NC AG ASSOCIATES

RELAIS DE TEMPS; 0;5÷10S; DPDT; 250VAC/5A; 24VDC; SUPPORT; PIN: 8

MODULE DE REFROIDISSEMENT

BOSCH REXROTH 3842552226. LED SYSTEM LAMPS; REGULATOR DIM-BOX

SINUMERIK 840D SL CNC SOFTWARE 31-3 6 LANGUAGES: DE; EN; FR; SP; IT; ZH-S SOFTWARE 4.8 SP4 ON CF CARD WITH LICENSE

SINUMERIK 840D SL SINUMERIK PCU-BASESOFTWARE /IPC FOR SIMATIC IPC SOFTWARE OPTION DELIVERY OF A LICENSE

CIRCUIT BREAKER 3VA2 IEC FRAME 630 BREAKING CAPACITY CLASS C ICU=110KA @ 415V 3-POLE; MOTOR PROTECTION ETU350M; LSI; IN=400A OVERLOAD PROTECTION IR=160A...400A SHORT-CIRCUIT PROTECTION ISD=3...15 X IR; II=15 X IN NUT KEEPER KIT

80C51 8-BIT MICROCONTROLLER FAMILY 8K­64K/256­1K OTP/ROM/ROMLESS; LOW VOLTAGE (2.7V­5.5V); LOW POWER; HIGH SPEED (33 MHZ)

MODULE D'INTERFACE AVEC RELAIS; RSS; LP2N 5.08MM; RACCORDEMENT VISSÉ; CONNECTEUR DÉBROCHABLE SELON CEI60603-13 / DIN41651; 20 PÔLES MÂLE; 24 V DC ±; 10%; 13 MA

OSISENSE X - CODEUR INCRÉMENTAL Ø58 - AXE PLEIN 10MM - 5000 POINTS - 5 V RS422

BUS CABLE FOR ET CONNECTION M8; ASSEMBLED ON BOTH ENDS WITH 2X M8 CONNECTORS; 4-POLE; SHIELDED LENGTH 10 M

POWER CABLE M8; BOTH ENDS ASSEMBLED WITH M8 CONNECTOR AND M8 SOCKET; 4-POLE; LENGTH 10 M

H051045 DÉMARREUR PROGRESSIF PSTX 1050A 690V MAX-100…250VAC

MOTEUR AUTOSYNCHRONE 4NM 3000TR/MN 1;26K | W 3;5A BTLF75 BA:14X40 CLAV.+FREIN 5N | M+COD.ABS.+CONNECT.

OMRON LY4 RELAIS SANS ACCROCHAGE 4 RT; BOBINE 240V C.A. ENFICHABLE 2.5W

OMRON LY2 RELAIS SANS ACCROCHAGE 2 RT; BOBINE 240V C.A. MONTAGE SUR CI 1.1W

16 GB COMPACT FLASH CARD; EXTENDED TEMPERATURE SPECIFICATION; INSTEAD OF 128 MB COMPACT FLASH

SIMOVERT MASTERDRIVES RECTIFIER CHASSIS UNIT/IP00 3 380-480V AC; 50/60HZ; 270A

PRE-ASSEMBLED POWER CABLE 4 X 2.5; FOR MOTOR S-1FL6 LI 20 SH50 WITH V90 DESIGN D MOTION-CONNECT 300 NO UL FOR PLUG-IN CONNECTOR DM ON THE MOTOR SIDE LENGTH: 20 M WITH STRAIGHT CONNECTO

MODUFLEX PROPORTIONALTECHNOLOGY1/8” AND 1/4” PORTEDPROPORTIONAL REGULATOR MPT40

TOSHIBA VF-S15 11KW 400V 3PH AC INVERTER DRIVE; DBR; C3 EMC

PROGRAMMING CONSOLE UNIT HAND-HELD

TRANSFORMATEUR PCB; EI 30 X 10.5; ISOLEMENT DE SÉCURITÉ ENCAPSULÉ; ± 230V; 9V; 1 VA; 50HZ/ 60HZ

PLATINE 25KHZ N° 7123.1007/G17C3022

LEXIUM BSH - SERVO-MOTEUR - 6;7N.M - LISSE IP50 - 100MM - MONOTOUR - FREIN

DÉPART-MOTEUR COMPACT DÉMARREUR DIRECT 32A

CONDENSATEURS ÉLECTRONIQUES DE PUISSANCE DUCATI ENERGIA 4.16.10 100MF 450V C.A. ±5% C MONTAGE A GOUJON M8 + FILS

SITRANS P320 TRANSMETTEUR PRESSION RELATIVE (P_REL) HART (4...20 MA) LIQUIDE TAMPON DE CELLULE DE MESURE: HUILE DE SILICONE ETENDUE DE MESURE: 16 BAR (232 PSI) FILETAGE (MÂLE) G1/2 RACCORD PROCESS: ACIER INOXYDABLE 316L/1.4404; PIÈCES EN CONTACT DU FLUIDE: ACIER INOXYDABLE 316L/1.4404; PRESSION DIFFÉRENTIELLE CAPTEUR: FLASQUE: ACIER INOXYDABLE 316/1.4408 BOÎTIER ALUMINIUM COULÉ SOUS PRESSION APPAREIL À CHAMBRE DOUBLE SANS EX 2 X M20 X 1;5 AVEC ÉCRAN (COUVERCLE AVEC PANNEAU EN VERRE) PRESSE-ÉTOUPES INCLUS EN POLYAMIDE MARQUAGE PLAQUE SIGNALÉTIQUE ALLEMAND - BAR UTILISATION GÉNÉRALE SANS HOMOLOGATION EX : CSA (USA & CANADA)

NOEUD BUS DE TERRAIN CP 13 TYPE CP?FB13?E

DSTA N001 CONNECTION UNIT; 3BNP000044R1

-   ECRAN LCD 12.1” TECHNOLOGIE LED;  NEUF DE REMPLACEMENT POUR ÉCRAN CRT14” COULEUR POUR SIEMENS 840D;  AVEC ADAPTATION MÉCANIQUE FIXATION TUBE; SANS CÂBLE ENTRÉE 3XBNC

PROXIMITOR SENSOR MODEL: 330878 - 3300 XL 50 MM PROXIMITOR SENSOR TOTAL LENGTH AND MOUNTING OPTION: -90 - 9.0 METRES (29.5 FEET) SYSTEM LENGTH; PANEL MOUNT

The equipment with type CONTRÔLE COMMANDE is manufactured by MAKINO and commercialized under the reference HP-102Y-(66)-100.The equipment alternative reference is : HP102Y66100. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by BENTLY NEVADA and commercialized under the reference 87P01 A & B.The equipment alternative reference is : 87P01A&B. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Automate is manufactured by AEG and commercialized under the reference B00635940000. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by ABB and commercialized under the reference FPD585 M1G5S6.The equipment alternative reference is : FPD585M1G5S6. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by EUROTHERM and commercialized under the reference EPOWER/2PH-400A/600V/230V/XXX/XX/XX/XX/XX/XX/XXX/XX/XX.The equipment alternative reference is : EPOWER2PH400A600V230VXXXXXXXXXXXXXXXXXXXX. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by DURANT and commercialized under the reference 57602-404.The equipment alternative reference is : 57602404. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by GECMA and commercialized under the reference GEC-GI1MO-RTKCU-00.The equipment alternative reference is : GECGI1MORTKCU00. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by YASKAWA and commercialized under the reference SGM7A04A7A61. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by LFE and commercialized under the reference BR3G2410. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by B & R and commercialized under the reference 8MSA4M.E3-33.The equipment alternative reference is : 8MSA4ME333. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by ALLEN BRADLEY and commercialized under the reference 1783-US14T2S.The equipment alternative reference is : 1783US14T2S. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by BAUMULLER and commercialized under the reference BUG622-28-54-E-005.The equipment alternative reference is : BUG6222854E005. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by ABB and commercialized under the reference NINT-72C MD KIT.The equipment alternative reference is : NINT72CMDKIT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by DANFOSS and commercialized under the reference VLT5011PT5C20STR1DLF00A00. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 3TY6470-0A.The equipment alternative reference is : 3TY64700A. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by BERGER LAHR and commercialized under the reference VRDM3910/50LNBOO.The equipment alternative reference is : VRDM391050LNBOO. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by ALLEN BRADLEY and commercialized under the reference MPM-B2152C-SJ72AA.The equipment alternative reference is : MPMB2152CSJ72AA. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Automate is manufactured by OMRON and commercialized under the reference CPM1A-10CDR-A-V1.The equipment alternative reference is : CPM1A10CDRAV1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NX-EC0222.The equipment alternative reference is : NXEC0222. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type PUISSANCE / CONVERSION ENERGIE is manufactured by KEB and commercialized under the reference 00.F5.080-1000.The equipment alternative reference is : 00F50801000. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by WAGO and commercialized under the reference 753-517.The equipment alternative reference is : 753517. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by BEI and commercialized under the reference DHO510 //RG29//1024//G3R003.The equipment alternative reference is : DHO510RG291024G3R003. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by PHOENIX CONTACT and commercialized under the reference 2905907. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference R88D-1SN01H-ECT.The equipment alternative reference is : R88D1SN01HECT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

SIMATIC C1 PCB 2 SPS 8 DRIVERS; 0.4 A

SIMATIC C1 PCB; 1 SPS 3 TIMERS; 10 MS TO 120 S

SIMATIC C1 PCB; 1 SPS 11 INHIBITING AND GATES

131B0052 DRIVES VLT AUTOMATION DRIVE FC 300 7.5 KW / 10 HP; 380-500 VAC; IP20 / CHASSIS; RFI CLASS A..

GP 0331-02; RAID 0 & 1; PCI; LOW PROFILE

4 ENTRÉES LOGIQUES DE SÉCURITÉ INTRINSÈQUE PLAN TSTL0203-03CA REPÈRE 214IS1

DÉTECTEUR SICK ICR840-0020S01

PARKER SSD 890SD 5.5KW 400V AC INVERTER DRIVE; STO; C3 EMC

SIMATIC ET 200SP; BASE-UNIT BU20-P16+A0+2D; TYPE BU U0; COLISAGE PAR 1; BORNES PUSH-IN; SANS BORNES AUX; NOUVEAU GROUPE DE POTENTIEL; LAXH: 20MM X 117MM

WR MODULE CONDUCTOR BARS DESIGN L (B11) FOR SIMOVERT MASTERDRIVES

SIMOTICS S SYNCHRONOUS SERVO MOTOR 1FK7 HIGH DYNAMIC; 3.1NM 100K; 4500RPM; 1.23KW NATURALLY COOLED IM B5 (V1; V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED BY 270° ABSOLUTE ENCODER ENDAT 2048 P/REV (ENCODER A-2048); PERFORMANCE REDUCTION BY 10% DUE TO ABSOLUTE ENCODER; SHAFT WITH FITTED KEY; TOLERANCE N; W/O HOLDING BRAKE DEGREE OF PROTECTION IP64

SIMATIC IPC 477E 15" TACTILE (1280 X 800); AVEC USB EN FACE AVANT; 4 USB (FACE ARRIÈRE); ETHERNET (10/100/1000); CORE I5-6442EQ ; ETHERNET 3 GIGABIT (IE/PN) ; 8 GO ; SANS RS232/RS485 ; SANS PCIE ; WINDOWS 10 ENTREPRISE 2019 LTSC (64 BIT); MUI (EN;DE;FR;IT;ES) POUR CELERON; I3 ET I5 ; SANS MÉMOIRE DE MASSE REMPLAÇABLE ; HDD SATA 320 GO ; SANS LOGICIEL SIMATIC ; ALIMENTATION INDUSTRIELLE 24 V CC

ARMOIRE COMPACTE IP54 415V ATV71 400KW OPTION S1263

SIMOVERT MASTERDRIVES MOTION CONTROL - PERFORMANCE 2 ONDULEUR FORME COMPACT PLUS; IP20; 510-650 V CC; 37;5 A PUISSANCE DE TYPE: 18;5 KW

LOGO! 24CE; LOGIC MODULE; DISPLAY PS/I/O: 24 V/24 V/24 V TRANS.; 8 DI (4 AI)/4 DO; MEMORY 400 BLOCKS; MODULARLY EXPANDABLE; ETHERNET INTEGR. WEB SERVER; DATA LOG; USER-DEFINED WEB PAGES; STANDARD MICROSD CARD FOR LOGO! SOFT COMFORT V8 OR HIGHER; OLDER PROJECTS EXECUTABLE

STOBER POSIDRIVE MDS5075A/L 11KVA INPUT 3 PH 480VAC OUTPUT 3PH 0-480VAC 10 AMP 0-700HZ

CONNECTION CABLES [1SNA 039 004 R2200] LENGTH: 3M SHELF LIFE: 0 MFR:

GALIL DMC 620 REV C CONTRÔLEUR DE MOUVEMENT CARTE DMC-620

The equipment with type Accessoires is manufactured by ENERDIS and commercialized under the reference RMME13-C125.The equipment alternative reference is : RMME13C125. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

TERMINAL À ÉCRAN TACTILE 10" LCD 640X480

ADAPTER; RS485/422 TO RS432 CONVERTER; FOR HANDHELD PROGRAMMER

SIMOTICS S-1FL6 TENSION DE SERVICE 230 V 3 CA PN=0;75 KW ; NN=3000 TR/MIN M0=2;39 NM ; MN=2;39 NM HAUTEUR D'AXE 40 MM CODEUR INCRÉMENTAL TTL 2500 INCR/TR AVEC CLAVETTE TOLÉRANCE N SANS FREIN DE MAINTIEN INDICE DE PROTECTION IP65 AVEC BAGUE D'ÉTANCHÉITÉ COMPATIBLE AVEC LES VARIATEURS SINAMICS V90

SERVOMOTEUR SÉRIE G5 100 W; COUPLE NOMINAL 0;32 NM; COUPLE DE POINTE 0;95 NM

TESYS CA2K - CONTACTEUR - 4F+0O - INSTANTANÉ - 10A - 115VCA

ENREGISTREUR TRYBRIDE SUPPORTANT 16 CAMÉRAS DE TYPE ANALOGIQUES; HDCVI; OU IP

1;5KW 2 X STO

NX430EAJR7300

IHM 7’’

DC FANS DC AXIAL FAN; 60X15MM; 12VDC; 16.6CFM; 1.56W; 32.4DBA; 4500RPM; 0.152INCHH2O; BALL BEARING

ARBRE D'ENTRÉE AXE 4

MODULE D'ALIMENTATION INLINE; AVEC ACCESSOIRES; 24 V DC; AVEC FUSIBLE

RSM8563BFK MOTOR 230V 50/60HZ C0 68 G 60/72 U/MIN

131F5456 DRIVES VLT® HVAC DRIVE FC 102 18.5 KW / 25 HP; 380 480 VAC; NO BRAKE CHOPPER; IP20 / CHASS..

NX ENTRÉES/SORTIES NUMÉRIQUES DE SÉCURITÉ; 8 ENTRÉES 24 VCC PNP

DRIVER FOR ROTARY ACTUATOR 5.5 KW S5; MECHATROLINK-II CONTROL; 3 X 400 VAC

VARIATEUR DE VITESSE DANFOSS FC-102P30KT4P55H2XGXXXXSXXXXAXBXCXXXXDX 30 KW / 40 CV; 380 - 480 VAC; 61A;

SIMATIC MOBILE PANEL 277 F IWLAN (RFID) (UE); AVEC TOUCHE D'ASSENTIMENT INTÉGRÉE; BOUTON D'ARRÊT D'URGENCE; MOLETTE; COMMUTATEUR À CLÉ ET DEUX BOUTONS-POUSSOIRS LUMINEUX; PREND EN CHARGE IPCF MOBILITÉ ÉTENDUE (RAPID ROAMING) CONFIGURABLE AVEC WINCC FLEXIBLE STANDARD À PARTIR DE LA VERSION 2008 SP 2 OU TIA PORTAL À PARTIR DE V11 SP2 INCL. UNE BATTERIE PRINCIPALE ALIMENTATION ÉLECTRIQUE À COMMANDER SÉPARÉMENT

SIMOTICS S-1FL6 OPERATING VOLTAGE 3AC 400 V PN=0.4 KW; NN=3000 RPM M0=1.9 NM; MN=1.27 NM SHAFT HEIGHT 45 MM ABSOLUTE ENCODER 20 BIT (12-BIT MULTI-TURN) PLAIN SHAFT; TOLERANCE N WITH HOLDING BRAKE DEGREE OF PROTECTION IP65 WITH SEALING RING COMPATIBLE WITH THE CONVERTERS SINAMICS V70 & V90

The equipment with type Alimentation is manufactured by TRACO POWER and commercialized under the reference TCL024105DC. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by MOOG and commercialized under the reference D631-342C.The equipment alternative reference is : D631342C. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by SIEMENS and commercialized under the reference 3RM1202-1AA04.The equipment alternative reference is : 3RM12021AA04. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by SIEMENS and commercialized under the reference 4AM40960FF510JS1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by ALLEN BRADLEY and commercialized under the reference 1797-PS1E.The equipment alternative reference is : 1797PS1E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by ABB and commercialized under the reference 3BSC980002R209. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.