List of products by manufacturer OMRON

RELAIS DE TEMPS; 0;5÷10S; DPDT; 250VAC/5A; 24VDC; SUPPORT; PIN: 8

OMRON LY4 RELAIS SANS ACCROCHAGE 4 RT; BOBINE 240V C.A. ENFICHABLE 2.5W

OMRON LY2 RELAIS SANS ACCROCHAGE 2 RT; BOBINE 240V C.A. MONTAGE SUR CI 1.1W

OMRON CP1LM60DT1D CPU; (36) INPUT; (24) PNP OUTPUT; 10K STEPS PROGRAMS

OMRON AC SERVO MOTOR; CUBE-TYPE;400V ;BRAKE ; 1.5K

PROGRAMMING CONSOLE UNIT HAND-HELD

The equipment with type Automate is manufactured by OMRON and commercialized under the reference CPM1A-10CDR-A-V1.The equipment alternative reference is : CPM1A10CDRAV1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NX-EC0222.The equipment alternative reference is : NXEC0222. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference R88D-1SN01H-ECT.The equipment alternative reference is : R88D1SN01HECT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

SERVOMOTEUR SÉRIE G5 100 W; COUPLE NOMINAL 0;32 NM; COUPLE DE POINTE 0;95 NM

NX ENTRÉES/SORTIES NUMÉRIQUES DE SÉCURITÉ; 8 ENTRÉES 24 VCC PNP

The equipment with type Automate is manufactured by OMRON and commercialized under the reference CP2E-S40DT1-D.The equipment alternative reference is : CP2ES40DT1D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference CS1WBI083. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NXDA2603. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CJ2M-CPU15.The equipment alternative reference is : CJ2MCPU15. This product comes from the CJ2M range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference OS32C-SN-4M.The equipment alternative reference is : OS32CSN4M. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference S8JX-G10024CD.The equipment alternative reference is : S8JXG10024CD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference S8FS-C10024J.The equipment alternative reference is : S8FSC10024J. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by OMRON and commercialized under the reference E5CJ-R2.The equipment alternative reference is : E5CJR2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference NX102-1200.The equipment alternative reference is : NX1021200. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88D-1SN15H-ECT.The equipment alternative reference is : R88D1SN15HECT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference R88A-CR1B010NF-E.The equipment alternative reference is : R88ACR1B010NFE. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by OMRON and commercialized under the reference 3G3AX-MX2-EIP.The equipment alternative reference is : 3G3AXMX2EIP. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference MK3P5-S-AC24.The equipment alternative reference is : MK3P5SAC24. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference ESCC-RX3D5M-001.The equipment alternative reference is : ESCCRX3D5M001. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference CS1D-CPU65H.The equipment alternative reference is : CS1DCPU65H. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NX-AD3204.The equipment alternative reference is : NXAD3204. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference F150VS10M. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by OMRON and commercialized under the reference G2R-1-SNDI-AP3 DC24.The equipment alternative reference is : G2R1SNDIAP3DC24. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88M-1M40030T-S2.The equipment alternative reference is : R88M1M40030TS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88D-KN08H-ECT.The equipment alternative reference is : R88DKN08HECT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference R88D1SN30FECT. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference CP1W-EIP61.The equipment alternative reference is : CP1WEIP61. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP1L-EL20DR-D.The equipment alternative reference is : CP1LEL20DRD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference CP1W8ET. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference C1000H-CPU01-V1.The equipment alternative reference is : C1000HCPU01V1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference MX2-A4075-E.The equipment alternative reference is : MX2A4075E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

OMRON CPU CS1G-CPU43H

AC SERVO DRIVER R88D-UA08V 200 VAC; 200 W

EXTENSION SWITCH BETWEEN DRUM AND IMPULSE GIVER; 10M

INSTRUCTIONS; 16 SWITCHES; 330 RPM; 24 VDC; 8 OUTPUTS; PNP; SCREEN CONNECTION

INTERFACE HOMME-MACHINE AVANCÉ. 10;4 INCH; 640 X 480 PIXELS ÉCRAN TFT AVEC 32K C

OMRON CONTROLLER LINK UNIT CJ1W-CLK21-V1

SAFETY RELAY UNIT

MOTION CONTROL UNIT; 30 AXES; MECHATROLINK

CONTROLLERS IN CJ1 DC24V 64 PT 4.1MA

I/O MODULE; INPUT: 24VDC; 7MA; 56 POINT; NPN; OUTPUT: 24VDC/250VAC; 2AMP MAX; SCREW TERMINALS; LED INDICATORS

OMRON G5 SERIES SERVO DRIVE; ML II TYPE; 400W; 200VAC SINGLE PHASE

MICROAPI 24E/16SR; ALIM 200VAC

CABLE DE LIAISON PC LG 2M

A1000 SERIES HD: 1.5 KW; I NOM. 4.8 A / ND: 2.2 KW; I NOM. 5.4 A

CARTE DE COMMUNICATION SÉRIE

EEPROM 8K WORDS

OMRON CPM1A PLC CPU; DEVICENET NETWORKING COMPUTER INTERFACE; 2048 WORDS PROGRAM CAPACITY; 18 (DC) INPUTS

8 INPUTS AND 8 OUTPUTS

CARTE ENTRÉE ANALOGIQUE

SIGMA-II SERVO DRIVE 1000 W INPUT 380-480 VAC 50-60 HZ 3.5 A OUTPUT 3PH 0-480 VAC 3.5 A

INTERFACE HOMME-MACHINE AVANCÉ. 10;4 INCH; 640 X 480 PIXELS ÉCRAN TFT AVEC 32K C

OMRON 3G3FV AC DRIVE 3PH AC 400V 5.5 KW 8A 0-400HZ

8 INPUT POINTS; 12 TO 24 V; INDEPENDENT COMMONS

PROGRAMMABLE TERMINAL (HMI); 12.1 INCH; TFT; 256 COLOURS (32;768 COLOURS FOR .BMP/.JPG); 800X600 PIXELS; 2 X RS232 PORTS; 60MBYTE MEMORY; 24 VDC; NOIR

PERATOR INTERFACE TOUCH PANEL 5 INCH DISPLAY MONOCHROME STN LCD; 256 X 128 DOTS; 2 RS-232C PORTS; 24 VDC BLACK

ALIMENTATION 220VAC 50 HZ /24DC; 120 W

COMPOBUS/S; TERMINATEUR POUR COMPOBUS/S; 1 NÉCESSAIRE PAR RÉSEAU

NT631 PROGRAMMABLE TERMINAL TFT COLOR LCD DISPLAY

OMRON AC SERVO MOTOR; 1.0KW; 3000RPM; 3.18NM

SERVO DRV; 200V;1PH;200W;

SERVO DRIVER 11.6A 230V LOAD

INVERTER- MX2 1.5 KW 4.8 A 380 V + ETHERCAT

DRIVE; MULTI-FUNCTION COMPACT INVERTER; MX2 SERIES TYPE V1; PANEL-MOUNTING (IP10 OR HIGHER)/CLOSED WALL-MOUNTING MODELS; SINGLE PHASE 200 VAC (200-V CLASS); 2.2 KW;

3G3MX2-A4022-E VARIATEUR DE FRÉQUENCE; SÉRIE 3G3MX2; IP20; 2;2 / 3;0 KW (CT/VT); 5;5 / 6;9 A; 400 VAC; 3~; VECTORIEL SANS CAPTEUR

INVERTER 5.5KW - 380-480 V3 PHASE

SMARTSLICE; 2 ENTRÉES PT100; BORNES À RESSORT GRT1 I/O BUS

NT30C PROGRAMMABLE TERMINAL 5.7" DIAGONAL 8-COLOR BACKLIT STN LCD HOST LINK / NT LINK

NT30C PROGRAMMABLE TERMINAL 5.7" DIAGONAL 8-COLOR BACKLIT STN LCD HOST LINK / NT LINK

TRANSISTOR REMOTE I/O TERMINALS WITH 3-TIER TERMINAL BLOCK 16 DIGITAL INPUT PNP

ARTICLE NUMBER : 226529

TERMINAL D'E/S COMPOBUS/S; 4 ENTRÉES ET 4 SORTIES CAPTEURS; POUR CAPTEURS AVEC AUTO-DIAGNOSTIC ET FONCTION APPRENTISSAGE; 4 ENTRÉES; NPN 24 VC.C. ET 4 SORTIES; NPN 24 VC.C. 20 MA; BORNES À VISSER

CÂBLE 2M AVEC 2 CONNECTEURS 9 BROCHES

INTERFACE HOMME-MACHINE AVANCÉ. 10;4 INCH; 640 X 480 PIXELS ÉCRAN TFT AVEC 32K C

VARIATEUR DE VITESSE; TRIPHASÉ; 2;1A; 380 À 480VAC; 2.0KVA; IP20

SERVOMOTEUR SÉRIE G 400 W AVEC CONNECTEUR CIRCULAIRE; COUPLE NOMINAL 1;3 NM; COUPLE DE POINTE 3;67 NM; CODEUR INCRÉMENTAL; 3000 T/MIN.; 230 VC.A.

OMRON C200H 10 SLOT BASE UNIT

HIGH SPEED COUNTER MODULE - UP TO 50 KHZ; UP TO 5M

RETRO-REFLECTOR; 4 M; POLARIZATION; 12-240 VDC / 24-240 VAC; STABLE; LO / DO; IP66

OMRON CPM1A PLC EXPANSION MODULE INPUT/OUTPUT 12 INPUT; 8 OUTPUT 24 V DC

I/O CONNECTOR; 5CM; FOR PLC CONTROLLER MODULE

SRT1-OD16-1 REMOTE TERMINAL

OMRON COMPACT PLC 36 INPUT 24 OUTPUT

SMARTSTEP A SERVOMOTEUR R7M-A75030-BS1-D 230V; 750W; 4.4A; AVEC FREIN POUR SERVO VARIATEUR R7D-AP08H.

SYSMAC CPU C28H BASE UNIT

TEMPERATURE CONTROL MODE; 4 CIRCUITS; PT100 INPUT; PNP VOLTAGE OUTPUT 24 VDC / 0.1 A; PID OR ON / OFF CONTROL

SMARTSTEP A R7M SERVO MOTOR 200V 750W INC 3000 RPM KEY BRAKE

HIGH-SPEED CONTROLLERS VISION SYSTEM

OMRON CPM2A PLC CPU; COMPOBUS/S NETWORKING COMPUTER INTERFACE; 4096 WORDS PROGRAM CAPACITY; 36 (DC) INPUTS

SYSDRIVE INVERTER 0.4KW 1PHASE 220-240VAC 50/60HZ