List of products by manufacturer OMRON

The equipment with type Autre is manufactured by OMRON and commercialized under the reference NB5QTW01B.1.The equipment alternative reference is : NB5QTW01B1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type PUISSANCE / CONVERSION ENERGIE is manufactured by OMRON and commercialized under the reference R88M-G20030T-S2.The equipment alternative reference is : R88MG20030TS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Automate is manufactured by OMRON and commercialized under the reference CPM1A-8ED.The equipment alternative reference is : CPM1A8ED. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

PROGRAMMABLE TERMINAL/ TOUCH SCREEN PANEL

ECRAN LCD GRAPHIQUE; STN; QVGA; 5.7

CABLE RS232 X SERIE SERVO SIGMA II 2.2 M

TERMINAL BLOCKS

ADVANCED MOTION CONTROL UNIT COMMUNICATION INTERFACE DEVICE NET

• I/O POINTS: 8 • COMMUNICATIONS TYPE: HIGH-SPEED • I/O CLASSIFICATION: OUTPUT • INTERNAL I/O CIRCUIT COMMON: NPN (- COMMON) / PNP (+ COMMON) • RATED VOLTAGE: 24 VDC

ÉCRAN TACTILE HMI; 12;1POUCES; LCD TFT; COULEUR 24BITS; 1280X800

SERVODRIVER SIGMA-II 200W 230 VAC MONO VITESSE; COUPLE; POSITION

REMOTE TERMINAL SOURCE 24VDC OUTPUT 16 POINTS 0.3A/POINT

OMRON  ENTRÉES ANALOGIQUES; THERMOCOUPLE R; S; K; J; T; L; B; BORNES À VISSER; ENTRÉES ISOLÉES MUTUELLEMENT

ECLAIRAGE DOAL SUR AXE DIFFUS; 25 MM; ROUGE; CONNECTEUR M12

G5 SERIES AC SERVO MOTOR; 200 W; 200 VAC; 3000 RPM; 0.64 NM; INCREMENTAL ENCODER

RÉFLEXION DIRECTE; VUE LATÉRALE; 15 X 10 X 3 MM; RAYON DE COURBURE 25 MM; E3X-DA-SE-S: 100 MM

RX INVERTER DRIVE; 22 KW; 48 A; 3~ 400 VAC; OPEN/CLOSED LOOP VECTOR; BUILT-IN FILTER

CP1W EXPANSION ANALOG UNITS 4 INPUT RANGE 0 TO 5 V; 1 TO 5 V; 0 TO 10 V; ±10 V; 0 TO 20 MA; OR 4 TO 20 MA. 2 OUTPUT RANGE: 1 TO 5 V; 0 TO 10 V; ±10 V; 0 TO 20 MA; OR 4 TO 20 MA.

RELAIS ÉTROIT 6 MM; AVEC 1 INVERSEUR; TENSION BOBINE 21 VC.C. POUR REMPLACEMENT

ALIMENTATIONS S8VK-T; 24VC.C./20A; 480W; RAIL DIN; PRIMAIRE 380-480VC.A

UNITÉ CENTRALE 2 PORTS PÉRIPHÉRIQUE; RS232C; SÉRIE CPM2C

FOOD; 100-240 VAC; OUTPUT 12A; 5VDC TBV CVM1 CV AND SHELVES

MEMORY CASSETTE; EEPROM; 8K WORD; WITH RTC

BATTERIE POUR AUTOMATE CPM2A

INTERRUPT MODULE; 16 IN; 24 VDC; EXCLUDING IN COMBINATION WITH CJ1 CPU'S; MAX. 2 MODULES

CAPTEURS DE PROXIMITÉ M18 SHIELDED 8MM NPN PRE-WIRED NO

PHOTOELECTRIC SENSORLONGUEUR DE CÂBLE 4M

SENSOR CONTROLLER; NPN OU;

CAM POSITIONER

OMRON REMOTE I/O UNIT

OPERATOR INTERFACE TOUCH SCREEN 5.7IN 8COLOR IVORY

OUTPUT MODULE 64POINT TRANSISTOR DISCRETE

NT31 DISPLAY LCD 5;7" MONOCHROME; 320 X 240PIXELS 195 X 142 X 74 MM

SERVOMOTOR SIGMA-II 0.75 KW 3000 TR/MIN 400 VAC 13 BITS INCRÉMENTAL CODER 1

SYSMAC PROGRAMMING CONSOLE FOR C200H

SYSMAC C200H-NC112 POSITION CONTROL UNITS

DIGITAL OPERATOR PANEL OMRON VARISPEED E7

MX INVERTER DRIVE; 3.0/4.0 KW (HD/ND); 7.2/8.8 A (HD/ND); 400 VAC; 3~; SENSORLESS VECTOR

MODULES E/S ANALOG 2 INS /2 OUT

CÂBLE 2 M ENTRE PORT MINI PÉRIPHÉRIQUE CPM2C; CQM1H; CJ ET CS ET ORDINATEUR D-SUB 9 BROCHES

DRIVER POUR SERVOMOTEURS SÉRIE G5 (75030F/C; 1K020F/C); CONTRÔLE ETHERCAT; 3 X 400 VC.A.

SOCLE 8 BROCHES POUR MONTAGE RAIL DIN AVEC BORNES À VIS

RÉF. FABR.: E2E-X3D1-M1G METAL CONN 2 WIRE OMRON PROXIMITY SENSORS ROHS : CONFORME ECCN: EAR99 / US HTS: 8543709960

RÉF. FABR.: E2E-X3D2-M1G M12; SHIELDED OMRON PROXIMITY SENSORS ROHS : CONFORME ECCN: EAR99 / US HTS: 8543709960

OMRON JUNMA AC SERVOMOTOR; 750W; 3000RPM; 2.39NM; NON-BRAKED; IP67

PROCESSUS; CONTRÔLEUR DE TEMPÉRATURE (RTD; TYPE B; E; J; K; L; N; PLII; R; S; T; U; W) 100 ~ 240 V CA MONTAGE SUR PANNEAU

CS1WOD231 TRANSISTOR OUTPUT UNIT; 32-POINT; 12 - 24 VDC

CONVERTISSEUR DE FRÉQUENCE VDF SÉRIE RX AVEC FILTRE; 30 /37 KW (CT/VT); 58/70 A (CT/VT); 400 VAC; 3~; VECTORIEL EN BOUCLE OUVERTE/FERMÉE

MEMORY; TBV CJ1; CS1 PLC AND NS HMI; 128 MB FLASH MEMORY

GENERAL PURPOSE RELAYS REMOTE TERM; 16 NPN OUTP

CÂBLES SPÉCIALISÉS 2M CB PC-DNET UNIT

OMRON WIRELESS DEVICENET MASTER UNIT; CONNECTS UP TO 32 WIRELESS DEVICENET SLAVES UNITS; TOTAL 1;024 I/O POINTS MAX

VARIATEUR DE FRÉQUENCE OMRON JX; 0;75 KW 230 V 1 PHASE; 4 A; 0.5 ? 400HZ

DRIVE JUNMA PULS 200W 200V

OMRON MY4 RELAIS SANS ACCROCHAGE 4 RT; BOBINE 24V C.C. ENFICHABLE 900MW

24V 10A

AC SERVOMOTOR; 400W; 3000RPM; 1.27NM

ALIMENTATIONS S8VK-T; 24VC.C./10A; 240W; RAIL DIN; PRIMAIRE 380-480VC.A

OMRON LY2 RELAIS SANS ACCROCHAGE 2 RT; BOBINE 24V C.C. ENFICHABLE

OMRON E5CS-R1PX-521 CONTRÔLEUR DE TEMPÉRATURE

NX102-1000NX102-1000CPU MODULAIRE SYSMAC NX1; PROGRAMME 5 MO ET 33;5 MO DE MÉMOIRE DE DONNÉES; ETHERCAT INTÉGRÉ (2 AXES SERVO; 4 AXES PTP; TOTAL DE 64 NŒUDS ETHERCAT); 2 PORTS ETHERNET (OPC-UA ET ETHERNET/IP)

OMRON E3A2-R3M4D-GN RÉFLEXION LUMIÈRE BARRIÈRE PHOTOELECTRIC SENSOR-

RÉSISTANCE DE FREINAGE 200 OHM; 200 W; IP64; SANS PROTECTION THERMIQUE

RELAIS BISTABLE 24V C.C. 3 A; 2 RT; ENFICHABLE

OMRON LY4 RELAIS SANS ACCROCHAGE 4 RT; BOBINE 230V C.A. ENFICHABLE 2.5W

G5 SERIES AC SERVO MOTOR; 750 W; 400 VAC; 3000 RPM; 2.39 NM; ABSOLUTE ENCODER; WITH BRAKE

CPU UNIT BUILT IN ETHERNET 2560 POINTS / 40 UNITS 5 K STEPS 64 K WORDS 0.7 AMP AT 5 VDC

SERIES DRIVE SERVO 1S; ETHERCAT MODEL; 2 KW; 3 ~ 400 VAC

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference C500-OC224-E.The equipment alternative reference is : C500OC224E. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88M-W1K315F-S2.The equipment alternative reference is : R88MW1K315FS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Rack is manufactured by OMRON and commercialized under the reference CS1W-BC083.The equipment alternative reference is : CS1WBC083. This product comes from the CS1W range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP2E-S60DT1-D.The equipment alternative reference is : CP2ES60DT1D. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference K8DT-LS1CA.The equipment alternative reference is : K8DTLS1CA. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference NXAD2603. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Coupleur is manufactured by OMRON and commercialized under the reference CJ1W-TS562.The equipment alternative reference is : CJ1WTS562. This product comes from the CJ1W range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by OMRON and commercialized under the reference OS32C-BP.The equipment alternative reference is : OS32CBP. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference G3PE-215B.The equipment alternative reference is : G3PE215B. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference R88D-KT10F.The equipment alternative reference is : R88DKT10F. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference NX-ECC203.The equipment alternative reference is : NXECC203. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by OMRON and commercialized under the reference S8VK-C24024.The equipment alternative reference is : S8VKC24024. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference R88M-1M40030T.The equipment alternative reference is : R88M1M40030T. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference J2M-CPU31.The equipment alternative reference is : J2MCPU31. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Accessoires is manufactured by OMRON and commercialized under the reference G7SA-4A2B.The equipment alternative reference is : G7SA4A2B. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by OMRON and commercialized under the reference CS1D-PA207R.The equipment alternative reference is : CS1DPA207R. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Alimentation is manufactured by OMRON and commercialized under the reference S8VM-05005CD.The equipment alternative reference is : S8VM05005CD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Pupitre opérateur is manufactured by OMRON and commercialized under the reference NT11S-SF121-EV1.The equipment alternative reference is : NT11SSF121EV1. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference CP2E-N40DR-D.The equipment alternative reference is : CP2EN40DRD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88M-1L2K030C-S2.The equipment alternative reference is : R88M1L2K030CS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88M-G10030H-S2-D.The equipment alternative reference is : R88MG10030HS2D. This product comes from the G-SERIES range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP1L-M30DR-D.The equipment alternative reference is : CP1LM30DRD. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference VZA24P0BAA. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Autre is manufactured by OMRON and commercialized under the reference R88M-1M60020C-BS2.The equipment alternative reference is : R88M1M60020CBS2. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Entrée/sortie is manufactured by OMRON and commercialized under the reference CP1W-16ER.The equipment alternative reference is : CP1W16ER. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type CPU is manufactured by OMRON and commercialized under the reference CP1L-M30DR-A.The equipment alternative reference is : CP1LM30DRA. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Module Métier is manufactured by OMRON and commercialized under the reference LTDVE2CH-20F.The equipment alternative reference is : LTDVE2CH20F. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Moteur is manufactured by OMRON and commercialized under the reference R88A-CAWA-003S-DE.The equipment alternative reference is : R88ACAWA003SDE. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type AUTRE is manufactured by OMRON and commercialized under the reference CIMR-L7Z44PO.The equipment alternative reference is : CIMRL7Z44PO. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.

The equipment with type Variateur / Démarreur is manufactured by OMRON and commercialized under the reference R88D-KT02H.The equipment alternative reference is : R88DKT02H. This product comes from the NC range. We guarantee the equipment in all the services offered for 12 months.