (XXX) STANDARD OPTION : (OO) OPTIONS / CODE QUICK START PROTOCOLE DE COMMUNICATION : (XX) PAS DE RÉSEAU DE COMMUNICATIONS

AXOR MINISPEED 140 DC DRIVE 8 AMP

DRIVE JUNMA PULS 200W 200V

DEMARREUR ELECTRIQUE SIRIUS; T. S3; 63 A; 30 KW / 400 V; AC 200...460 V; UC 110...230 V; RACCORDEMENT PAR VIS;

SINAMICS G120C PUISSANCE NOMINALE: 1;1 KW AVEC SURCHARGE DE 150% PENDANT 3 SEC. 3AC380-480V+10/-20% 47-63HZ FILTRE INTÉGRÉ CLASSE A INTERFACE D’E/S: 6DI; 2DO; 1AI; 1AO SUPPRESSION SÛRE DU COUPLE (SAFE-TORQUE-OFF) INTÉGRÉE BUS DE TERRAIN INTÉGRÉ: PROFIBUS-DP INDICE DE PROTECTION IP20/UL OPEN TYPE TAILLE: FSA 196 X 73 X 203 (HXLXP) EXTERNE 24V

INVERTER-OMRON-YASKAWA-V1000-CIMR-VC4A0009BAA-3KW-400V-3PH-INVERTER

SINAMICS POWER MODULE PM240-2 FILTRE INTEGRE CLASSE A A HACHEUR DE FREINAGE INTEGRE 3AC380-480V +10/-10% 47-63HZ PUISS. SURCHARGE ELEVEE: 3KW A 200% 3S;150% 57S;100% 240S TEMPER. AMB. -10 A +50 DEG. C PUISS. FAIBLE SURCHARGE: 4KW A 150% 3S;110% 57S;100% 240S TEMPER. AMB. -10 A +40 DEG. C 291 X 100 X 165 (HXLXP); FSB INDICE DE PROTECTION IP20 SANS UNITE DE COM. ET UNITE DE PROGRAMMATION VALIDE A PARTIR DE CU FIRMWARE-VERSION V4.6

FAGOR AXD 2.75-S0-0 DRIVE MODULE

CAPACITY 45KW; CURRENT 100A; MAIN POWER SUPPLY 380-480V; PHASE: 3; OUTPUT FREQUENCY 0-550 HZ; ENCLOSURE IP 20

ABB 3ADT313900R1501 SDCS-CON-4 COAT-ROHS CONTROL BOARD

AC INVERTER FOR 110KW (150HP) 400V 3 PH MOTOR TO 206A AT HIGH OVERLOAD OR 132KW (175HP) TO 234A WHEN FAN/PUMP RATED. OPERATES IN VXF OR SENSORLESS VECTOR CONTROL AND CONVERTS FIXED FREQUENCY THREE PHASE 400V INPUT TO VARIABLE FREQUENCY 400V TO CONTROL THE SPEED OF A STANDARD AC INDUCTION MOTOR.

SIMOVERT P TRANSISTOR PWM CONVERTER CHASSIS UNIT 10KVA; 50/60HZ; 380V

SINUMERIK 840D NCU 572; 5 AXES/BROCHES MAX. 8 AXES; DONT 5 BROCHES PREPARE POUR NUMERISATION (DESIGN 611D)

RÉDUCTEUR AXE 2 & 3; RV320E-31=171; POUR ROBOT ABB IRB2600 IRB4600

SERVOSTAR 446MP IP20 3X230V..3X400V 50/60 HZ 6 AMP MASTER MODUL PROFIBUS

DSQC236K : VARIATEUR D'AXE POUR ROBOT ABB S3; TYPE IRB

DSQC266B : VARIATEUR D'AXE POUR ROBOT ABB S3/S4; TYPE IRB

DSQC266T : VARIATEUR D'AXE POUR ROBOT ABB S3/S4; TYPE IRB

DSQC236B : VARIATEUR D'AXE POUR ROBOT ABB S3; TYPE IRB2000 / IRB3000 / IRB3200

DSQC236G : VARIATEUR D'AXE 4 & 6 POUR ROBOT ABB S3; TYPE IRB6000

EUROTHERM DISQUE 601/015/230/F/00/US. ENTRÉE 220-240 V; COURANT DE SORTIE

SIEMENS 6SL3225-0BH31-1AA1 SINAMICS G120 POWER MODULE PM260 WITH BUILT IN CL. A FILTER POSSIBILITY OF REGENERATION 3AC660-690V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 11KW FOR 200% 3S; 150% 57S; 100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 15KW FOR 140% 3S; 110% 57S; 100% 240S AMBIENT TEMP -10 TO +40 DEG C 512 X 275 X 204 (HXWXD); FSD PROTECTION IP20 WITHOUT CONTROL UNIT & BOP

SERVO DRIVE; 59.6 AMP; KINETIX 7000

SERVOVARIATEUR 6 AXES POUR ROBOT FANUC TYPE S-430IW / M-410I; RJ3 REF : A06B 6100 H001

SIMOREG K CONVERTER WITH MICROPROCESSOR FOR SINGLE-QUADRANT DRIVES CONNECTION B6C; 3-PHASE;AC 400V CONTROLLABLE FIELD RECTIFIER D485/30 MRE-GEE 6S22

SIMOVERT MASTERDRIVES MOTION CONTROL INVERTER; COMPACT UNIT; DEGREE OF PROTECTION IP20 510-650V DC; 25.5 A; NOM. POWER RATINGS 11 KW; WATER-COOLED ; BASE DRIVE FOR ADDITIONAL OPTIONS PLEASE CONTACT OUR SALES STAFF!

175H1205

8200-SERIES VECTOR FREQUENCY INVERTER; WITHOUT INTERFERENCE SUPPRESSION MEASURES; MAINS CONNECTION 3 X 400 / 500 V; RATED POWER: 30.0 KW

MICROMASTER 440 WITHOUT FILTER 3AC 380-480 V +10/-10% 47-63 HZ CONSTANT TORQUE POWER 37 KW OVERLOAD 150% 60 S; 200% 3 S SQUARED TORQUE POWER 45 KW 650 X 275 X 245 (H X W X D) PROTECTION IP20 AMBIENT TEMP. -10 TO +50 DEG. C WITHOUT AOP/BOP

SIMOVERT MASTER DRIVES INPUT-FEEDBACK FEED UNIT REPLACEMENT DEVICE/IP00 3 AC 380-75A480V; 50/60HZ 605A ; BASE DRIVE FOR ADDITIONAL OPTIONS PLEASE CONTACT OUR SALES STAFF!

MASTERDRIVES SIMOVERT CONTRÔLE VECTORIEL ONDULEUR APPAREIL ENCASTRABLE; IP00 510-650V CC; 510A PUISSANCE DE TYPE: 250KW

P OUT MAX Y 5(2)A;230V

SIEMENS 6SE7027-2TD51

SIMOVERT MASTERDRIVES MOTION CONTROL FORME COMPACTE CONVERTISSEUR INDIRECT TRIPH. 380-480V; 50/60HZ; 17;5A

CONVERTISSEUR DE FRÉQUENCE SEW MC07A011-2B1-4-00 1;1 KW

FCD315PT4P66EXR1D0F10T00C0 VLT® DECENTRAL FCD 300 (15) 1;5 KW / 2;0 HP; (4) 380-480 V +/- 10 % 50/60HZ; (66) IP66; (R1) EN 55011 CLASSE A1

SIMOVERT MASTERDRIVES SIMOVERT VC CONVERTER UNIT CHASSIS UNIT; IP00 3-PH. 380 TO 460 V; 50/60 HZ 92.0 A NOMINAL POWER RATING: 45 KW

8200-SERIES VECTOR FREQUENCY INVERTER; INPUT: 3/PE AC 230/240V 21;3A 50-60HZ; OUTPUT: 3/PE AC 0-230/240V 16;5A 4;0KW/5;4HP 0-650HZ

SIMOVERT MASTERDRIVES SIMOVERT VC INVERTER UNIT CHASSIS UNIT; IP00 675 TO 780V DC 297.0 A NOMINAL POWER RATING: 200 KW

CONVERTER - DRIVE INPUT : 380V - 50/60HZ - 71A OUTPUT : 460V - 87A

SIMOVERT MASTERDRIVES OUTPUT REACTOR FMAX = 120HZ; FP = 3KHZ 3 380-460V AC 92A

STOBER AC DRIVE MDS5040A/L 4 KW

VLT AQUA DRIVE 4KW INVERTER DRIVE 10A; THREE PHASE WITH A 380...480V AC SUPPLY

ISEL PHOTORÉPÉTEUR CONTRÔLEUR DE MOTEUR/CONDUCTEUR; UN SEUL AXE;

YASKAWA VARISPEED F7 AC DRIVE 1.5 KW 2.8 KVA AC INPUT; 3-PHASE; 400 V

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER COMPACT PLUS DESIGN DEGREE OF PROTECTION IP20 DC510V-650V; 6.1A NOM. POWER RATINGS: 2.2 KW DOCUMENTATION ON CD WITH Z OPTION

NUM MDLD1034Q00 VARIATEUR D'AXE NUM 34 A

SIMOVERT MASTERDRIVES 3AC 380V- 460V; 655 A AFE RECTIFIER/REGENERATIVE UNITS INVERTERS NOMINAL POWER: 400 KW WATER COOLING

SINAMICS S120 SINGLE MOTOR MODULE INPUT: 600 V DC OUTPUT: 3-PH 400 V; 380 A FRAME SIZE: CHASSIS INTERNAL AIR COOLING SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

3P 400VAC 30 KW 62A CARTE BUS ETHERNET IP/MODBUS TCP IDEM N° SERIE FOURNIT: 05.7894951601.0001.20

SIMOREG-K CONVERTER UNIT WITH MICROPROCCESSOR; VERSION USA INCL. FUSES MAIN CONTACTOR DESIGNED FOR FOUR-QUADRANT DRIVES BRIDGE CONNECTION (B6)A(B6)C 3-PHASE; AC 230/460V 510A

DRIVE FREQUENCY CONVERTER; 3 PHASE; 15 AMP; 7.5KW; 380-480VAC; 50/60HZ; WALL MOUNTING; IP21

VARIATEUR DE FRÉQUENCE OMRON; 4 KW 400 V 3 PHASES; 9;2 A; 0.1 ? 400HZ

DIGIDRIVE SK 20T - 15KW - 20HP - 29A À 43;5A CRETE

ABB DC CONVERTER DCS 800 VOLTAGE : 525 V; CURRENT : 520 A; DOUBLE BRIDGE

SIMOVERT MASTERDRIVES VECTOR CONTROL INVERTER COMPACT UNIT; IP20 675-810V DC; 11A NOM. POWER RATINGS: 5.5KW OPTION Z=

DC590+ DRV DC DIGITAL DRIVE 4 Q 110 AMP INPUT 3 PH 220 TO 500V (±10%) 50/60HZ ENCODER (WIRE-ENDED) AUXILIARY MAINS POWER SUPPLY 220V-240VAC

SIMOVERT MASTERDRIVES MOTION CONTROL PERFORMANCE 2 ONDULEUR APPAREIL COMPACT PLUS; IP20 510-650 V CC; 59;0A PUISSANCE DE TYPE: 30 KW

SCHNEIDER ELECTRIC ALTIVAR 71 ATV71PU75N4Z 400 V 7;5 KW 10HP 17;6 A

TRI 400VAC 105A OUTPUT 87/105A

DRIVE STAR 35 AMP; 22 KVA; 230/480 VAC; 50/60 HZ

SIMOTICS S-1FK2 HD SERVOMOTEUR M0=1;27NM ; PN = 0;4KW À NN=3000 TR/MIN (200-240V) ; AVEC FREIN À L'ARRÊT ; INDICE DE PROTECTION IP64 ; ARBRE D14X30MM AVEC CLAVETTE ; CODEUR ABSOLU 22 BITS + 12 BITS MULTITOUR (ENCODEUR AM22DQC) ; AVEC INTERFACE OCC ; CONNECTEUR TAILLE M12; ORIENTABLE

CARTE COMMANDE DE MOTEUR PAS À PAS

CIMR-G3E40P7

The equipment with type Variateur / Démarreur is manufactured by STOBER and commercialized under the reference SI6A261. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by EUROTHERM and commercialized under the reference 605/015/400/3/F/0010/UK/000.The equipment alternative reference is : 6050154003F0010UK000. This product comes from the 605 AC DRIVE range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DELTA and commercialized under the reference VFD750CP43B-21.The equipment alternative reference is : VFD750CP43B21. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference 134G8893. This product comes from the FC 300 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ABB and commercialized under the reference DCS501B0140-51-21P2000.The equipment alternative reference is : DCS501B01405121P2000. This product comes from the DCS 500 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by FANUC and commercialized under the reference A06B-6150-H011.The equipment alternative reference is : A06B6150H011. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by BERGES and commercialized under the reference ACM1K40022H. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ABB and commercialized under the reference NDCU-21C-02.The equipment alternative reference is : NDCU21C02. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by LENZE and commercialized under the reference EVS9331-EK.The equipment alternative reference is : EVS9331EK. This product comes from the 9300-SERIES range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ELGE and commercialized under the reference SDCC110/8/20.The equipment alternative reference is : SDCC110820. This product comes from the SDCC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ROWAN ELETTRONICA and commercialized under the reference 380S/0.The equipment alternative reference is : 380S0. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by KEB and commercialized under the reference 13G6CDB-3910.The equipment alternative reference is : 13G6CDB3910. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by SIEMENS and commercialized under the reference 6SL3210-1KE13-2AP2.The equipment alternative reference is : 6SL32101KE132AP2. This product comes from the SINAMICS G120C range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ELAU and commercialized under the reference MAX-4/11/02/016/99/0/0/01.The equipment alternative reference is : MAX41102016990001. This product comes from the PACDRIVE range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ELAU and commercialized under the reference MAX-4/11/02/016/99/0/1/01.The equipment alternative reference is : MAX41102016990101. This product comes from the PACDRIVE range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by VACON and commercialized under the reference NXL00075C2H1SSS00AA. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by EUROTHERM and commercialized under the reference 461/062/28/43/008/001/00.The equipment alternative reference is : 461062284300800100. This product comes from the 461 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by MITSUBISHI and commercialized under the reference MDS-DH-V2-1010.The equipment alternative reference is : MDSDHV21010. This product comes from the MELDAS range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by LENZE and commercialized under the reference Z351CBARBAG230FA8S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by ALLEN BRADLEY and commercialized under the reference 2093-AC05-MP1.The equipment alternative reference is : 2093AC05MP1. This product comes from the KINETIX 2000 range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by TB WOOD and commercialized under the reference WF2K40220D1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference FC102P11KT4E20H3XGXXXXSXXXXAXBXCXXXXDX. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.