List of products by manufacturer SIEMENS

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STANDARD 15 MM WIDE +/-10 V; 13 BIT + SIGN +/-5 V; 12 BIT+ SIGN; 1..5V; 12BIT; CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMODRIVE 611 INFEED MODULE; 10/25 KW; UNREGULATED; INTERNAL/EXTERNAL COOLING; MAINS CONTACTOR WITH BREAK CONTACT

SIMATIC S5 FAN SUBASSEMBLY F. LONG MOUNTING RACKS F. 115/230V AC.

SIMATIC S7; MICRO MEMORY CARD P. S7-300/C7/ET 200; 3.3 V NFLASH; 2 MBYTES

SIMODRIVE 611 POWER MODULE; 1 AXIS; 80 A; INTERNAL COOLING; MOTOR RATED CURRENT: 1FT5 = 40 A; 1FT6 = 28 A; 1PH = 30 A; INDUCTION MOTOR = 30 A.

SINAMICS S120 SINGLE MOTOR MODULE INPUT: DC 600V OUTPUT: 3AC 400V; 45A FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE AND SUPPORT OF THE EXTENDED SAFETY INTEGRATED FUNCTIONS INCL. DRIVE-CLIQ CABLE

SIMATIC S7-1500; CPU 1516-3 PN/DP; CENTRAL PROCESSING UNIT WITH WORK MEMORY 1 MB FOR PROGRAM AND 5 MB FOR DATA; 1ST INTERFACE: PROFINET IRT WITH 2-PORT SWITCH; 2ND INTERFACE: PROFINET RT; 3RD INTERFACE: PROFIBUS; 10 NS BIT PERFORMANCE; SIMATIC MEMORY CARD REQUIRED

SIMATIC DP; 5 TERMINAL MODULES TM-E15S24-A1 FOR ET 200S FOR ELECTRONIC MODULES 15 MM WIDE;SCREW-TYPE TERMINALS 2X4 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 IN LINE; 5 PIECES PER PACKAGING UNIT

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 1 SI SERIAL INTERFACE ONE CHANNEL; 15MM WIDE RS232/422; 485 ASCII; 3964R

SIMATIC S7-300; SIGNAL. MODULE FOR 3 SSI SENSORS FOR READ-IN OF POSITIONING VALUE WITH 2 FREEZE INPUTS ; 1 X 20 PIN; SUPPORTS ISOCHRONE MODE

SIMATIC DP; POWER MODULE PM-E F PROFISAFE; FOR ET 200S; 24V DC USEABLE FOR INSTALLATIONS WITH UNGROUNDED REFERENCE POTENTIAL RELAIS FOR FAIL-SAFE SWITCHING OF VOLTAGE BUSES P1 AND P2 UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849); 2 FAIL-SAFE DIGITAL OUTPUTS UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); ALSO USEABLE IN PROFINET-NETWORKS W. IM151-3 HF

SIMATIC S7-300; CP 340 COMMUNICATION PROCESSOR WITH RS232C INTERFACE (V.24) INCL. CONFIG. PACKAGE ON CD

PROFIBUS OLM/G11 V3.1 OPTICAL LINK MODULE WITH 1 RS485 AND 1 GLASS LWL INTERFACE (2 BFOC SOCKETS); WITH SIGNALING CONTACT AND TEST PORT

SIMATIC ET 200SP; PROFINET INTERFACE MODULE ET 200SP IM155-6PN HIGH FEATURE MAX. 64 PERIPHERY MODULES; 0.25 MS ISOCHRONOUS MODE MULTI HOT SWAP; INCL. SERVERMODUL

SIMATIC S5 ACCU F. CC 188U AND EU 185U

SIMATIC S7-200; ANALOG INPUT EM 231; FOR S7-22X CPU ONLY; 4 AI; 0 - 10V DC; 12 BIT CONVERTER.

SIMATIC S7-200; CPU 224XP COMPACT UNIT; AC POWER SUPPLY 14DI DC/10DO RELAY; 2AI; 1AO; 12/16 KB CODE/10 KB DATA; 2 PPI/FREEPORT PORTS

SINAMICS S120 BASIC OPERATOR PANEL BOP20 FOR ELECTRONIC CONTROLS TWO-LINE DISPLAY; 6 KEYS FOR PARAMETER SETTING AND DIAGNOSTIC INFORMATION SUITED FOR CONTROL UNITS CU305; CU310; CU320

A5E02713398. REPLACEMENT FRONT 19" TOUCH FOR PANEL PC 677B/C

SIMATIC S7-300; CPU 312 CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 16 KBYTE WORKING MEMORY MICRO MEMORY CARD NECESSARY

SINUMERIK 840D/DE NCU BOX FOR INSTALLATION OF NCU 571/571.2/572/572.2/573; WITH POWER SUPPLY UNIT; BATTERY AND FAN

SIMATIC DP; 5 ELECTRON. MODULES FOR ET 200S; 2 DO HIGH FEATURE DC 24V/2A; 15 MM WIDTH DIAGNOSIS F. SHORT-CIRCUIT AND OPEN-CIRCUIT; FIRST-UP SIGNAL WITH LED SF (GROUP FAULT); 5 PIECES PER PACKAGING UNIT

SIMATIC ET 200SP; BASEUNIT BU15-P16+A10+2B; BU-TYPE A0; PUSH-IN TERMINALS; WITH 10 AUX-TERMINALS; BRIDGED TO LEFT BU WXH: 15MMX141MM

MICROMASTER 440 WITHOUT FILTER 380-480 V 3 AC +10/-10% 47-63 HZ CONSTANT TORQUE 1.5 KW OVERLOAD 150% 60S; 200% 3S SQUARE-LAW TORQUE 1.5 KW 173X 73X 149 (HXWXD) DEGREE OF PROTECTION IP20 AMBIENT TEMPERATURE -10+50 °C WITHOUT AOP/BOP

SINAMICS CONTROL UNIT CU320-2 PN WITHOUT COMPACT FLASH CARD

SIMATIC ET 200SP; MODULE DE RELAIS; RQ NO 4X 120 V CC..230 V CA / 5 A ST; 4 CONTACTS À FERMETURE AVEC SÉPARATION GALVANIQUE; COLISAGE: 1

SIMATIC ET 200SP; BASEUNIT BU15-P16+A0+2D; TYPE BU A0; BORNES PUSH-IN; SANS BORNES AUX; GROUPE DE CHARGE NOUV.; LXH: 15MMX117MM

SIMATIC DP;BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE CABLE OUTLET; 15;8 X 72;2 X 36;4 MM (WXHXD); IPCD TECHOLOGY FAST CONNECT; WITHOUT PG SOCKET.

SIMATIC S7-300; CPU 314 IFM COMPACT CPU WITH MPI; 16DI/16DO; 4AI/1AO; 2 X 40 PIN; INTEGRATED 24V DC POWER SUPPLY; 24 KBYTE WORKING MEMORY

OPERATOR PANEL OP7/DP12 LC DISPLAY; LED BACKLIT 4-TIER; 20 CHARACTERS/LINE; SIMATIC S5; 505; S7; M7; NATIVE DRIVERS; PROFIBUS DP 12 MBAUD WITH UL/CSA APPROVAL

SIMOVERT MASTERDRIVES MOTION CONTROL CHASSIS UNIT INVERTER 510V - 650V DC; 92A DOCUMENTATION ON CD WITH Z OPTION.

SIMATIC DP ET200PRO SUBRACK - A5E00294876

SIMATIC S7-200; DIGITAL I/O EM 223; FOR S7-22X CPU ONLY; 4 DI / 4 DO RELAY; 5-30 V DC; 250 V AC

SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT;1 AXIS;FOR DIGITAL DRIVES;FEED+MAIN SPINDLE DRIVES

PUPITRE OPÉRATEUR SIMATIC OP 77A ÉCRAN LC RÉTROÉCLAIRÉ; ÉCRAN 4;5'' GRAPHIQUE; INTERFACE MPI-/PROFIBUS-DP JUSQU'À 1;5MB; CONFIGURABLE À PARTIR DE WINCC FLEXIBLE 2004 COMPACT HSP

SIMATIC DP; BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S WITH TILTED CABLE OUTLET; 15;8 X 54 X 39;5 MM (WXHXD); TERMINAT. RESIST. WITH ISOLAT. FUNCTION; WITH PG SOCKET

SITOP POWER 20400 VAC DC 24V/20A

SIMOTION DRIVE-BASED CONTROL UNIT D425-2 DP/PN; PROGRAMMABLE MOTION CONTROLLER; BASIC PERFORMANCE; INTERFACES: 12 DI; 16 DI/DO; 4 DRIVE-CLIQ; 2 PROFIBUS; 3 PROFINET PORTS; 2 ETHERNET; 2 USB; 1 OPTION SLOT; INCL. DUAL FAN / BATTERY MODULE AND BATTERY

SENTRON; MEASURING INSTRUMENT; 7KM PAC3200; LCD; L-L: 690 V; L-N: 400 V; MODBUS TCP; OPTIONAL MODBUS RTU / PROFINET / PROFIBUS; APPARENT / ACTIVE / REACTIVE ENERGY; CL. 0.5 ACC. TO IEC61557-12 OR CL. 0.5S ACC. TO IEC62053-22

SIMATIC S7; ANALOG INPUT SM336 6 AI; 15 BIT; FAILSAFE ANALOG INPUTS FOR SIMATIC SAFETY; WITH HART SUPPORT; UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849); 1 X 20 PIN

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD.

SIMATIC DP; TERMINAL MODULE TM-P15C23-A0 FOR ET 200S FOR POWER MODULES 15MM WIDE;SPRING-LOAD TERMINALS (CAGE CLAMP); 2X3 TERMINAL CONNECTIONS WITH TERMINAL LEAD TO AUX1; AUX1 INTERRUPTED

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AI STAND. I-2DMU 15 MM WIDE; 4 .. 20MA; 13 BIT FOR 2-WIRE TRANSDUCER CYCLE TIME 65 MS/CHANNEL WITH LED SF (GROUP FAULT)

SIMATIC S7-300; DIGITAL INPUT SM 321; OPTICALLY ISOLATED; 16DI; 24 V DC; 20 PIN

SIMATIC S7-300; ANALOG INPUT SM 331; OPTICALLY ISOLATED; U/I/THERMOCOUPLE/RESISTANCE INTERRUPT; DIAGNOSTICS; RESOLUTION 9/12/14 BITS; 8AI; REMOVE/INSERT W. BACKPLANE BUS 20 PIN

SIMATIC DP; IM151-7 CPU FOR ET200S; 96 KB WORKING MEMORY WITH INTEGRATED PROFIBUS DP INTERFACE (9 PIN SUB-D; FEMALE) AS DP SLAVE; W/O BATTERY

SIMATIC HMI KTP400 BASIC MONO PN; BASIC PANEL; KEY AND TOUCH OPERATION; 4" STN DISPLAY; 4 GRAY SCALES; PROFINET INTERFACE; CONFIGURATION FROM WINCC FLEXIBLE 2008 SP2 COMPACT/ WINCC BASIC V10.5/ STEP7 BASIC V10.5; CONTAINS OPEN SOURCE SW; WHICH IS PROVIDED FREE OF CHARGE FOR DETAILS

COMMUNICATIONS PROCESSOR CP 343-1 FOR CONNECTION OF SIMATIC S7-300 TO INDUSTRIAL ETHERNET OVER ISO; TCP/IP AND UDP; S7 COMMUNICATION; FETCH/WRITE; SEND/RECEIVE; WITH AND WITHOUT RFC1006 DIAGNOSTIC ADD-ONS MULTICAST; PBK; INITIALIZATION VIA LAN; 10/100 MBIT

EMBASE POUR ET 200S PMD POUR MODULE DE PUISSANCE POUR DEPARTS-MOTEURS

SIMATIC DP; ELECTRONIC MODULE FOR ET 200S; 2 AO I 15 MM WIDE; +/-20 MA; 13 BIT + SIGN; 4 . .20 MA; 13 BIT CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT).

SIMATIC S7-400; CP 441-2 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 2 CHANNELS INCL. CONFIG. PACKAGE ON CD

SIMATIC DP; INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER; ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D INCL. TERMINATING MODULE

SIMATIC S7-200; DIGITAL OUTPUT EM 222; FOR S7-22X CPU ONLY; 8DO; (RELAY OUTPUTS) 2A.

SINAMICS S120 CONVERTISSEUR POWER MODULE PM340 ENTREE: 380-480V CA 3PH;50/60HZ SORTIE: 4;1A CA 3PH (1;5KW) FORME BLOCKSIZE TAILLE DE CONSTRUCTION FSA REFROIDISSEMENT A AIR INTERNE

SIMATIC S7-300; CPU 317F-2DP; CENTRAL PROCESSING UNIT WITH 1024 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE DP-MASTER/SLAVE; MICRO MEMORY CARD NECESSARY FOR USE WITH SOFTWARE OPTION S7 DISTRIBUTED SAFETY V5.2 SP1 AND HIGHER

SIMATIC S7-300; COUNTER MODULE FM 350-2; 8 CHANNELS; 20 KHZ; 24V ENCODER FOR COUNTING; MEASURING FREQUENCIES; SPEED MEASUREMENT; PERIOD DURATION MEASUREMENT AND PROPORTIONING INCL. CONFIG. PACKAGE AND ELECTRONIC DOCU ON CD

SIMATIC S7-300 CPU315F-2 PN/DP; CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY; 1. INTERFACE MPI/DP 12MBIT/S; 2. INTERFACE ETHERNET PROFINET; WITH 2 PORT SWITCH; MICRO MEMORY CARD NECESSARY

SIMATIC DP; ET 200ECO PN; 16 DI 24V DC; 8 X M12; DOUBLE-ASSIGNEMENT; DEGREE OF PROTECTION IP67

SINAMICS S120 DOUBLE MOTOR MODULE ENTREE: 600V CC SORTIE: 3PH 400V; 18A/18A FORME BOOKSIZE REFROIDISSEMENT PAR AIR INT. SEQUENCES D IMPULSIONS OPTIMISEES ET SUPPORT DES FONCTIONS EXTENDED SAFETY INTEGRATED AVEC CABLE DRIVE-CLIQ.

SINUMERIK 840D/DE NCU 573.3 PENTIUM III W/O SYSTEM SOFTWARE MEMORY: NC 2.5 MB; PLC 96 KB PROFIBUS-DP PREP..

SIMATIC S5 130/150 U MEMOIRE

SINUMERIK 850 6FX1120-4BA02 COM CPU

SIPLUS HCS724I LA724I POWER OUTPUT MODULE FOR CENTRAL INTERFACE MODULE ZA724I NOTE: THE 3 MATING CONNECTORS FOR CONNECTING THE SPOTLIGHTS ARE NOT IN THE SCOPE OF SUPPLY OF POWER OUTPUT MODULE AND CAN BE ORDERED SEPARATELY UNDER ORDER NUMBER: WKF:4001

SINUMERIK HARD DISK 10 GB WITH SUPPORTING SHEET STEEL AND DAMPER FOR PCU 50/70 WITH 333/500/566/1200 MHZ

SINUMERIK 3 EPROM-MODUL OHNE EPROM

SIMODRIVE 690 AC MSD/FDD INFEED REGENERATIVE FEEDBACK MODULE 50 A

POWER SUPPLY SIDAC-S PRI:230VAC 50/60HZ SEC:30VDC.

SINUMERIK 840D SL NCU 730.3B PN AVEC PLC 317-3 PN/DP INC. MODULE DE VENTILATEUR DOUBLE MODULE DE BATTERIE

SIMOVERT MASTERDRIVES PRECHARGING RESISTOR 2 X 12 OHM

SINUMERIK 820T BASIC VERSION 3

SIMOREG SPINDLE BOARD C98043-A1210-L31-10

DISPLAY MODULE WF 470A (B/W) 1 SLOT F. MEMORY MODULE; GERMAN; ENGLISH; FRENCH; RUSSIAN

SIMATIC S5 135U CENTRAL CONTROLLER 21 SLOTS W/O PROCESSOR W/O MANUAL W.POW.SUPPLY 230/115V AC;5V 40A

MODULE ANALOG. POUR WF 706 POUR FONCTIONNEMENT DE 3 AXES; AVEC 4 ENTREES ANALOGIQUES

SIMODRIVE 610 AC FEED DRIVE POWER CIRCUIT P.C.B; A33 3/6 A; 3 AXES

SIMATIC NET; ELS TP40 ELECTRICAL LEAN SWITCH W. TWO 10/100MBIT/S INSUL. DISPLACEM. CONNECT. FOR CONFIGURING A LINE TOPOGRAPHY AND TWO 10/100 MBIT/S RJ45 PORTS 24V DC SUPPLY

COMMUNICATION PROCESSOR CP 5614 PCI CARD (32BIT)W. MASTER A. SLAVE CONN. TO PB W. DP BASE SW W. NCM PC DP-RAM INTERF. FOR DP MASTER W. PG AND FDL PROTOCOL; SINGLE LICENSE F.1 INSTALLATION; R-SW; SW+ELECTR. MAN. ON CD; CLASS A; 2 LANG. (GER; EN);EXECUT. UNDER MS WIN (32BIT) NT4.0 WS;SERVER; 2000PRO; SERVER; XP PRO

"SIMATIC NET; OSM ITP62-LD MOD. COMMUT. OPTIQUE A 2 PORTS FO 100 MBPS LONGUE DISTANCE (FO JUSQUE 26KM) ET 6 PORTS ITP 10/100 MBIT/S; 8 ENTREES TOR; ALIMENT. 24 V CC REDONDANTE; CONTACT DE SIGNALISATION; GESTIONNAIRE REDONDANCE INTEGRE AVEC GESTION RESEAU"

PB OLM/P11 V4.0 OPTICAL LINK MODULE AV. 1 RS485 ET 1 INTERFACE PLASTIQUE-FO (2 PRISES BFOC) AVEC CONTACT DE SIGNALISATION ET SORTIE MESURE; Y COMPRIS 2 CONNECTEURS BFOC

SIMADYN D; PROCESSOR MODULE PG16 LINE-COMMUTATED CONVERTERS

SIMATIC TI505 IOCC CONTROLLER; FOR TI505 PLC

SINUMERIK/SIROTEC DIGITAL OUTPUT MODULE; 32 OUTPUTS; 2.0 A

SINUMERIK 800 6FX1126-1AA04 VIDEO GRAPHICS; MONOCHROME

SIROTEC RCM 1P RC-CPU WITH SERVOINTERFACE ROBOT CONTROLLER FOR 4 AXES; ABSOLUTE AND/OR INCREMENTAL.

SINUMERIK 840C/840CE DMP COMPACT;16 OUTPUTS 24V/0.5A FLOATING

SINUMERIK FM-NC/810D/840D/840C 6FX2006-1BC01 ACCESSORIES; DISTRIBUTION BOX FOR HAND-HELD CONTROLLER AND HADN-HELD PROGRAMMER (2 EMERGENCY-OFF CHANNELS)

WS 496 KEYBOARD W. ALPHA-BLOCK PARALLEL AND SERIAL INTERFACE; DESIGN CHARCOAL; FOR CONSOLE MOUNTING

S5-210 MICROCOMPUTER SYSTEM CRT INTERFACE MODULE PROVIT W. KEYBOARD INTERFACE

SIMOVERT P. 6SE12/13 MODULE SUBRACK 470 105 7001.00

SIMATIC S5 MODULE

KEYPAD AND DISPLAY FOR THE 030 SYSTEMS

MONITOR INTERFACE MODULE 250

SIMATIC S5;375 MEMORY SUBMODULE FLASH EPROM; 8 KBYTES FOR PROGRAMMING STEP 5 V6.6 NECESSARY

SIMODRIVE 650 AC MSD P.C.B POWER SUPPLY UNIT

SINUMERIK 800 VIDEO-GRAPHICS; MONOCHROME

SIMODRIVE 6RB20 DC FDD CLOSED-LOOP CONTROL P.C.B WITHOUT ADAPTATION

SINUMERIK 800 6FX1131-5BA01 INTERFACE ACTIVE SERIAL; CP315

SINUMERIK 800; 8/MS102 MEMORY MODULE 128 KB RAM